Site seems to be OK. Load issue should be resolved now.

Some ol' frontier pistol work...

Put your range reports for all brands and types of firearms and other items.
User avatar
RanchRoper
Forum Ambassador
Posts: 12958
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Some ol' frontier pistol work...

Post by RanchRoper » Sun Nov 17, 2019 4:05 pm

Wind 70mph today, a little more than yesterday. Instead of the Henry rifle, thought I'd just take my 45 Colt revolver with me today. The 1871 Colt Richards cartridge conversion. 8" barrel, V-notch rear sight in the cocked hammer. Love shooting this pistol. Not quite the Davis Tutt /Bill Hickock 75 yd duel but I bet they didn't have a windy day...

20 yds, 1-hand, 20 rounds of 200 gr LRNFP with 6.6 gn of Universal. Real nice pistol load.

20191117_132243_resized.jpg
20191117_132243_resized.jpg (122.86 KiB) Viewed 2013 times



The revolver...

20180311_152759_resized_1.jpg
20180311_152759_resized_1.jpg (242.77 KiB) Viewed 2013 times



Short report today, but I had a great deal of fun. :)
Shoot often and safely.....RR
YourAvatar (80).jpeg
YourAvatar (80).jpeg (9.48 KiB) Viewed 2013 times

Kibler Colonial Flintlock .50

Ohkínohkomit - Shoot skillfully

User avatar
Ernie
Drover
Posts: 2553
Joined: Thu Mar 07, 2019 8:07 pm
Location: Southwestern Lower Michigan
United States of America

Re: Some ol' frontier pistol work...

Post by Ernie » Sun Nov 17, 2019 4:14 pm

You seem to have done very well despite the conditions, with 70 mph winds I might have had to tie myself down. Good looking gun.

User avatar
RanchRoper
Forum Ambassador
Posts: 12958
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Re: Some ol' frontier pistol work...

Post by RanchRoper » Sun Nov 17, 2019 4:22 pm

Thanks, the real challenge was walking out to the target board and back....holy smokes...but this pistol is 10" from rear sight to front and that helps a lot.

Kibler Colonial Flintlock .50

Ohkínohkomit - Shoot skillfully

User avatar
BigAl52
Forum Ambassador
Posts: 15048
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Some ol' frontier pistol work...

Post by BigAl52 » Sun Nov 17, 2019 4:25 pm

The grip on that looks to be a little bigger than the cattleman do you know if it is RR
Don't let the old man in


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 20434
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: Some ol' frontier pistol work...

Post by JEBar » Sun Nov 17, 2019 4:30 pm

I've fired a few rounds that if shot into a 70 mph headwind, the bullet may well not have had the get up and go necessary to get out to the barrel .... the design of the V notch in the hammer does give you a longer sight plane but its not easy for me to use .... nicely done indeed

User avatar
RanchRoper
Forum Ambassador
Posts: 12958
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Re: Some ol' frontier pistol work...

Post by RanchRoper » Sun Nov 17, 2019 4:32 pm

BigAl52 wrote:
Sun Nov 17, 2019 4:25 pm
The grip on that looks to be a little bigger than the cattleman do you know if it is RR
Yes, this has the SA Army grip, I believe the cattleman or regular Peacemaker style has the smaller Navy grip.

Kibler Colonial Flintlock .50

Ohkínohkomit - Shoot skillfully

User avatar
RanchRoper
Forum Ambassador
Posts: 12958
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Re: Some ol' frontier pistol work...

Post by RanchRoper » Sun Nov 17, 2019 4:33 pm

JEBar wrote:
Sun Nov 17, 2019 4:30 pm
I've fired a few rounds that if shot into a 70 mph headwind, the bullet may well not have had the get up and go necessary to get out to the barrel .... the design of the V notch in the hammer does give you a longer sight plane but its not easy for me to use .... nicely done indeed
Wind was more or less at my back today, so the bullets were not fighting it as much I guess.

Kibler Colonial Flintlock .50

Ohkínohkomit - Shoot skillfully

User avatar
CT_Shooter
Administrator emeritus
Posts: 5769
Joined: Mon Mar 21, 2016 8:42 am
Location: Connecticut
United States of America

Re: Some ol' frontier pistol work...

Post by CT_Shooter » Sun Nov 17, 2019 4:38 pm

Great shooting, RR. We're definitely a bunch of snowflakes down here. Seventy mile per hour winds in CT would cause a statewide advisory.

Code: Select all

Beaufort Wind Scale
0 --- Calm	less than 1 mph (0 m/s)	Smoke rises vertically
10 -- Whole gale	55 - 63 mph 24-27.5 m/s	Trees uprooted, considerable damage to buildings
11 -- Storm	64 - 73 mph 28-31.5 m/s	Widespread damage, very rare occurrence
12 -- Hurricane	over 73 mph over 32 m/s	Violent destruction
http://gyre.umeoce.maine.edu/data/gomoo ... nd_2_speed
H006M BBB .357 - H001 Classic .22LR - Uberti/Taylors & Co. SmokeWagon .357 5.5" - Uberti/Taylors & Co. RanchHand .22LR 5.5" - Colt King Cobra Carry 2" - Colt Official Police 38spl 4"

User avatar
GunnyGene
Drover
Posts: 3005
Joined: Mon Sep 03, 2018 6:15 am
Location: Monroe County, MS
United States of America

Re: Some ol' frontier pistol work...

Post by GunnyGene » Sun Nov 17, 2019 4:38 pm

You're pretty good with that big iron. :mrgreen:

https://www.youtube.com/watch?v=nWpSeuPzsKI
Bellum Omnium Contra Omnes is rapidly becoming a reality (11/2023). Para Bellum.

User avatar
RanchRoper
Forum Ambassador
Posts: 12958
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Re: Some ol' frontier pistol work...

Post by RanchRoper » Sun Nov 17, 2019 4:59 pm

GunnyGene wrote:
Sun Nov 17, 2019 4:38 pm
You're pretty good with that big iron. :mrgreen:

https://www.youtube.com/watch?v=nWpSeuPzsKI
Great tune, haven't heard it for awhile, thanks.

Kibler Colonial Flintlock .50

Ohkínohkomit - Shoot skillfully

User avatar
RanchRoper
Forum Ambassador
Posts: 12958
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Re: Some ol' frontier pistol work...

Post by RanchRoper » Sun Nov 17, 2019 5:01 pm

CT_Shooter wrote:
Sun Nov 17, 2019 4:38 pm
Great shooting, RR. We're definitely a bunch of snowflakes down here. Seventy mile per hour winds in CT would cause a statewide advisory.

Code: Select all

Beaufort Wind Scale
0 --- Calm	less than 1 mph (0 m/s)	Smoke rises vertically
10 -- Whole gale	55 - 63 mph 24-27.5 m/s	Trees uprooted, considerable damage to buildings
11 -- Storm	64 - 73 mph 28-31.5 m/s	Widespread damage, very rare occurrence
12 -- Hurricane	over 73 mph over 32 m/s	Violent destruction
http://gyre.umeoce.maine.edu/data/gomoo ... nd_2_speed
70+ is a wind warning here, basically do your coat up....we had one day here last summer at 116mph....knocked the highway wind advisory sign in the ditch.

Kibler Colonial Flintlock .50

Ohkínohkomit - Shoot skillfully

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 20434
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: Some ol' frontier pistol work...

Post by JEBar » Sun Nov 17, 2019 5:46 pm

RanchRoper wrote:
Sun Nov 17, 2019 5:01 pm
we had one day here last summer at 116mph....knocked the highway wind advisory sign in the ditch.
:lol:


that's hurricane wind territory

User avatar
Vaquero
Ranch Boss
Posts: 12147
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: Some ol' frontier pistol work...

Post by Vaquero » Sun Nov 17, 2019 6:12 pm

RR, you certainly makes us look bad, and consistently. :lol:
Nice shooting sir.
I definitely need more practice. :shock: :lol:

RP
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
Mags
Administrator
Posts: 8797
Joined: Fri Apr 13, 2018 9:40 pm
Location: Tualatin Valley Oregon
United States of America

Re: Some ol' frontier pistol work...

Post by Mags » Sun Nov 17, 2019 6:45 pm

.
Nice shooting. That windy, I wouldn't.
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234

User avatar
North Country Gal
Firearms Advisor
Posts: 6823
Joined: Thu Apr 07, 2016 12:46 pm
Location: northern Wisconsin
United States of America

Re: Some ol' frontier pistol work...

Post by North Country Gal » Sun Nov 17, 2019 7:52 pm

With a wind like that at your back, probably pushed those 45 Colt bullets into magnum country. :)

Great shooting, as always.

User avatar
BrokenolMarine
Ranch Foreman
Posts: 7480
Joined: Sat Nov 26, 2016 8:28 am
Location: South Central Oklahoma in the mountains
United States of America

Re: Some ol' frontier pistol work...

Post by BrokenolMarine » Sun Nov 17, 2019 9:45 pm

Very nice RR...
In the bad ol days, you would have been one to ride with...
A feller would know he could depend on your guns. :D
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.

I don't look back at the things I can no longer do, I just look forward to the things I still can.

User avatar
RanchRoper
Forum Ambassador
Posts: 12958
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Re: Some ol' frontier pistol work...

Post by RanchRoper » Sun Nov 17, 2019 11:02 pm

Someone shooting back is a whole other story....hope I never have to find out.

Kibler Colonial Flintlock .50

Ohkínohkomit - Shoot skillfully

User avatar
PT7
Drover
Posts: 4889
Joined: Mon Mar 21, 2016 8:32 am
Location: The Show-Me State
United States of America

Re: Some ol' frontier pistol work...

Post by PT7 » Sun Nov 17, 2019 11:16 pm

Wind at 50 mph one day and the next at 70 mph and nary any difference when shooting a rifle or revolver. If you posted some targets shot with zero wind no one would know the difference.

What is the windiest day so far that you've shredded your targets?
The big Q is what would be the windiest day you'd venture out to the range and shoot?
For instance, how close to last summer's 116 mph Alberta breeze might that be? :roll:

Thumbs-up-top-notch shootin' again.

PT7

~Пока~

User avatar
RanchRoper
Forum Ambassador
Posts: 12958
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Re: Some ol' frontier pistol work...

Post by RanchRoper » Sun Nov 17, 2019 11:27 pm

Anybody who lives in southwest Alberta will tell you that 50-60 mph winds are pretty normal. We get regular wind warnings issued. The good news is in winter these Chinooks bring warm air from the Pacific ocean.
As for shooting, sometimes it's not too bad when I leave home but 15 min later at the range it's crazy windy. I certainly would not go shoot at 100 mph...stay home and listen to the house creak...

Kibler Colonial Flintlock .50

Ohkínohkomit - Shoot skillfully

User avatar
Mags
Administrator
Posts: 8797
Joined: Fri Apr 13, 2018 9:40 pm
Location: Tualatin Valley Oregon
United States of America

Re: Some ol' frontier pistol work...

Post by Mags » Sun Nov 17, 2019 11:32 pm

.
I'd be hunkered in the basement...
RanchRoper wrote:
Sun Nov 17, 2019 11:27 pm
... I certainly would not go shoot at 100 mph...stay home and listen to the house creak...
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234

Post Reply