Skinner Sights

Skinner Sights · Post by **Skinner Sights** » Wed Mar 23, 2016 3:25 am

At Skinner Sights we love Henry rifles. Since the beginning, we have followed Henry's progress and model lineup closely. We are all things Henry! I believe we make peep/aperture sights for every Henry model except the AR-7 and have planned to make mods for those too at some point.

If you have any sight questions I'd be glad to answer them best we can.

Please check out our complete lineup at http://www.skinnersights.com/henry_rifles_18.html

Hope that helps!

Andy

Post by **Steve51** » Wed Mar 23, 2016 6:32 am

Thanks Andy! Glad you are part of this forum.

Post by **Sir Henry** » Wed Mar 23, 2016 9:36 am

You do a great job modifying the front sight/barrel band on the H001 to accept the dovetail sights. I don't think you make a sight for the Mini Bolt Youth.

Skinner Sights · Post by **Skinner Sights** » Wed Mar 23, 2016 11:17 am

We do make a sight for the Mini Bolt Youth.

Barrel mount sight. We also built a few one off's for a boy scout project.

Post by **Sir Henry** » Wed Mar 23, 2016 12:08 pm

Skinner Sights wrote:We do make a sight for the Mini Bolt Youth. Barrel mount sight. We also built a few one off's for a boy scout project.

I wish I had known that a year ago. I bought a Mini Bolt Youth and donated it to the range youth program. It was being shot alongside some very high end rifles.

Skinner Sights · Post by **Skinner Sights** » Wed Mar 23, 2016 12:12 pm

I had some test models here 5 years ago. Put some sights on them, shot a bunch of gophers with em and sent them back to Henry. Nice little rifles!

Wisconsin Shooter · Post by **Wisconsin Shooter** » Sat May 14, 2016 1:41 pm

Rec'd my Skinner Express yesterday, mounted it an headed to the range. Shoots a little high with the Henry front sight with full adjust at the peep will be OK for now. Great for sight. Thanks Andy.

Post by **JEBar** » Sun May 15, 2016 3:42 pm

is it possible to install this type of flip-up peep sight on a Henry center fire rifle .... if so, does Skinner offer them

Post by **Sir Henry** » Sun May 15, 2016 4:47 pm

JEBar wrote:is it possible to install this type of flip-up peep sight on a Henry center fire rifle .... if so, does Skinner offer them

I don't think Andy makes tang sights but many others do.

http://www.buffaloarms.com/Products.aspx?CAT=3750

Post by **JEBar** » Sun May 15, 2016 5:11 pm

Sir Henry wrote:
JEBar wrote:is it possible to install this type of flip-up peep sight on a Henry center fire rifle .... if so, does Skinner offer them
I don't think Andy makes tang sights but many others do.

http://www.buffaloarms.com/Products.aspx?CAT=3750

I didn't see any on their website, just wanted to make sure

Whaler · Post by **Whaler** » Wed May 18, 2016 7:15 pm

JEBar wrote:is it possible to install this type of flip-up peep sight on a Henry center fire rifle .... if so, does Skinner offer them

That is my Frontier with a Marbles #009825 tang sight and I used a Lyman 17AML for the front. It's a very well made sight and I think it should stand up to a centerfire. I bought the sights from Midway USA.

Post by **JEBar** » Wed May 18, 2016 8:01 pm

JEBar wrote:is it possible to install this type of flip-up peep sight on a Henry center fire rifle .... if so, does Skinner offer them

I like a peep sight installed so that when you look through it you are looking through the buckhorn sight and seeing the front sight .... I don't like a peep that replaces the factory rear sight .... I prefer the ones that gives you a three point sight picture .... but that's just me .... folks should use whatever they like best

Henry Rifle Forums

Skinner Sights

Skinner Sights

Re: Skinner Sights

Re: Skinner Sights

Re: Skinner Sights

Re: Skinner Sights

Re: Skinner Sights

Re: Skinner Sights

Re: Skinner Sights

Re: Skinner Sights

Re: Skinner Sights

Re: Skinner Sights

Re: Skinner Sights