What did you do at your reloading bench today?

[BigAl52]

If you have some 2400 stick about 14 grain under those XTP bullets. How much HS-6 are you using in the Colt . Ive tried that and had good luck with HS-6.

[runnin n gunnin]

Hey Big Al, I dropped 11.5 grn under a 200 grn XTP. I have used 2500 and like it, but I am down to 1 pound and can't find any right now. I have 4 pounds of HS-6 and thought I would give it a try. I am looking for around 800 to 850 FPS on the Chrono.

[RanchRoper]

Love that knife and sheath. Who made it?

[runnin n gunnin]

Thanks RR, coming from a true mountain man, I appreciate it.

I do not know who made it. My son had it made for me and gave it to me for Fathers Day ten years ago, so it is special to me and I always wear it on my cartridge belt.

On a side note, I have one that looks similar I keep in the safe that my father made in the boondocks of Elmendorf Texas when he was 16 around 1924. He killed the deer and used the antler for the Handle.

[Shakey Jake]

The LGS was out of the Hornady .452 250 gr XTP's for the long colt loads. I ordered two boxes online so I'll get to those when they come in. Finished loading some Sierra 140 gr HP's over 12.8 gr of Accurate #9 for the .357 yesterday. I really like that load. It shoots well in the Vaquero. I'm going to load some more .32 S&W longs today for the 31-1, LCR, and Single Seven. They make a nice plinking load.
Jake

[Grunt67]

Last nite, started reloading some 9mm, with Hornady XTP 124 gr
JHP, CFE Pistol, 5.2 grs.

[runnin n gunnin]

RR - Here are the two knives we were talking about. The top one is the one I carry on my cartridge belt my son gave me, and the one below it is the one my father made coming on 96 years ago 9his initials are carved in the handle).

20200524_090705.jpg (203.48 KiB) Viewed 3257 times

[BigAl52]

Hey Big Al, I dropped 11.5 grn under a 200 grn XTP. I have used 2500 and like it, but I am down to 1 pound and can't find any right now. I have 4 pounds of HS-6 and thought I would give it a try. I am looking for around 800 to 850 FPS on the Chrono.

These guys have some 2400 R N G
https://reloadingunlimited.com/product/alliant-2400/

[CT_Shooter]

Thanks for the link, Al. I've never used 2400, but since so many members like it (a lot), I checked it out. With shipping and the HazMat fee, the cost for a four pound container is about $38 per pound. Too much. I'll look for it locally once I can and do get back to shooting again.

These guys have some 2400 R N G
https://reloadingunlimited.com/product/alliant-2400/

[BigAl52]

I looked around there CT and tried to find the shipping and Haz Fee but I didnt actually add anything to a cart. Thats probably why they still have some. Agreed thats a little on the gouging side.

[BigAl52]

Thanks for the link, Al. I've never used 2400, but since so many members like it (a lot), I checked it out. With shipping and the HazMat fee, the cost for a four pound container is about $38 per pound. Too much. I'll look for it locally once I can and do get back to shooting again.

These guys have some 2400 R N G
https://reloadingunlimited.com/product/alliant-2400/

Ok I checked this one out and I have ordered from these guys before there good people. These guys have 4lbers at 27.11 with ship and hazmat
https://www.grafs.com/retail/catalog/pr ... uctId/5495

[JEBar]

spent some time organizing and packing our portable loading equipment and supplies for our summer trip out west .... everything but the powder is pretty well packed .... to maintain a steady temp, we won't pack it until just before we pull out

[Rifletom]

Just finished loading 200 rounds .357 in 110 grain and 158 Grain Hornady XTP. They are broken up into 6 sets. Half are 110 are over Bullseye, the other half over Unique, same thing with the 158s. I want to Chrono different loads in the blackhawk and El Patron and Henry.


20200523_092829.jpg


I then loaded up come 45 Colts. I did rounds for the pistols (Blackhawk and single six) 200 grain XTPs half with Bullseye, the other half with HS-6.

Also loaded two different loads for the Henry with HS-6 using 250grn MB Cowboy #

20200523_123320.jpg

Ahh, I spied that rifle round in the gun belt. Viva The Duke! Nice touch.

.45s on the top and .357's on the bottom.

Next off the the range !

[Rifletom]

Don't know why my response went in the middle of r-n-g's comment, but, it's in there.

[runnin n gunnin]

Great observation RT, 45-70 round in honor of a true American Patriot !

[BigAl52]

Ordered some 200 grain and 210 grain 45 Colt bullets to give them a try in my 45 colt guns.

[RanchRoper]

I really like 200 gr lead and 7.0 gn of Universal. That might be my favorite target ammo in both pistol and rifle.

[runnin n gunnin]

RR - great new pict !

[RanchRoper]

Haha, it was time for a spring one.

[runnin n gunnin]

Very classic RR, it reflects the spirit of the west ! (and north)