I mean I had no choice.
Upon unboxing I found it had poor wood fit on the buttstock (and mean WORSE than the current at the time Remlin garbage wood fit) and a the worst trigger pull of ANY lever action I ever felt .
O well I had a 327 .
I guessed I could live with the wood fit and the trigger would smooth out with use .
Well the trigger never got better and in fact you could see it pulling the hammer back as you pull the trigger . Number of pounds ? Who knows , off the scale of the pull gauge I borrowed. I dove in , polished a few things but did not change any angles or cut any springs. It got marginally better but still not right.
I decided to whine and sent it in. As a by the way , while it's there thought I mentioned the atrocious wood fit .
When it returned I found they had replaced all the parts I polished with new and the trigger pull was back to square one ,,,,unmeasurable ,,, awful.
The butt stock was replaced with shiny new ,,, but fit just as poorly as the first. I also have a 357 rifle so I swapped buttstocks. The new stock fit the 357 perfectly and the 357 stock was awful on the 327. Seems the receiver is too wide on the 327 ?????
I gave up , repolished the internals and let it go.
Fast forward to finding a 327 carbine recently on a used rifle rack ,,,,and O Boy I wanted a carbine.
Guess what SAME CRAPPY TRIGGER, SAME CRAPPY WOODFIT in the same place.
I bought it anyway cuz ,,,,, O Boy I want a carbine.
On the rack next to it was a 44 big boy and a 357 big boy ,,,,, both just right. Smooth and well fit.
Long story short ,,, You guys that have 327s are you seeing the same thing ? Is this a 327 thing ,,, or am I just lucky ?
