Remington Arms to New York State. Bye bye.

[cooperhawk]

Remington, one of the world’s largest gun manufacturers, will on Monday announce they are bringing over 2,000 jobs to Alabama. Most of the jobs will be relocated from their Ilion, NY plant, and the initial investment in Alabama will be $87 million.
Founded in 1816 in upstate New York, the company is one of the nation’s oldest continuously operating manufacturers. Remington is the only U.S. manufacturer of both firearms and ammunition products and one of the largest domestic producers of shotguns and rifles.

[ESquared]

I'm guessing they're seeking a better "climate," in every sense of the word...

[Mistered]

Yep - same thing with Weatherby except to Wyoming:

Adam Weatherby stood on the busy 2018 SHOT Show floor and explained that after 73 years, the historic rifle and shotgun company is pulling up its California roots and moving to a friendlier locale.

[GFK]

I came across this news about the move. It is 5 years old though. But, it states the same info as listed above:

https://yellowhammernews.com/shelby-app ... -counties/


Below is from last year. Is there something more recent?

https://www.al.com/news/huntsville/2018 ... al_wo.html

[Mags]

.
That first url goes to something about a coal fired power plant....

I think this is the one you meant:
https://yellowhammernews.com/ted-nugent ... remington/

I came across this news about the move. It is 5 years old though. But, it states the same info as listed above:

https://yellowhammernews.com/shelby-app ... -counties/


Below is from last year. Is there something more recent?

https://www.al.com/news/huntsville/2018 ... al_wo.html

[Mags]

...
and this one from 3yrs ago https://yellowhammernews.com/remington- ... o-alabama/

[John E Davies]

And Check-Mate Industries is moving out of NY to Georgia.

https://dailycaller.com/2019/01/23/anot ... -new-york/

Good. The more the merrier. Are there actually many firearm related manufacturers left there? Kimber and Kahr have gone...

John Davies
Spokane WA

[SD MEPPS]

I live about 15 miles from Ilion, NY and heard nothing of this in the local news. I believe it’s only a matter of time before Remington leaves NY State for good though.

[fortyshooter]

Wonder how many employees will go with them to Alabama!

[Henry88]

Remington, what can I say................

[Vaquero]

Remington, one of the world’s largest gun manufacturers, and is the only U.S. manufacturer of both firearms and ammunition products and one of the largest domestic producers of shotguns and rifles.

But they still can't produce a consistently good quality Marlin lever gun, even after nearly TEN years.

RP

[GFK]

.
That first url goes to something about a coal fired power plant....

I think this is the one you meant:
https://yellowhammernews.com/ted-nugent ... remington/

I came across this news about the move. It is 5 years old though. But, it states the same info as listed above:

https://yellowhammernews.com/shelby-app ... -counties/


Below is from last year. Is there something more recent?

https://www.al.com/news/huntsville/2018 ... al_wo.html

Interesting. It seems the link is no longer available. But, it seems like there is not any recent news about the move also

[Mags]

.
the page says: "Updated 3 weeks ago; Posted 1 yr ago"

...Below is from last year. Is there something more recent?
https://www.al.com/news/huntsville/2018 ... al_wo.html
... it seems like there is not any recent news about the move ...

[GFK]

I do not want to beat a dead horse. But, the same data was posted on a fellow lever site (Marlin):

https://www.marlinowners.com/forum/gene ... e-bye.html

[Henry88]

Taurus building a huge production plant in Georgia. Wheres that thumbs up emoji ?

[daytime dave]

I have friends in Ilion NY. I got a private tour of the Remington factory back when they used to give tours. I was fascinated by the fine craftsmen who were working on the high end custom items at the beginning of the tour. I also felt bad that they worked and were kind of on display for us. It was an impressive place. I feel fortunate to have seen it.

[Flinch]

Taurus building a huge production plant in Georgia. Wheres that thumbs up emoji ?

I have had multiple problems with Taurus firearms I have personnaly owned or owned by close friends. I give Taurus and big thumbs down until their quality control sees a drastic improvement.

Politics is driving alot of firearm manufacturers to migrate to an area with a friendlier political climate. Illinois' politics have driven Lewis Machine Tool out of Illinois into Iowa along with hundreds of good paying jobs.

[Henry88]

Taurus building a huge production plant in Georgia. Wheres that thumbs up emoji ?

I have had multiple problems with Taurus firearms I have personnaly owned or owned by close friends. I give Taurus and big thumbs down until their quality control sees a drastic improvement.

Politics is driving alot of firearm manufacturers to migrate to an area with a friendlier political climate. Illinois' politics have driven Lewis Machine Tool out of Illinois into Iowa along with hundreds of good paying jobs.

I'm not sure I would buy one myself either, but if they start making them in the USA I will certainly give them a second look; I like their prices

[Mags]

.
I have a Taurus that shoots .45LC. Although I hate shooting it (killer and the hand and wrist), it's reliable and well made. No quality issues. Made in Brazil, so at least made in the Western hemisphere.

Taurus building a huge production plant in Georgia. Wheres that thumbs up emoji ?

I have had multiple problems with Taurus firearms I have personnaly owned or owned by close friends. I give Taurus and big thumbs down until their quality control sees a drastic improvement.

Politics is driving alot of firearm manufacturers to migrate to an area with a friendlier political climate. Illinois' politics have driven Lewis Machine Tool out of Illinois into Iowa along with hundreds of good paying jobs.

I'm not sure I would buy one myself either, but if they start making them in the USA I will certainly give them a second look; I like their prices

[Mistered]

The one and only Taurus I ever owned (a Mod 605 I got in trade) is a really great gun. Tight, excellent trigger and very accurate for a snub.
Also many Taurus guns I have either looked at or shot have been pretty good also.
I have however seen some that were not so good as well - Hey they ain't pre lock Smith & Wessons!