Site seems to be OK. Load issue should be resolved now.
Alliant Powders @ Midsouth
Alliant Powders @ Midsouth
Free Hazmat on Alliant Powder orders of $125+ at MidSouth Shooters Supply. Pretty extensive selection of 8lb-ers and even quite a few 4 lb, if you wanted to pick and choose.
I'm so new to all this, I'm hesitant to commit to 8 lbs of anything, but I might go cafeteria-style. All I'm working with so far is Unique and H110.
https://www.midsouthshooterssupply.com/ ... iant-8-lbs
I'm so new to all this, I'm hesitant to commit to 8 lbs of anything, but I might go cafeteria-style. All I'm working with so far is Unique and H110.
https://www.midsouthshooterssupply.com/ ... iant-8-lbs
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
- JEBar
- Town Marshal / Deputy Admin
- Posts: 20441
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC

Re: Alliant Powders @ Midsouth
that's good pricing .... $159 for 8 lb of Unique .... when all is said and done at Cabela's 8 lb cost something over $200
Re: Alliant Powders @ Midsouth
With my reloading focused on 357, maybe 45 LC and some 30-30 plinker loads, 8 lbs or Unique might be just the ticket!
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
- Rifletom
- Deputy Marshal
- Posts: 4014
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory

Re: Alliant Powders @ Midsouth
Evan, do you load for .38 spl? Unique would be excellent for .38 spl, .357, and .45 Colt. Not sure about 30-30 tho.
Already loaded up some 200gr rnfp and 250gr rnfp and Unique for my .45 Colt.
Already loaded up some 200gr rnfp and 250gr rnfp and Unique for my .45 Colt.
- Shakey Jake
- Drover
- Posts: 4351
- Joined: Wed Aug 16, 2017 11:10 am
- Location: Sugar Land, TX
- Contact:

Re: Alliant Powders @ Midsouth
Got their email this morning. Thinking about ordering some primers along with the powder as long there's free hazmat.
Re: Alliant Powders @ Midsouth
No, Tom, just 357 through the BBS, and MrEd has given me some good guidance on Unique for 30-30. What brand boolits are you using for your 45LC?Rifletom wrote:Evan, do you load for .38 spl? Unique would be excellent for .38 spl, .357, and .45 Colt. Not sure about 30-30 tho.
Already loaded up some 200gr rnfp and 250gr rnfp and Unique for my .45 Colt.
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
Re: Alliant Powders @ Midsouth
Good call, Jake. Will add some to my list as well...Shakey Jake wrote:Got their email this morning. Thinking about ordering some primers along with the powder as long there's free hazmat.
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
-
Mistered
Re: Alliant Powders @ Midsouth
I too would not normally commit to any large quantity of one powder but due to previous 'events' the shelves in my local stores were nearly bare but one day an 8 lb. jug of Unique came in to one of them and I scored it - as well as laying in a heavy supply of other components for the potential of shortages continuing.
Well that all came to pass but no matter as most of what I am shooting regularly all load well with Unique so I'm pretty well fixed with powder for a while.
Well that all came to pass but no matter as most of what I am shooting regularly all load well with Unique so I'm pretty well fixed with powder for a while.
Last edited by Mistered on Mon Jan 14, 2019 10:38 pm, edited 3 times in total.
-
Mistered
Re: Alliant Powders @ Midsouth
Unique has had quite a 'history' for being used to load reduced rounds not only in 30-30 but other cartridges as well.Not sure about 30-30 tho.
I have previously mentioned using 12 grains of Unique with the Speer 100 grain Plinker bullets in 30-30 with excellent results. Low report and recoil but still clocking at about 1700 FPS at the muzzle and the accuracy is excellent.
- Rifletom
- Deputy Marshal
- Posts: 4014
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory

Re: Alliant Powders @ Midsouth
I'm using Missouri bullets; 250gr LRNFP, .452", Brinell hardness 12.ESquared wrote:No, Tom, just 357 through the BBS, and MrEd has given me some good guidance on Unique for 30-30. What brand boolits are you using for your 45LC?Rifletom wrote:Evan, do you load for .38 spl? Unique would be excellent for .38 spl, .357, and .45 Colt. Not sure about 30-30 tho.
Already loaded up some 200gr rnfp and 250gr rnfp and Unique for my .45 Colt.
Mistered, that looks to be a good load with the Unique/100gr bullets in the 30-30. Excellent plinker load.
Re: Alliant Powders @ Midsouth
Unique is good powder for light recoil 45-70 loads I shoot out of my Trapdoor.
Be thankful we are not getting all the government we are paying for. - Will Rogers
Re: Alliant Powders @ Midsouth
Looks like this one:
http://missouribullet.com/details.php?p ... condary=14
Been wondering about the whole .452" vs. .451" diameter issue. Thanks for the tip! I may have a line on a good source for range brass in 45 Colt. Waiting for clarification on quantity/quality/cost.
http://missouribullet.com/details.php?p ... condary=14
Been wondering about the whole .452" vs. .451" diameter issue. Thanks for the tip! I may have a line on a good source for range brass in 45 Colt. Waiting for clarification on quantity/quality/cost.
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
- Rifletom
- Deputy Marshal
- Posts: 4014
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory

Re: Alliant Powders @ Midsouth
Yeah, .452" is what you'd want. Mine are the 250gr. In the "Reloading" section, I'm asking about Brinell 12 hardness in .45 Colt rifle barrels. Want to make sure I'm doing this right.