What did you do at your reloading bench today?

[Grunt67]

I haven't done anything @ the bench since I stuff the gut.
But I did order some 9mm bullets tonight because of a nice heads up...but that was from the recliner.
thank ya, Grunt.

RP

My pleasure. Glad it helped.

[Vaquero]

I haven't done anything @ the bench since I stuff the gut.
But I did order some 9mm bullets tonight because of a nice heads up...but that was from the recliner.
thank ya, Grunt.

RP

My pleasure. Glad it helped.666666666666

I really don't shoot that much 9, and I have a fair amount of factory stuff.
But with the current uncertain times, and I didn't really have that many bullets for loading.
That's what it's about though jus because you don't need it, a heads up to others.


RP

[Hatchdog]

Hatch, after you get it set up & going, how long does it take to do each drop. Just curious. ( like the cat ).

It varies a bit. From 10 seconds up to 30 but mostly on the short time end of the spread. I think that when it takes longer to dispense it’s because the scale has to re-zero itself before it starts the next load. I’ll pay more attention next time I use it to see if that’s the case. I found that while dispensing I was able to multi-task by doing other simple tasks while the powder dispensed. With the beep tone I knew when it was time to pour the charge. I felt a little weird doing this while charging cases as usually this process is so manual that it gets 100% attention. I did confirm every charge weight when returning to the scale prior to filling the case.

Also, I was loading .223 with 25 ish grains so the dispense was quicker than say a load for a 45/70 would be. I played with it at 45 grains and the difference was noticeable.

[Grunt67]

Hatch, after you get it set up & going, how long does it take to do each drop. Just curious. ( like the cat ).

It varies a bit. From 10 seconds up to 30 but mostly on the short time end of the spread. I think that when it takes longer to dispense it’s because the scale has to re-zero itself before it starts the next load. I’ll pay more attention next time I use it to see if that’s the case. I found that while dispensing I was able to multi-task by doing other simple tasks while the powder dispensed. With the beep tone I knew when it was time to pour the charge. I felt a little weird doing this while charging cases as usually this process is so manual that it gets 100% attention. I did confirm every charge weight when returning to the scale prior to filling the case.

Also, I was loading .223 with 25 ish grains so the dispense was quicker than say a load for a 45/70 would be. I played with it at 45 grains and the difference was noticeable.

Thanks, Hatch. Appreciate the report.

[Vaquero]

This morning I saw an old friend and he says I have something you might can use. He knows I reload, said he bought these thinking he was getting some 209's for his muzzle loader. Wanted to know if I could use 'em? I said heck yeah, he just gave them to me didn't want any money.
They're magnums but heck free is free.

20210226_123856.jpg (270.59 KiB) Viewed 1249 times

RP

[Grunt67]

Hey, now you've got an excuse to go buy you a magnum.
Luck like that just rolls right off my back.

[Vaquero]

Hey, now you've got an excuse to go buy you a magnum.
Luck like that just rolls right off my back.

Naw, naw, just gives ya an excuse to play.
They can be used in reg. rifle, just need to back off on the powder a hair.
There for comes the playing/load testing.
Might play with the 308 MX , or
the 444.

RP

[Vaquero]

Sometime back one of y'all posted the pic of the whiskey bottle with empty brass.
Well about loaded 45's in a 46.

20210227_090057.jpg (163.6 KiB) Viewed 1263 times

RP

[Oldbrass]

First time loading cast in 45acp Going to use unique and see how they work in the 1911

[Rifletom]

First time loading cast in 45acp Going to use unique and see how they work in the 1911

Will work just fine. About 6.0gr ought to work. 230gr RN?