Site seems to be OK. Load issue should be resolved now.

Anybody want this brass

All things reloading here
Post Reply
Oldbrass
Cowboy
Posts: 1018
Joined: Mon Sep 07, 2020 9:53 pm
Location: Central South Carolina
United States of America

Anybody want this brass

Post by Oldbrass » Fri Jan 15, 2021 11:03 pm

Mixed bag 300 win mag..300 rem ultra mag.. 338 rem ultra mag. didn't count it you take all. Pay shipping usps. Nobody I know uses it. Cleaning gun room going in trash on Monday
Attachments
IMG_20210115_195523793.jpg
IMG_20210115_195523793.jpg (203.42 KiB) Viewed 1975 times
IMG_20210115_194322868.jpg
IMG_20210115_194322868.jpg (170.47 KiB) Viewed 1975 times
30-30, Helping bad fisherman eat since 1895

User avatar
Grunt67
Cowboy
Posts: 1879
Joined: Tue Jan 28, 2020 10:57 am
Location: Hartsville,TN
United States of America

Re: Anybody want this brass

Post by Grunt67 » Fri Jan 15, 2021 11:23 pm

You could sell it if there's enough to fool with.
I rarely ever buy a rifle, but when I do, it's a Henry.

"Every day above ground, is a good day" ( Al Capone )

Oldbrass
Cowboy
Posts: 1018
Joined: Mon Sep 07, 2020 9:53 pm
Location: Central South Carolina
United States of America

Re: Anybody want this brass

Post by Oldbrass » Fri Jan 15, 2021 11:32 pm

Grunt67 wrote: ↑
Fri Jan 15, 2021 11:23 pm
You could sell it if there's enough to fool with.
There's plenty and I could. just want it gone
30-30, Helping bad fisherman eat since 1895

User avatar
Grunt67
Cowboy
Posts: 1879
Joined: Tue Jan 28, 2020 10:57 am
Location: Hartsville,TN
United States of America

Re: Anybody want this brass

Post by Grunt67 » Sat Jan 16, 2021 12:03 am

I don't have any of those cal. Maybe someone will. Brass is scarce like everything else these days.
I rarely ever buy a rifle, but when I do, it's a Henry.

"Every day above ground, is a good day" ( Al Capone )

John E Davies
Cattle Driver
Posts: 885
Joined: Sun Dec 11, 2016 10:48 pm
Location: Spokane WA
United States of America

Re: Anybody want this brass

Post by John E Davies » Sat Jan 16, 2021 12:17 pm

DON'T toss it, take it to a recycle center and they will pay scrap value for it. Probably about $1.25 per pound. Not a whole lot, but if there is a location nearby, it is worth dropping by. It Saves The Planet too.If you want to test the waters before selling on Gun Broker, list it here and you may find a buyer. You will need to register (free), and look at the Read Me post at the top, first..

https://www.spokaneguntrader.com/viewforum.php?f=10

You do need to count the brass, or at least weigh it so a buyer would have a clue how many are there..... that brass is about 29 count per pound. https://www.armorally.com/brass-counts-by-weight/. And the retail price for once fired is about $0.50 EACH. You have a lot of cash sitting there my friend. Maybe $150, my guess. Weigh it to find out. If you listed it by caliber for $0.30 each, somebody will snap it up.

John Davies
Spokane WA
Last edited by John E Davies on Sat Jan 16, 2021 12:49 pm, edited 1 time in total.

Oldbrass
Cowboy
Posts: 1018
Joined: Mon Sep 07, 2020 9:53 pm
Location: Central South Carolina
United States of America

Re: Anybody want this brass

Post by Oldbrass » Sat Jan 16, 2021 12:46 pm

Alrighty then, I'll sort thru it. If I get bored wearing this neck brace maybe I'll even tumble it
30-30, Helping bad fisherman eat since 1895

User avatar
beaverislander
Cowhand
Posts: 197
Joined: Fri Dec 04, 2020 7:58 pm
United States of America

Re: Anybody want this brass

Post by beaverislander » Sat Jan 16, 2021 1:32 pm

Oldbrass,
I will take it. I'll PM you my address and let me know what shipping will be, I'll send you a check if thats OK.

Oldbrass
Cowboy
Posts: 1018
Joined: Mon Sep 07, 2020 9:53 pm
Location: Central South Carolina
United States of America

Re: Anybody want this brass

Post by Oldbrass » Sat Jan 16, 2021 2:34 pm

beaverislander wrote: ↑
Sat Jan 16, 2021 1:32 pm
Oldbrass,
I will take it. I'll PM you my address and let me know what shipping will be, I'll send you a check if thats OK.
Perfect Thankyou, pay shipping after it arrives
30-30, Helping bad fisherman eat since 1895

User avatar
beaverislander
Cowhand
Posts: 197
Joined: Fri Dec 04, 2020 7:58 pm
United States of America

Re: Anybody want this brass

Post by beaverislander » Sat Jan 16, 2021 5:42 pm

10-4, and I thank you.

Oldbrass
Cowboy
Posts: 1018
Joined: Mon Sep 07, 2020 9:53 pm
Location: Central South Carolina
United States of America

Re: Anybody want this brass

Post by Oldbrass » Sat Jan 16, 2021 10:27 pm

Got your address I'll mail it out Monday
30-30, Helping bad fisherman eat since 1895

User avatar
Rifletom
Deputy Marshal
Posts: 4014
Joined: Tue Aug 21, 2018 11:26 pm
Location: California Territory
United States of America

Re: Anybody want this brass

Post by Rifletom » Sun Jan 17, 2021 11:38 am

Way to go guys, both parties win.

John E Davies
Cattle Driver
Posts: 885
Joined: Sun Dec 11, 2016 10:48 pm
Location: Spokane WA
United States of America

Re: Anybody want this brass

Post by John E Davies » Sun Jan 17, 2021 12:40 pm

Rifletom wrote: ↑
Sun Jan 17, 2021 11:38 am
Way to go guys, both parties win.
Well, one side sure did win, I am not so sure about the other..... but sometimes you just want stuff gone, and not have to deal with selling it. Does anybody have any .44 Mag or .327 Federal Mag brass or bullets they want to give me? I will pay shipping. 😬

John Davies
Spokane WA

Oldbrass
Cowboy
Posts: 1018
Joined: Mon Sep 07, 2020 9:53 pm
Location: Central South Carolina
United States of America

Re: Anybody want this brass

Post by Oldbrass » Sun Jan 17, 2021 4:13 pm

Both parties won πŸ˜‚ the story on the brass: co-worker asked if I would load this for him, I agreed on condition they supply dies, bullets,primer,powder . Well now a year later they've moved on and don't want the brass. I'm happy knowing someone can use it and I'm out nothing..
30-30, Helping bad fisherman eat since 1895

Oldbrass
Cowboy
Posts: 1018
Joined: Mon Sep 07, 2020 9:53 pm
Location: Central South Carolina
United States of America

Re: Anybody want this brass

Post by Oldbrass » Sun Jan 17, 2021 4:25 pm

John E Davies wrote: ↑
Sun Jan 17, 2021 12:40 pm
Rifletom wrote: ↑
Sun Jan 17, 2021 11:38 am
Way to go guys, both parties win.
Well, one side sure did win, I am not so sure about the other..... but sometimes you just want stuff gone, and not have to deal with selling it. Does anybody have any .44 Mag or .327 Federal Mag brass or bullets they want to give me? I will pay shipping. 😬

John Davies
Spokane WA
John same story on these 108 pieces 44 magnum brass. About half went thru the tumbler and deprimed. Shipping would be $8.05Β’ .if you want it PM . I don't have and never will have a 44 mag.
Attachments
IMG_20210117_131734516.jpg
IMG_20210117_131734516.jpg (139.38 KiB) Viewed 1289 times
30-30, Helping bad fisherman eat since 1895

John E Davies
Cattle Driver
Posts: 885
Joined: Sun Dec 11, 2016 10:48 pm
Location: Spokane WA
United States of America

Re: Anybody want this brass

Post by John E Davies » Sun Jan 17, 2021 7:39 pm

Oldbrass wrote: ↑
Sun Jan 17, 2021 4:25 pm
John same story on these 108 pieces 44 magnum brass. About half went thru the tumbler and deprimed. Shipping would be $8.05Β’ .if you want it PM . I don't have and never will have a 44 mag.
LOL, thanks, that is a most gracious offer. I respectfully decline; my comment was meant to be humor. I am not that hard up, please offer it to another member who might need it more.

You seem to be just the kind of neighbor I wish I had. Thanks for doing this.

John Davies
Spokane WA

Monkeymaster
Tenderfoot
Posts: 4
Joined: Sun Jan 10, 2021 8:35 am
United States of America

Re: Anybody want this brass

Post by Monkeymaster » Sun Feb 14, 2021 9:39 am

Good job guys
Nice to see folks being friendly and honest.

God bless America, she needs it.
Let him grow, Shoot a doe !

Post Reply