Site seems to be working OK.
Brass catcher for lever rifles?
- fortyshooter
- Ranch Foreman
- Posts: 7082
- Joined: Sat Dec 09, 2017 10:37 am
- Location: Va.

Brass catcher for lever rifles?
I want a bit of freedom to enjoy my lever rifle without having to keep an eye on where my brass is falling.
Yes a tarp can work if you stay within it's confines and you weigh down the edges so the wind don't carry it away and have done that.
So for a huge investment of 12 bucks I ordered up a Caldwell catcher that looks to be somewhat universal with a Velcro strap and
wire frame. Got it fitted on my Big Boy .357 and had to bend down the wire at the wrap edge to keep it below my rear sight.
Loaded an empty case into the chamber and it landed in the bag when lever was cycled...promising...and will give it a run next time at the range.
Yes a tarp can work if you stay within it's confines and you weigh down the edges so the wind don't carry it away and have done that.
So for a huge investment of 12 bucks I ordered up a Caldwell catcher that looks to be somewhat universal with a Velcro strap and
wire frame. Got it fitted on my Big Boy .357 and had to bend down the wire at the wrap edge to keep it below my rear sight.
Loaded an empty case into the chamber and it landed in the bag when lever was cycled...promising...and will give it a run next time at the range.
You do not have the required permissions to view the files attached to this post.
Re: Brass catcher for lever rifles?
I have that same catcher I use on my AR's-best thing ever to save brass-it gets expensive if your a reloader and lose half your brass every range trip.
That's a good idea-I think I will try that on my Henry's as well
That's a good idea-I think I will try that on my Henry's as well
THE CROW
- RanchRoper
- Forum Ambassador
- Posts: 12953
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta

Re: Brass catcher for lever rifles?
My Henry top ejects and most of them end up on my hat brim... 
Pedersoli Frontier Flintlock .50
Kibler Colonial Flintlock .50
Ohkínohkomit - Shoot skillfully
-
Mistered
Re: Brass catcher for lever rifles?
Ever chased jack rabbits (or any other running game) with ANYTHING that ejects shell cases?
If so forget collecting your brass!
If so forget collecting your brass!
Last edited by Mistered on Mon Feb 24, 2020 8:46 am, edited 1 time in total.
Re: Brass catcher for lever rifles?
Ugly as sin...but, maybe a good idea. I hate chasing brass. Every time I run the action, I am distracted by where is my brass going. Hmmm
Remember, it's not how many guns you have. It's how many bullets you have.
-
John E Davies
- Cattle Driver
- Posts: 885
- Joined: Sun Dec 11, 2016 10:48 pm
- Location: Spokane WA

Re: Brass catcher for lever rifles?
This it? https://www.amazon.com/dp/B004SKCUME/? ... _lig_dp_it
Thanks for the idea. I will be interested to see if it works decently.
John Davies
Spokane WA
Thanks for the idea. I will be interested to see if it works decently.
John Davies
Spokane WA
Re: Brass catcher for lever rifles?
That's using your headRanchRoper wrote: ↑Sun Feb 23, 2020 9:00 pmMy Henry top ejects and most of them end up on my hat brim...![]()
~Пока~
-
Mistered
Re: Brass catcher for lever rifles?
With levers on a bench its not so much a problem.
I typically just slowly eject the fired case, grab it an put it in a bag.
Levers in general are not bad as they dont send brass flying like semi autos.
I typically just slowly eject the fired case, grab it an put it in a bag.
Levers in general are not bad as they dont send brass flying like semi autos.
-
Ojaileveraction
Re: Brass catcher for lever rifles?
The 45-70 cases are like picking up loose 50 cent coins, the 25-20 cases like quarters.
- JEBar
- Town Marshal / Deputy Admin
- Posts: 20413
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC

Re: Brass catcher for lever rifles?
interesting .... I've seen them on AR's and semi automatic shotguns but not on lever actions .... at first look, I tend to believe one wouldn't work on our Henry rifles because of the scopes we've mounted on them
Re: Brass catcher for lever rifles?
.
not to my liking.
not to my liking.
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
Re: Brass catcher for lever rifles?
That's a great idea, forty. Trying to see where your brass lands is a pain, if not impossible. I usually lose a few.
Have to check that out, thanks.
Have to check that out, thanks.
I rarely ever buy a rifle, but when I do, it's a Henry.
"Every day above ground, is a good day" ( Al Capone )
"Every day above ground, is a good day" ( Al Capone )
Re: Brass catcher for lever rifles?
I use to do the same thing Fish. Now I dont care. I bet I dont go shooting enough to lose enough cases that its going to even matter that much. I just have fun and enjoy the time Im getting to shoot. I can buy another bag of brass.
Don't let the old man in
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55