What did you do at your reloading bench today?

[Kissmybrass]

How much HS-6 are you using under those?

I went on the high end of this since it's for the rifle. So 9.5

HS-6.3_357.png

I will be interested to see how it shoots for you. I have a 7 or 8 lbs of HS-6 and have been using it in 40 S&W and 357. I came up with 9.2 grains for my loads under a Roze Dist. Zero bullet 158 gr HP.

I'm loving this combination!

Hornady 158 HS_6 copy.jpg (286.88 KiB) Viewed 1771 times

Magtech.jpg (277.69 KiB) Viewed 1771 times

[BigAl52]

Looks good with the xtp bullets. Were you shooting off hand or off the bench

[Kissmybrass]

On the bench with a sandbag Really happy with that octagon barreled rifle

[Hatchdog]

Hey Brass, that’s some nice shooting and a great example of the accuracy gained by reloading.

Here’s a caution for you when loading for pistol caliber rifles. Some manuals will show different data for handguns and rifles with the rifle data showing a higher starting point and a lower max. Reason for this is when shooting with a revolver quite a bit of gas pressure is released by the gap between the cylinder and the barrel. Thus creating less pressure in the barrel. However when shooting in a rifle this pressure release doesn’t happen so the barrel receives the max pressure.

Now, having said this I have no idea if your load is a possible problem. I didn’t look it up and if you’re not getting any signs of pressure wonderful. I shoot the XTP with H110 from my Big Boy Steel with great results similar to yours.

[Kissmybrass]

Just finished 50 .357 mags with 158 XTP and 125 XTP. HS-6 powder. I need to find large rifle primers... have powder and a lot of 45-70 brass and bullets just waiting.

[BigAl52]

Im thinking since Roze Dist doesn’t have any 158gr hp I will be checking out some 158 grhp plated bullets from xtreme bullets. Ive shot quite a few of there bullets with good results

[Kissmybrass]

How about Berry's bullets? Found 250 count 158 flat nose FMJs - any good?

[BigAl52]

Ive shot Berrys before Darin but I like xtreme better. I also think I get better accuracy with a hollow point. Ive not ever achieved the accuracy with the flat point that I have with a hollow point

[Vaquero]

Alright Al, I went ahead and loaded 10 of those 255 grainers over that 3031 load you shared.
I'll give 'em a try later today after me chores.

RP

[fortyshooter]

Will start loading up more .44 Specials to replace what I shot up over the weekend. The 6.0 Unique load shot well with the MB 240 gr. bullet with speeds 760-790 FPS range out the 7.5 revolver barrel. 5.0 Red Dot was in the 775-800 range which is good and accuracy good too.

[Rifletom]

Went in the shop to load some .45 acp, but, first checked my inventory on those. No need to load any right now, I need to empty some of what I have.
LOTS of those already to go! Some with 5.4gr Universal and a bunch with either 5.6-6.0gr Unique. All with 230gr LRN. Plus, 2-1/2 3lb coffee cans of brass for it. I'm really starting to think .45 acp cases reproduce in the shop! Lordy I have a lot of those. Going to rain all day, might load some anyway.

[Vaquero]

Put together a few 30-30's, 170 gr. Speer Hot cors over some 3031.
May take it Sat. morn for the deer opener.

RP

[runnin n gunnin]

FYI Boys, Midway has CCI 550 Small Pistol Primers, just ordered two bricks. Get em while you can.

[Vaquero]

FYI Boys, Midway has CCI 550 Small Pistol Primers, just ordered two bricks. Get em while you can.

Looks like they is already gone.

RP

[gpraceman]

Looks like they is already gone.

Gots to be fast on the mouse.

Midway has primers pretty frequently these days, but they still go fast once they show up on the website.

[Shakey Jake]

Loaded up 50+ loads of .223 yesterday. Sure wish I noticed that Midway thread in a timely manner although I do have some on hand.
Jake

Edit: They had some Federal Premium Gold Medal Small Pistol Match Primers today so I got a brick. I see that they're already sold out.

[gpraceman]

You could join the Reloading Discord and set it to notify you when certain components, like primers, are available. There are state channels there as well, where you can work out trades with local folks or get intel on what is showing up on store shelves. Because of my state channel, I've managed to snag some bricks of primers locally, saving shipping and hazmat costs.

[Shakey Jake]

You could join the Reloading Discord and set it to notify you when certain components, like primers, are available. There are state channels there as well, where you can work out trades with local folks or get intel on what is showing up on store shelves. Because of my state channel, I've managed to snag some bricks of primers locally, saving shipping and hazmat costs.

OkAY, JOINED but how do you set for notifications? I can't find the tab.
Jake

[gpraceman]

OkAY, JOINED but how do you set for notifications? I can't find the tab.
Jake

Under START HERE, go to the #notification-selection channel and click on the different things you want to be notified for.

The #in-stock-notifications channel lists the items that people have posted or bots have found. When it shows up there, you've got to be quick, especially with primers and popular powders.

[Kissmybrass]

I'll give you one guess!!!