Henry's new .410 Lever Shotgun!

[Ferguson-Outfitters]

If recoil, cost, or effeciency of shot is a concern, the ONLY logical answer is a 20 gauge.

After looking at PT's sight rig on the rail, I'm likely to rig up a cheap 870 express with ghost.

[Catherine]

Excellent workmanship, sights on out of the box, sluggers hit a little lower than POA at 25 yards, buckshot and #6 right on bullseye at 15 yards. I5 yards gave me very tight pattern for birdshot and 000, I didn't try them from 25 yards.

Workmanship for S/N sixty-something is impeccable.

If you have a use for such a gun like I do, thumbs up.

Beautiful shotgun! Congrats!

I will have to see if any of our Western Montana stores have any in stock to see and hold.

Thank you for sharing. Good shooting to you!

Cate

[Ferguson-Outfitters]

Deleted

[huntlee]

Have not received my 410 lever yet. My LGS dropped the ball. Going with another LGS! Now I must wait! Nice Lady at Henry said that if My LGS could not get this to me, she would have one shipped out to the dealer of my choice! This process can take several weeks and sometimes cost a bit more depending on the LGS. Have also ordered the BBS in 327!

[CT_Shooter]

Good luck, huntlee. I hope both arrive quickly. It's a shame when expectations aren't met. I know you're disappointed, but you'll be smiling when you look down the barrels and pull those triggers.

[Catherine]

We have only checked three stores out here and so far no one has a HENRY shotgun in stock.

I may call around some more later on this coming week.

I wanted to see the lever shotgun first and, later on, the single shot shotgun when it comes out.

I am interested in the single shot .410 shotgun.

https://www.henryusa.com/shotgun/single-shot-shotgun/

Steel Shotgun – Ships May, 2017
Brass Shotgun – Ships July, 2017

Cate

[Ferguson-Outfitters]

I'm gonna get that brass 20 gauge.

[Ferguson-Outfitters]

Deleted

[daytime dave]

Nice reports Mr. Ferguson. I'm glad the .410 lever has a decent chance on the squirrels. Nice photograph of yours too.

[Ferguson-Outfitters]

Thankee

Man if they woulda choked this down just a bit, maybe even modified or improved cyl?

[Stuffer]

I was considering one of these but ran into one big problem. The gun holds five rounds. Calif. Hunting regulations, even for small game limits the capacity to 3 rounds. If a plug is used it must be removable only if the gun has to be diss-assembled in order to do so.(Same as waterfowl regulations). Any thoughts? Am I missing something other than escaping from California?

[JEBar]

if you contact Henry you will find they can make custom magazine tubes to accommodate such laws .... don't know about the disassembly part but do know you can't take a rod apart without a good bit of effort

[Jdl447]

Pretty much all pump or semi auto shotguns come from the factory with a magazine plug for water fowl hunting. Mossberg just uses a wood dowl with on O ring, Remington's are plastic.
I'm sure Henry has a solution.

[Ferguson-Outfitters]

Deleted

[Stuffer]

I contacted Henry Arms about the magazine capacity problem when using the gun to hunt in Calif. And was told that while they were aware of the problem in some areas they did not have a solution yet but we're working on it already. They answered my e- mail within 24 hrs. Great customer service. I guess that gives me time to start saving for it or maybe look at that single shot 20 guage instead. So many problems to solve. Oh we'll, I get to pick up my new Long Ranger AND my new frontier 22 Magnum at the gun shop tomorrow, guess they will keep me occupied for a while.

[Ferguson-Outfitters]

Heres another review, I believe sugar coated.

https://www.americanrifleman.org/articl ... -410-bore/

[JBlaisdell]

Simple solution is to offer the gun with a shorter magazine that can only hold 3 rounds. Or a tube permanently modified for 3, and marked on the end cap with the capacity.

[JEBar]

Heres another review, I believe sugar coated.

https://www.americanrifleman.org/articl ... -410-bore/

I found the following quote from the link above to be very interesting :

"The close dimensional similarities of the venerable .45-70 Gov't. straight-walled rifle cartridge to the slightly smaller modern 2½" long .410 bore shotgun shell allowed Henry's designers to simply borrow most of the Rare Carbine's components directly from the company's .45-70 Gov't. rifle. This is good news for .410 fans. I've spent some quality time running the .45-70 Gov't. model and it can really take a pounding. Firing the much softer-shooting .410 bore from a .45-70 receiver means this lever gun is over built in the best sense and will provide a lifetime (if not longer) of enjoyable trigger time."

over built indeed ..

[Vaejovis carolinanus]

I took my new 24 inch HO18 yesterday and I am tickled to get it home. I can not wait to shoot this beauty.

[SingleAction357]

They really ought to do something similar to a Mossberg Shockwave with these .410 lever guns. A 26.5 inch non nfa .410 would be pretty nifty don't ya think?