The site is experiencing issues. No one was really banned, the site was migrated to a new server. Hang in there, we are working on it.

What did you do at your reloading bench today?

All things reloading here
Post Reply
User avatar
runnin n gunnin
Cattle Driver
Posts: 796
Joined: Fri Nov 08, 2019 9:48 pm
Location: Arizona
United States of America

Re: What did you do at your reloading bench today?

Post by runnin n gunnin » Sun Nov 14, 2021 9:57 am

Rain? Rain? We have heard of this myth in Arizona !
I stand for the flag, and kneel for my fallen brothers.

User avatar
NHshtr
Cowhand
Posts: 191
Joined: Mon Dec 14, 2020 7:50 am
Location: Southern NH
United States of America

Re: What did you do at your reloading bench today?

Post by NHshtr » Mon Nov 15, 2021 8:10 pm

I loaded 100 45 ACP. Used 230 grain lead Hi-teks over 4.3 grains of WST.
Next up, 45 Colts to shoot in the 1866 Winchester.

User avatar
quest450
Tenderfoot
Posts: 27
Joined: Fri Oct 01, 2021 10:25 am
United States of America

Re: What did you do at your reloading bench today?

Post by quest450 » Tue Nov 16, 2021 11:07 am

Getting my Starline brass ready, still waiting on projectiles
First time handloading for .45-70 Gov

B7933642-6C2F-4FCC-B330-49857DA2FCA8.jpeg
B7933642-6C2F-4FCC-B330-49857DA2FCA8.jpeg (264.83 KiB) Viewed 780 times
A0D0D679-269B-4643-A771-01822C7F6B6B.jpeg
A0D0D679-269B-4643-A771-01822C7F6B6B.jpeg (136.7 KiB) Viewed 780 times
8881F46D-4B69-4D18-A5DB-515B92663D4D.jpeg
8881F46D-4B69-4D18-A5DB-515B92663D4D.jpeg (227.17 KiB) Viewed 780 times
The only government I trust is .45-70

User avatar
runnin n gunnin
Cattle Driver
Posts: 796
Joined: Fri Nov 08, 2019 9:48 pm
Location: Arizona
United States of America

Re: What did you do at your reloading bench today?

Post by runnin n gunnin » Tue Nov 16, 2021 11:14 am

Nice ! ! !
What powder and bullet are you going to use?
I stand for the flag, and kneel for my fallen brothers.

User avatar
NHshtr
Cowhand
Posts: 191
Joined: Mon Dec 14, 2020 7:50 am
Location: Southern NH
United States of America

Re: What did you do at your reloading bench today?

Post by NHshtr » Tue Nov 16, 2021 11:49 am

Those cases are looking good!

User avatar
quest450
Tenderfoot
Posts: 27
Joined: Fri Oct 01, 2021 10:25 am
United States of America

Re: What did you do at your reloading bench today?

Post by quest450 » Tue Nov 16, 2021 3:40 pm

I recently got 4lb of IMR 4198 and just ordered some 405gr and 330gr projectiles from Bruce at Montana Bullet Works
I'm looking for a mild-er load with the 330gr and I'm gonna work up the 405gr to a full power load
For primers I have a bunch of CCI 400, 450mag, BR4, Fed GM205

Any suggestions are very welcome as it is my first rodeo with .45-70

Thanks in advance Mark N
The only government I trust is .45-70

User avatar
quest450
Tenderfoot
Posts: 27
Joined: Fri Oct 01, 2021 10:25 am
United States of America

Re: What did you do at your reloading bench today?

Post by quest450 » Tue Nov 16, 2021 3:48 pm

Looks like 40 - 44gr of IMR 4198 with 330gr and 36.5 - 40.5gr with the 405gr according to Lyman 49th Edition
The only government I trust is .45-70

User avatar
quest450
Tenderfoot
Posts: 27
Joined: Fri Oct 01, 2021 10:25 am
United States of America

Re: What did you do at your reloading bench today?

Post by quest450 » Tue Nov 16, 2021 3:50 pm

don't wanna hijack this thread, maybe I should start one in the reloading subforum
The only government I trust is .45-70

User avatar
runnin n gunnin
Cattle Driver
Posts: 796
Joined: Fri Nov 08, 2019 9:48 pm
Location: Arizona
United States of America

Re: What did you do at your reloading bench today?

Post by runnin n gunnin » Tue Nov 16, 2021 8:33 pm

Hey quest, don't worry about tying up the thread, this is what its for.

Below are some results of my loads for my 45-70. All were 5 round groups shooting at 50 yards, iron sights, bench rest position shooting 405 grain bullets.

Between Hunters and Missouri Bullets, I favor MB hands down (you will find a lot of the members use MB). You can see that I had tighter groups with the MB than Hunters.

I load either IMR4198 or H332 with pretty equal results and to this point really don't prefer one over the other, which gives me some nice flexibility for available powder. (I dropped 36.5 grains of IMR4198 and 43.5 of H322 for both bullet types)

So load em up and let us know what the results are !
45-70 data.JPG
45-70 data.JPG (93.9 KiB) Viewed 904 times
I stand for the flag, and kneel for my fallen brothers.

Travlin
Cowboy
Posts: 1502
Joined: Mon Mar 21, 2016 1:06 am

Re: What did you do at your reloading bench today?

Post by Travlin » Tue Nov 16, 2021 8:52 pm

quest450, What 45-70 rifle are you loading for?

Post Reply