Site seems to be OK. Load issue should be resolved now.

Rebuilding our airgun range

All things air related here. BB guns, pellet guns, paintball guns, even air shotguns.
Post Reply
User avatar
North Country Gal
Firearms Advisor
Posts: 6823
Joined: Thu Apr 07, 2016 12:46 pm
Location: northern Wisconsin
United States of America

Rebuilding our airgun range

Post by North Country Gal » Sun Aug 02, 2020 7:21 pm

Our airgun range for the last few years has been basically an add this and add that kind of thing, just making do with scrap materials on hand to form a backstop. We decided to a total overhaul and rebuild, this week, for the sake of safety and looks.

First we built (or I should say my husband built and I helped) the backstop basic structure. It's angled for the sake of deflecting pellets and made of 2x8 treated lumber, treated lumber being a necessity in our northern climate.

Image

At 30 yards, shooting our most powerful air rifle, pellets will leave a shallow impression in the soft treated pine. It would take many, many years for the damage to to seriously deface the soft pine, but we decided to face it 3/8" plywood which is harder and can be replaced as needed.

Image

And the finished product makes for a target rich environment, my favorite way to shoot airguns, punching paper and, our favorite, shooting steel. Rifles are shot at a measured 30 yards and handguns at 10 to 15 yards. No problem at the shorter distances with the air pistols, since they are lower powered than the rifles.

Image

User avatar
Ernie
Drover
Posts: 2566
Joined: Thu Mar 07, 2019 8:07 pm
Location: Southwestern Lower Michigan
United States of America

Re: Rebuilding our airgun range

Post by Ernie » Sun Aug 02, 2020 7:25 pm

Sure plenty to shoot at, have fun.

User avatar
markiver54
Deputy Marshal
Posts: 11149
Joined: Sun Nov 04, 2018 11:49 am
Location: Biue Ridge Mountains, NC
United States of America

Re: Rebuilding our airgun range

Post by markiver54 » Sun Aug 02, 2020 7:39 pm

Looks great NCG!
Might have to do something very similar at the cabin! 👍👍
I'm your Huckleberry

User avatar
RanchRoper
Forum Ambassador
Posts: 12964
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Re: Rebuilding our airgun range

Post by RanchRoper » Sun Aug 02, 2020 8:02 pm

That looks great.

Kibler Colonial Flintlock .50

Ohkínohkomit - Shoot skillfully

User avatar
GFK
Drover
Posts: 2328
Joined: Tue Oct 17, 2017 12:56 pm
Location: SE
United States of America

Re: Rebuilding our airgun range

Post by GFK » Sun Aug 02, 2020 9:20 pm

That is nice! Looks pretty professional. The yard looks nice also.
Actions speak louder than words (Matthew 21:28-31).

User avatar
BigAl52
Forum Ambassador
Posts: 15048
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Rebuilding our airgun range

Post by BigAl52 » Sun Aug 02, 2020 11:24 pm

Looks like theres a Tennis ball and some golf balls there. I have the same thing coming to my range soon
Don't let the old man in


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
BigAl52
Forum Ambassador
Posts: 15048
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Rebuilding our airgun range

Post by BigAl52 » Sun Aug 02, 2020 11:26 pm

NCG whos animal trap is that there on the right
Don't let the old man in


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
Sir Henry
Administrator / Owner
Posts: 14752
Joined: Sun Mar 20, 2016 10:58 pm
Location: Price County Wisconsin
United States of America

Re: Rebuilding our airgun range

Post by Sir Henry » Sun Aug 02, 2020 11:54 pm

That looks great!
Hi, my name is Gene and I'm a Henryholic from Wisconsin.

Range Reporter: Henry Repeater

User avatar
North Country Gal
Firearms Advisor
Posts: 6823
Joined: Thu Apr 07, 2016 12:46 pm
Location: northern Wisconsin
United States of America

Re: Rebuilding our airgun range

Post by North Country Gal » Mon Aug 03, 2020 11:23 am

Thanks, guys. This virus thing has us a bit squeamish about driving to our club range to shoot the powder burners, since we never know who will show up or or crowded it will be, plus the number of cases in our area is spiking strongly, since this is our tourist season and there's more people in the area. We're both in that risky old folks age group, so we're being cautious and mostly staying home to shoot the air guns.

By the way, if you're not following the air gun scene, air guns are having a huge run on availability of both guns and ammo, every bit as bad as regular guns, since a lot of folks have been staying home to shoot during the pandemic, just like us, and, of course, the pandemic has disrupted production and supply, same as with regular guns. On the other hand, the pandemic has pushed a lot of shooters into discovering or re-discovering the tremendous advantage of being able to shoot air guns at home, even if it's just with that old BB gun.

Al, we got that resettable animal trap from pyramidair, several years back. It'd the Air Venturi Stampede https://www.pyramydair.com/s/a/Air_Vent ... _Trap/5778 . It's a tricky one to shoot, since those buffalo are built to swivel a bit, meaning you have to have direct hit in the kill zone to put one down. A hit anywhere else just causes the buf to wobble.

All our reactive metal targets are shoot to reset, so we can just shoot from the bench all afternoon long. At 30 yards, shooting offhand, getting a straight run on any of these reactive targets is quite a challenge. Even shooting from a rest at 30 yards, putting all those buffalo targets down 4 in a row is not easy. I'd say 90%of our shooting outdoors with our airguns is shooting steel, these days. Much more fun than shooting paper.

User avatar
BigAl52
Forum Ambassador
Posts: 15048
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Rebuilding our airgun range

Post by BigAl52 » Mon Aug 03, 2020 2:00 pm

Thanks NCG. Im gonna get one of those. There out of stock now but I will order one for the future.
Don't let the old man in


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
fortyshooter
Ranch Foreman
Posts: 7103
Joined: Sat Dec 09, 2017 10:37 am
Location: Va.
United States of America

Re: Rebuilding our airgun range

Post by fortyshooter » Mon Aug 03, 2020 7:20 pm

Very nice new target setup you have NCG ! That backstop should last you a long time and the plywood is a great idea to cover the gaps
between the 2X8's as they shrink due to drying out.

User avatar
North Country Gal
Firearms Advisor
Posts: 6823
Joined: Thu Apr 07, 2016 12:46 pm
Location: northern Wisconsin
United States of America

Re: Rebuilding our airgun range

Post by North Country Gal » Mon Aug 03, 2020 8:42 pm

Thanks, forty. It's been very windy the last few days, so hoping the wind dies down to get out and try our new setup.

Team Roper

Re: Rebuilding our airgun range

Post by Team Roper » Tue Aug 11, 2020 5:34 am

That is a very nice set-up. Nice work.

User avatar
North Country Gal
Firearms Advisor
Posts: 6823
Joined: Thu Apr 07, 2016 12:46 pm
Location: northern Wisconsin
United States of America

Re: Rebuilding our airgun range

Post by North Country Gal » Tue Aug 11, 2020 10:58 am

Thank you, Roper.

Forty, there won't be much shrinkage on the 2x 8s, because we use treated lumber for all our outdoor projects. Without that treatment in our cool, damp northern climate, woods rots fairly quick and/or gets covered with moss. Speaking of moss, hubby just got done cleaning the moss of the roof of the garage. Something we have do every now and then.

We have been shooting with our new setup and it works great. Lots of fun, all the more so for being able to do it in our backyard. Just grab an air rifle and walk out the door.

Of course, being able to stay home and shoot has been one of the reasons there has been a big run on airguns and pellets during this pandemic. Not the only reason sales are up and supply is down, but it's one of them.

Post Reply