What did you do at your reloading bench today?

Post by **Grunt67** » Thu May 21, 2020 9:40 am

My 100 Hornady 300 gr. JHP bullets arrived this AM.

Post by **fortyshooter** » Thu May 21, 2020 6:37 pm

Loading up .45-70 rounds using 500 gr. bullet with 50 gr. of Alliant Black MZ powder. Haven't tried the big torpedo's with the MZ but have so with 405 gr. bullets. These for the 1895 High Wall.

Post by **fortyshooter** » Thu May 21, 2020 6:39 pm

Shakey Jake wrote: ↑
Thu May 21, 2020 9:24 am
I loaded some 45 ACP, 45 LC and 44 SPCL over the last couple of days. I'm taking a rest today. Going to the range tomorrow to shoot 'em all up!
Jake

Sounds like a load of fun!

Post by **runnin n gunnin** » Thu May 21, 2020 7:00 pm

Nice 40-S, I have the same aluminum funnel with about the same dents. Who made the 405s?

Post by **JEBar** » Thu May 21, 2020 8:28 pm

6 packs of 100 Nosler 44 caliber 240 gr JHP BLEMS arrived from Shooter's Pro Shop .... they will be packed for our June trip to South Dakota .... I hope to be able to load them for use while we are traveling

Post by **Grunt67** » Thu May 21, 2020 9:41 pm

Been loading up the 45/70 bullets I got today. Trouble is, once I get that done, I have to go out & empty some brass & start over again.
It's a dang rotten job, but some bodys' gotta do it. Right?

Post by **fortyshooter** » Thu May 21, 2020 9:42 pm

runnin n gunnin wrote: ↑
Thu May 21, 2020 7:00 pm
Nice 40-S, I have the same aluminum funnel with about the same dents. Who made the 405s?

Those were by Oregon Trail Laser Cast.

Post by **runnin n gunnin** » Thu May 21, 2020 9:51 pm

Thanks 40, looking forward to the finished product and range report.

Post by **BigAl52** » Thu May 21, 2020 11:09 pm

Use to shoot 540gr Paul Jones Creedmore bullets with 68 grains of swiss 2FG. But had to pull that bullet out to the second grease groove to do it.

Post by **Grunt67** » Fri May 22, 2020 1:10 am

BigAl52 wrote: ↑
Thu May 21, 2020 11:09 pm
Use to shoot 540gr Paul Jones Creedmore bullets with 68 grains of swiss 2FG. But had to pull that bullet out to the second grease groove to do it.

Al, who do you and forty get your bullets from, the Navy? Has to be a torpedo.

Post by **BigAl52** » Fri May 22, 2020 8:45 am

Did someone mention Torpedos

: IMG_1375.JPG (167.55 KiB) Viewed 2793 times

Post by **runnin n gunnin** » Fri May 22, 2020 10:21 am

Yup, I see it . . . .

: external-content.duckduckgo.com.png (206.98 KiB) Viewed 2791 times

I also see that bag of nice MB .357s in the background !

Post by **Grunt67** » Fri May 22, 2020 10:36 am

BigAl52 wrote: ↑
Fri May 22, 2020 8:45 am
Did someone mention Torpedos

IMG_1375.JPG

Durn, Al, I couldn't afford the powder for one of them.

Post by **BigAl52** » Fri May 22, 2020 10:48 am

Those are 45-100 Grunt. 87grs of 1FG and thats the 540 grain Paul Jones Creedmore bullet. cast by yours truly when I was still casting bullets.

RnG yes sir the pugnose MC bullets are great for 357 thanks to Rifletom. Probably will be my primary load for 357.

Post by **runnin n gunnin** » Fri May 22, 2020 10:57 am

RT turned me onto MB, love the 405 grn Buffalo, the .45 Cowboy #1, and the 180 grn .357 Strikers. I have not tried the pugnose yet. Wanted to make a sample order of 100 bullets, but they are not doing the sample packs right now.

Post by **fortyshooter** » Fri May 22, 2020 12:48 pm

I got the 500's from Matt's Bullets and had about 20 left. Decided to try them with Black MZ powder.
Might get down to the range in a few days to try them out.

Post by **Grunt67** » Fri May 22, 2020 9:12 pm

Well, I'm all caught up on 45/70. Reckon I'll do some more
9mm, not that I need any, just because I can, LOL.

Post by **Rifletom** » Sat May 23, 2020 12:06 am

I cannot believe I'm out of empty .357 and . 45 Colt cases to load! Know what that means? Head to the desert or the range and empty some of those cases. Preferably the desert. Besides, I have a few .45 Colt loaded with BE -86 to try out. Never know!

Post by **Grunt67** » Sat May 23, 2020 4:27 pm

Rifletom wrote: ↑
Sat May 23, 2020 12:06 am
I cannot believe I'm out of empty .357 and . 45 Colt cases to load! Know what that means? Head to the desert or the range and empty some of those cases. Preferably the desert. Besides, I have a few .45 Colt loaded with BE -86 to try out. Never know!

Best way to get once fired brass. I know of. More fun too.

Post by **runnin n gunnin** » Sat May 23, 2020 4:59 pm

Just finished loading 200 rounds .357 in 110 grain and 158 Grain Hornady XTP. They are broken up into 6 sets. Half are 110 are over Bullseye, the other half over Unique, same thing with the 158s. I want to Chrono different loads in the blackhawk and El Patron and Henry.

: 20200523_092829.jpg (209.41 KiB) Viewed 3240 times

I then loaded up come 45 Colts. I did rounds for the pistols (Blackhawk and single six) 200 grain XTPs half with Bullseye, the other half with HS-6.

Also loaded two different loads for the Henry with HS-6 using 250grn MB Cowboy #1

: 20200523_123320.jpg (229.73 KiB) Viewed 3240 times

.45s on the top and .357's on the bottom.

Next off the the range !

Henry Rifle Forums

What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?