The site is experiencing issues. No one was really banned, the site was migrated to a new server. Hang in there, we are working on it.
What did you do at your reloading bench today?
- runnin n gunnin
- Cattle Driver
- Posts: 796
- Joined: Fri Nov 08, 2019 9:48 pm
- Location: Arizona

Re: What did you do at your reloading bench today?
Rain? Rain? We have heard of this myth in Arizona !
I stand for the flag, and kneel for my fallen brothers.
Re: What did you do at your reloading bench today?
I loaded 100 45 ACP. Used 230 grain lead Hi-teks over 4.3 grains of WST.
Next up, 45 Colts to shoot in the 1866 Winchester.
Next up, 45 Colts to shoot in the 1866 Winchester.
Re: What did you do at your reloading bench today?
Getting my Starline brass ready, still waiting on projectiles
First time handloading for .45-70 Gov
First time handloading for .45-70 Gov
The only government I trust is .45-70
- runnin n gunnin
- Cattle Driver
- Posts: 796
- Joined: Fri Nov 08, 2019 9:48 pm
- Location: Arizona

Re: What did you do at your reloading bench today?
Nice ! ! !
What powder and bullet are you going to use?
What powder and bullet are you going to use?
I stand for the flag, and kneel for my fallen brothers.
Re: What did you do at your reloading bench today?
Those cases are looking good!
Re: What did you do at your reloading bench today?
I recently got 4lb of IMR 4198 and just ordered some 405gr and 330gr projectiles from Bruce at Montana Bullet Works
I'm looking for a mild-er load with the 330gr and I'm gonna work up the 405gr to a full power load
For primers I have a bunch of CCI 400, 450mag, BR4, Fed GM205
Any suggestions are very welcome as it is my first rodeo with .45-70
Thanks in advance Mark N
I'm looking for a mild-er load with the 330gr and I'm gonna work up the 405gr to a full power load
For primers I have a bunch of CCI 400, 450mag, BR4, Fed GM205
Any suggestions are very welcome as it is my first rodeo with .45-70
Thanks in advance Mark N
The only government I trust is .45-70
Re: What did you do at your reloading bench today?
Looks like 40 - 44gr of IMR 4198 with 330gr and 36.5 - 40.5gr with the 405gr according to Lyman 49th Edition
The only government I trust is .45-70
Re: What did you do at your reloading bench today?
don't wanna hijack this thread, maybe I should start one in the reloading subforum
The only government I trust is .45-70
- runnin n gunnin
- Cattle Driver
- Posts: 796
- Joined: Fri Nov 08, 2019 9:48 pm
- Location: Arizona

Re: What did you do at your reloading bench today?
Hey quest, don't worry about tying up the thread, this is what its for.
Below are some results of my loads for my 45-70. All were 5 round groups shooting at 50 yards, iron sights, bench rest position shooting 405 grain bullets.
Between Hunters and Missouri Bullets, I favor MB hands down (you will find a lot of the members use MB). You can see that I had tighter groups with the MB than Hunters.
I load either IMR4198 or H332 with pretty equal results and to this point really don't prefer one over the other, which gives me some nice flexibility for available powder. (I dropped 36.5 grains of IMR4198 and 43.5 of H322 for both bullet types)
So load em up and let us know what the results are !
Below are some results of my loads for my 45-70. All were 5 round groups shooting at 50 yards, iron sights, bench rest position shooting 405 grain bullets.
Between Hunters and Missouri Bullets, I favor MB hands down (you will find a lot of the members use MB). You can see that I had tighter groups with the MB than Hunters.
I load either IMR4198 or H332 with pretty equal results and to this point really don't prefer one over the other, which gives me some nice flexibility for available powder. (I dropped 36.5 grains of IMR4198 and 43.5 of H322 for both bullet types)
So load em up and let us know what the results are !
I stand for the flag, and kneel for my fallen brothers.
Re: What did you do at your reloading bench today?
quest450, What 45-70 rifle are you loading for?