Magazine tube

Post by **GFK** » Mon Dec 17, 2018 5:26 pm

Rifletom wrote:Ever since I bought my BB Brass in .357, I've had a dickens of a time getting the plunger tube to open and close on that small notch to secure during firing. Is there a simple "fix" for this?

Glad you got a new tube. By chance, have you tried cleaning and lightly oiling the inside of the outer tube? I also wipe my inner tube with a silicone rag.

Post by **Rifletom** » Mon Dec 17, 2018 6:45 pm

GFK wrote:
Rifletom wrote:Ever since I bought my BB Brass in .357, I've had a dickens of a time getting the plunger tube to open and close on that small notch to secure during firing. Is there a simple "fix" for this?
Glad you got a new tube. By chance, have you tried cleaning and lightly oiling the inside of the outer tube? I also wipe my inner tube with a silicone rag.

Thanks GFK. I have cleaned and oiled[Rem-Oil], did not change. Even changed to a thinner o-ring. Nada. I will keep working with it tho. Just looking at them, I can not tell any difference. Fixed now tho.

Post by **GFK** » Mon Dec 17, 2018 7:43 pm

Rifletom wrote:Just looking at them, I can not tell any difference. Fixed now tho.

Hum. Interesting. Thanks.

Post by **Rifletom** » Mon Dec 17, 2018 10:35 pm

When I mentioned "fixed now tho", I'm meaning the new tube fixed my issue. The original tube is still very tight, stiff, difficult. Wasn't working correctly. Henry took care of that.

Post by **Mags** » Mon Dec 17, 2018 11:18 pm

.
What happens when you swap o-rings between tubes?

Rifletom wrote:When I mentioned "fixed now tho", I'm meaning the new tube fixed my issue. The original tube is still very tight, stiff, difficult. Wasn't working correctly. Henry took care of that.

Post by **Rifletom** » Tue Dec 18, 2018 8:19 am

Haven't done that as yet. I'll try that later today.

Henry Rifle Forums

Magazine tube

Re: Magazine tube

Re: Magazine tube

Re: Magazine tube

Re: Magazine tube

Re: Magazine tube

Re: Magazine tube