Ruger releases it"s version of the Heritage Rough Rider

[dddrees]

https://www.ruger.com/products/wrangler/models.html

[BigAl52]

I wonder if the bore size is the same as the Single Six.

[Cofisher]

That looks like a great trainer.

[Cowboy Gun Fan]

Interesting gun, but I like the looks of my Rough Rider better.

I do like the idea of the Safety in comparison and I like the Ruger quality, but not enough for me to trade in my RR for it.

[Vaquero]

Interesting gun, but I like the looks of my Rough Rider better.

I do like the idea of the Safety in comparison and I like the Ruger quality, but not enough for me to trade in my RR for it.

I wouldn't trade either of the RR's I have but, for what you will most likely pick them up for I'll try one.
Y'all already know I'm a Ruger fan.

RP

[North Country Gal]

Actually, an aluminum frame Single Six is nothing new. If you go back far enough in the history of the Single Six - back into the late 50s - Ruger made an aluminum frame version of the Single Six called the Lightweight, now a Ruger collectible. The Colt Frontier Scout 22 LR SA was being made at the same time and it also had an aluminum frame. The more things change, the more they stay the same.

[Ojaileveraction]

I was just looking at those on "sale" at a sportmans multi store.
I have a H&R 650 and have always had worries about the trigger setup.
It a fun piece but not safe.
The transfer bar sounds interesting

[RanchRoper]

A 7 1/2" barrel would look good.

[Henry88]

There's a thread over at RFC with a bit more info. Someone said that they preordered one for $179, don't know if that's true.

I'm wondering if it loads like a Colt (half cock) or a single six?

I can't get into any of the colors. I'm thinking single six grips will fit?

People already flaming it before it's even out

I agree they don't look as good as the RRs, but I'm trying to picture them with wood grips

[Bugs]

I have already decided to get one of these for my Grandson to learn to shoot with. Rumored to have aluminum frame, some have mentioned possibility of zinc stamping for grip frame?? Cerakote over the aluminum frame was smart choice. I have seen pricing for $179.00 at one on-line dealer when they become available. For $179 what's not to like?

[dddrees]

There's a thread over at RFC with a bit more info. Someone said that they preordered one for $179, don't know if that's true.

I'm wondering if it loads like a Colt (half cock) or a single six?

I can't get into any of the colors. I'm thinking single six grips will fit?

People already flaming it before it's even out

I agree they don't look as good as the RRs, but I'm trying to picture them with wood grips

Being one of those that prefer the Single Six or better yet Stainless Steel vs Alloy I was one who commented. But frankly I don’t see that as flaming. I also commented that I thought it a good business move by Ruger by providing something in this price range. It does appear the one review I read comments on how well made it was for that price range the Ruger was. Something frankly I would expect from Ruger as well. Granted you will hear how Ruger has some QC issues from time to time but there guns are pretty well made and their customer service is the best.

Anyway something like this isn’t for me for a couple of reasons however for the price range if it were I would imagine after doing my due diligence I would probably choose the Wrangler over the Heritage 22. I think the main thing it’s missing currently is that 22 mag cylinder.

[Vaquero]

Actually, an aluminum frame Single Six is nothing new. If you go back far enough in the history of the Single Six - back into the late 50s - Ruger made an aluminum frame version of the Single Six called the Lightweight, now a Ruger collectible. The Colt Frontier Scout 22 LR SA was being made at the same time and it also had an aluminum frame. The more things change, the more they stay the same.

NCG, I had one of the Colt Frontiers, and foolishly let a neighbor/friend talk me out of it.
Was a sweet little pistol.

RP

[markiver54]

Have never owned a rim fire revolver, but have considered it many times.
Both the RR and the Wrangler are in the affordable catagory for me. These are both options to keep on the radar!
I do think I would like to have the magnum capability though.

[North Country Gal]

I've owned practically a boatload of Single Sixes over the years and most of them came with the extra 22 mag cylinder. To be honest, though, I only bothered with the 22 mag cylinder once in a blue moon. Really had no practical use for it. Having the extra 22 mag cylinder is a great idea on paper, but unless you have a specific need for a 22 mag, I wouldn't let the extra cylinder be much of an influence on your decision.

[JEBar]

Having the extra 22 mag cylinder is a great idea on paper, but unless you have a specific need for a 22 mag, I wouldn't let the extra cylinder be much of an influence on your decision.

been there and do agree .... my 22LR cylinders were heavily used, while the 22 Mag cylinders remained virtually unused

[markiver54]

I've owned practically a boatload of Single Sixes over the years and most of them came with the extra 22 mag cylinder. To be honest, though, I only bothered with the 22 mag cylinder once in a blue moon. Really had no practical use for it. Having the extra 22 mag cylinder is a great idea on paper, but unless you have a specific need for a 22 mag, I wouldn't let the extra cylinder be much of an influence on your decision.

Thank you NCG. Makes sense!
I guess another reason I have hesitated this long is knowing I cannot afford more than one...maybe two models.
Because of that, don't know if I want to go D/A or S/A. Have never owned a S/A.

[Vaquero]

I have both and the SA's are shot more.

20190420_095740.jpg

For only $180 bucks I will try one, going to town in a bit.
I'll swing by one of the local shops I like, and see ifn he has one.
The H&R 949 at the top and the Rossi at the bottom are DA's

RP

[North Country Gal]

Confession time, here, but I actually prefer shooting SA revolvers to DA revolvers and not just for the western tradition thing. With the grip I use on SA revolvers (cowboy action style with pinky under the grip), I can actually shoot them with very consistent accuracy. Take a look at my last range report, as an example.

Also, in timed tests I've done, shooting an SA revolver i 45 ACP, two hands, cowboy style, versus shooting a DA revolver in DA and even versus a 1911, my follow up speed and accuracy was actually the best in the SA over DA shooting in the DA revolver and even a touch better than the 1911. The one disadvantage for me, is that if I had to shoot one-hand, instead of two, I'd be much slower with the SA revolver. On the other hand, for me, nothing faster to draw from a holster and point than a good SA revolver.

Bottom line: don't sell the SA revolver, short, in the performance category. For me, the SA revolver is still a very PRACTICAL shooting tool.

[markiver54]

Confession time, here, but I actually prefer shooting SA revolvers to DA revolvers and not just for the western tradition thing. With the grip I use on SA revolvers (cowboy action style with pinky under the grip), I can actually shoot them with very consistent accuracy. Take a look at my last range report, as an example.

Also, in timed tests I've done, shooting an SA revolver i 45 ACP, two hands, cowboy style, versus shooting a DA revolver in DA and even versus a 1911, my follow up speed and accuracy was actually the best in the SA over DA shooting in the DA revolver and even a touch better than the 1911. The one disadvantage for me, is that if I had to shoot one-hand, instead of two, I'd be much slower with the SA revolver. On the other hand, for me, nothing faster to draw from a holster and point than a good SA revolver.

Bottom line: don't sell the SA revolver, short, in the performance category. For me, the SA revolver is still a very PRACTICAL shooting tool.

Thank you again NCG. I think you just answered my post to Vaquero very well.
His take on it would be interesting as well.

Well; went back to look and appears my post to Vaquero got lost in that black hole.

[markiver54]

I have both and the SA's are shot more.

20190420_095740.jpg

For only $180 bucks I will try one, going to town in a bit.
I'll swing by one of the local shops I like, and see ifn he has one.
The H&R 949 at the top and the Rossi at the bottom are DA's

RP

VERY nice collection Vaquero!