Site seems to be OK. Load issue should be resolved now.
Sit back and talk with friends. Same rules as before. Rule #1-Relax with friends on the front or back porch.
Rule #2-No Politics, religion or anything above a G level.
-
Vaquero
- Ranch Boss
- Posts: 12124
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville

Post
by Vaquero » Mon Feb 05, 2024 6:31 pm

- 1703780935401.png (883.3 KiB) Viewed 1164 times
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
-
BigAl52
- Forum Ambassador
- Posts: 15048
- Joined: Sun Oct 23, 2016 12:43 pm
- Location: Evans,Colorado

Post
by BigAl52 » Mon Feb 05, 2024 7:01 pm
I worked with a guy who has one of these and he isnt either a farmer or rancher he is just a pig
Don't let the old man in
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
-
RanchRoper
- Forum Ambassador
- Posts: 12955
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta

Post
by RanchRoper » Mon Feb 05, 2024 7:16 pm
Our 2005 F350 doesn't quite qualify, but won't be long.
Pedersoli Frontier Flintlock .50
Kibler Colonial Flintlock .50
Ohkínohkomit - Shoot skillfully
-
Rifletom
- Deputy Marshal
- Posts: 4010
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory

Post
by Rifletom » Mon Feb 05, 2024 7:23 pm
Just gotta love them pickem-up trucks!
-
cooperhawk
- Ranch Foreman
- Posts: 5624
- Joined: Sat Jan 12, 2019 3:27 pm
- Location: 20 miles south of the twin cities.

Post
by cooperhawk » Tue Feb 06, 2024 8:39 am
Mine is a 1983 ?Bronco that I bought new. It's a rusty trusty and when
you turn the key in the ignition the mice began to run around in the cab.
I doubt anyone will steal it but if they do, it's insured so go for it.
Retired FAA Air Traffic Control Supervisor
VFW (Life Member), VVA (Life Member)
Legion (Life Member), NRA (Life Member)
U S Army Aviation 64-67, Vietnam MACV 65-66
-
Cowboy Gun Fan
- Cowboy
- Posts: 1805
- Joined: Mon Mar 21, 2016 9:42 am
- Location: SW Virginia

Post
by Cowboy Gun Fan » Tue Feb 06, 2024 8:46 am
All my trucks have Manual Transmissions. In this day and age, it's an additional security measure.
NRA Member
-
BrokenolMarine
- Ranch Foreman
- Posts: 7471
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains

Post
by BrokenolMarine » Tue Feb 06, 2024 9:23 am
We had a 1980 Ford F150 4wd with more than 400k miles on it. The kids called it Bubba Truck. We took it into the woods to haul fire wood. We hauled huge loads of hay, mulch, gravel. Pallets of grain and feed. It was a true farm truck. Dual gas tanks, four speed tranny and first gear only good to about seven mph but would pull the house off the foundation. Dented and scratched, it wasn't pretty, but Bubba was a goer.
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
I don't look back at the things I can no longer do, I just look forward to the things I still can.
-
Hatchdog
- Ranch Foreman
- Posts: 7978
- Joined: Mon Jan 06, 2020 5:04 pm
- Location: Deer Park, WA

Post
by Hatchdog » Tue Feb 06, 2024 12:01 pm
Back in the day my dad had a 57 Chev half ton long box step side pickup. When I got my license he bought a new pickup and passed the 57 on to me with the understanding when I was done with it my brother would get it. And then when he was done our youngest brother would get it. Well it went perfectly according to plan. In fact the 1974 chev short box step side he bought new is still at my youngest brothers house. True to chevys of that time it is very rusted out with a see thru floor. And of course the fenders too. 350 with a three on the tree almost like the trucks described above but without a granny gear. Fun memories.
-
Mags
- Administrator
- Posts: 8763
- Joined: Fri Apr 13, 2018 9:40 pm
- Location: Tualatin Valley Oregon

Post
by Mags » Tue Feb 06, 2024 12:22 pm
Cowboy Gun Fan wrote: ↑Tue Feb 06, 2024 8:46 am
All my trucks have Manual Transmissions. In this day and age, it's an additional security measure.
Double sided coin on that.
I've had more manual transmission clutch wearout than auto transmission failures.
But I was replacing the clutch plates myself when I was younger and stronger.
-
Cowboy Gun Fan
- Cowboy
- Posts: 1805
- Joined: Mon Mar 21, 2016 9:42 am
- Location: SW Virginia

Post
by Cowboy Gun Fan » Tue Feb 06, 2024 1:09 pm
Mags wrote: ↑Tue Feb 06, 2024 12:22 pm
Cowboy Gun Fan wrote: ↑Tue Feb 06, 2024 8:46 am
All my trucks have Manual Transmissions. In this day and age, it's an additional security measure.
Double sided coin on that.
I've had more manual transmission clutch wearout than auto transmission failures.
But I was replacing the clutch plates myself when I was younger and stronger.
Funny you say that. I've been shifting gears for over 50 years straight now and I never wore out a Clutch yet. I've replaced some that were worn when I bought the vehicles, but never one from new or even good used. And I used to race some of them!! I've always had full size American made vehicles, if that may have made a difference.
NRA Member
-
Mags
- Administrator
- Posts: 8763
- Joined: Fri Apr 13, 2018 9:40 pm
- Location: Tualatin Valley Oregon

Post
by Mags » Tue Feb 06, 2024 2:08 pm
Cowboy Gun Fan wrote: ↑Tue Feb 06, 2024 1:09 pm
Mags wrote: ↑Tue Feb 06, 2024 12:22 pm
Cowboy Gun Fan wrote: ↑Tue Feb 06, 2024 8:46 am
All my trucks have Manual Transmissions. In this day and age, it's an additional security measure.
Double sided coin on that.
I've had more manual transmission clutch wearout than auto transmission failures.
But I was replacing the clutch plates myself when I was younger and stronger.
Funny you say that. I've been shifting gears for over 50 years straight now and I never wore out a Clutch yet. I've replaced some that were worn when I bought the vehicles, but never one from new or even good used. And I used to race some of them!! I've always had full size American made vehicles, if that may have made a difference.
One of mine was a '68 Jeep CJ5. It saw a lot of beach dune use. The other a '98 Toyota Tacoma pickup used mostly for commute and material hauling for homestead projects. Both vehicles, very high mileage on them.
-
HenryFan
- Cattle Driver
- Posts: 768
- Joined: Sat Nov 18, 2023 9:43 am
- Location: South Carolina

Post
by HenryFan » Tue Feb 06, 2024 2:50 pm
A South Carolina farmer was talking to a Texan who boasted "it takes me all day to drive across my property in my truck." The South Carolina farmer said "Yeah, I had a truck like that too."
-
Steve51
- Cattle Driver
- Posts: 758
- Joined: Mon Mar 21, 2016 6:58 am
- Location: West Union, Illinois

Post
by Steve51 » Tue Feb 06, 2024 4:46 pm
My grandpa was a farmer. I well remember his 1963 Chevy pickup. Almost exactly as you described except the dash had so many papers, receipts, tools etc on it that I know the dash had not seen a ray of sunlight since it was new.
H001, H001L, H004, H001TM, H001TLB, H006, H010, H012M, H012GR
NRA Member, GOA Member, ISRA Member, ILCCW
-
Cowboy Gun Fan
- Cowboy
- Posts: 1805
- Joined: Mon Mar 21, 2016 9:42 am
- Location: SW Virginia

Post
by Cowboy Gun Fan » Tue Feb 06, 2024 7:27 pm
Mags wrote: ↑Tue Feb 06, 2024 2:08 pm
Cowboy Gun Fan wrote: ↑Tue Feb 06, 2024 1:09 pm
Mags wrote: ↑Tue Feb 06, 2024 12:22 pm
Double sided coin on that.
I've had more manual transmission clutch wearout than auto transmission failures.
But I was replacing the clutch plates myself when I was younger and stronger.
Funny you say that. I've been shifting gears for over 50 years straight now and I never wore out a Clutch yet. I've replaced some that were worn when I bought the vehicles, but never one from new or even good used. And I used to race some of them!! I've always had full size American made vehicles, if that may have made a difference.
One of mine was a '68 Jeep CJ5. It saw a lot of beach dune use. The other a '98 Toyota Tacoma pickup used mostly for commute and material hauling for homestead projects. Both vehicles, very high mileage on them.
I had a friend that bought a '74 Chevy Nova brand new. I do not know what GM did to those cars as many had problems with them where the prior years were just fine. He knew how to drive and had Manual Trans cars all his life. But the car went through clutches like crazy. It would wear out a clutch about every 5000 miles. GM wouldn't do anything for him, just blamed it on driver error. I changed one of them myself and everything looked fine, but that one wore out too. Craziest thing I ever saw.
NRA Member
-
The Happy Kaboomer
- Cowhand
- Posts: 447
- Joined: Sun Apr 02, 2017 11:10 pm

Post
by The Happy Kaboomer » Tue Feb 06, 2024 8:51 pm
My 1996 Chevy Z71 that I bought new has been now regulated to farm work........It does not have of that SILLY CRAP mentioned the first post.....27 years old and STILL doing it's job.
-
Redthies
- Cowboy
- Posts: 1742
- Joined: Wed Aug 01, 2018 6:16 pm
- Location: Top of the 395

Post
by Redthies » Wed Feb 07, 2024 1:24 am
cooperhawk wrote: ↑Tue Feb 06, 2024 8:39 am
Mine is a 1983 ?Bronco that I bought new. It's a rusty trusty and when
you turn the key in the ignition the mice began to run around in the cab.
I doubt anyone will steal it but if they do, it's insured so go for it.
I brought home a ‘94 Bronco last week. Not sure it will hit 45 mph as Speedo is broken and it only has 1,2 and R at the moment. Windows do roll down, most lights work, and eventually it will have 4 tires the same size. I LOVE it!
When I picked it up:
-
Attachments
-

- EF19CCCF-5B2A-4140-8B9F-CC7496860E6C.jpeg (757.33 KiB) Viewed 776 times
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
-
Redthies
- Cowboy
- Posts: 1742
- Joined: Wed Aug 01, 2018 6:16 pm
- Location: Top of the 395

Post
by Redthies » Wed Feb 07, 2024 1:28 am
What I see in my brain:
-
Attachments
-

- 976753E6-C5FC-42D7-9998-316E49FD565A.jpeg (312.6 KiB) Viewed 776 times
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
-
cooperhawk
- Ranch Foreman
- Posts: 5624
- Joined: Sat Jan 12, 2019 3:27 pm
- Location: 20 miles south of the twin cities.

Post
by cooperhawk » Wed Feb 07, 2024 9:13 am
I wish mine looked that good. I think mine is beyond help with all the rust, but that
351 Cleveland is still strong and I think I could grub stumps with her.
Retired FAA Air Traffic Control Supervisor
VFW (Life Member), VVA (Life Member)
Legion (Life Member), NRA (Life Member)
U S Army Aviation 64-67, Vietnam MACV 65-66
-
Hatchdog
- Ranch Foreman
- Posts: 7978
- Joined: Mon Jan 06, 2020 5:04 pm
- Location: Deer Park, WA

Post
by Hatchdog » Wed Feb 07, 2024 10:21 am
Redthies wrote: ↑Wed Feb 07, 2024 1:24 am
cooperhawk wrote: ↑Tue Feb 06, 2024 8:39 am
Mine is a 1983 ?Bronco that I bought new. It's a rusty trusty and when
you turn the key in the ignition the mice began to run around in the cab.
I doubt anyone will steal it but if they do, it's insured so go for it.
I brought home a ‘94 Bronco last week. Not sure it will hit 45 mph as Speedo is broken and it only has 1,2 and R at the moment. Windows do roll down, most lights work, and eventually it will have 4 tires the same size. I LOVE it!
When I picked it up:
Plus you got that rare convertible model.

-
Redthies
- Cowboy
- Posts: 1742
- Joined: Wed Aug 01, 2018 6:16 pm
- Location: Top of the 395

Post
by Redthies » Wed Feb 07, 2024 11:22 pm
Hatchdog wrote: ↑Wed Feb 07, 2024 10:21 am
Plus you got that rare convertible model.
Yup. No hard top came with it. I saw one in Seattle for $250 a few months ago, but I might just order a soft top for $500. It’s all I really need.
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF