What did you do at your reloading bench today?

Post by **JEBar** » Thu Jan 09, 2020 9:25 pm

we are in Texas but back home 200 Nosler 30 cal 180 gr E-tip (solid copper) bullets from Shooter's Pro Shop arrived at our son's home and have been placed in inventory

Post by **runnin n gunnin** » Thu Jan 09, 2020 9:28 pm

Completed my bench re-design today. I have been a Redding guy for years, family bought me a Hornady AP progressive press for Christmas.
Completely res-designed my bench, used In Line Fabrications stuff (which is GREAT) to organize, and still have the ability to store my Redding press on the side of the bench. (I am using my progressive for 38/357, 45 Colt, .223 and my Redding for 7mm, 308, 45-70) for right now.

Now, nothing left to do by start to dial in the Hornady and install the case feeder and bullet feeder.

: 20191228_181919.jpg (179.68 KiB) Viewed 11275 times

: 20191228_181949.jpg (211.22 KiB) Viewed 11275 times

Post by **Vaquero** » Thu Jan 09, 2020 9:56 pm

Ojaileveraction wrote: ↑
Thu Jan 09, 2020 9:10 pm

That is indeed a good load Randy. Get the Missouri one's in yet? I am sold on those 180's!
I've wondered about those MBC .358 180 Pugnose and Striker for 35rem.

I have shot some 158 gr cast 357's out out 35 Rem don't remember the load.
nice little plinker load.
Really depends on bore size, and bullet size.
But yes 180 gr 35 is still some bad business on the receiving end.

RP

Post by **BigAl52** » Thu Jan 09, 2020 10:06 pm

Local pawn shop has a nice micro groove 35 remington for sale for you 35 lovers

Post by **BigAl52** » Thu Jan 09, 2020 10:09 pm

Rifletom wrote: ↑
Thu Jan 09, 2020 8:05 pm

Vaquero wrote: ↑
Thu Jan 09, 2020 6:43 pm
Al I sized and primed 49 this morning while drinkin coffee.
Just finished loading 25 with 11.5 grs. of 2400 and some more of those 180's.
Taking a break now.

RP
That is indeed a good load Randy. Get the Missouri one's in yet? I am sold on those 180's!

Ill be keeping those 180's around for sure on my shelf. I got the pugnosers. Thanks to Tom

Post by **Vaquero** » Fri Jan 10, 2020 8:13 am

Well I placed an order for the pugnose MB's.

We will see.

RP

Post by **Vaquero** » Fri Jan 10, 2020 8:15 am

Hey Al, what's the price on the 35?
Not that I need a forth.

RP

Post by **BigAl52** » Fri Jan 10, 2020 9:50 am

https://www.armslist.com/posts/11002049 ... ifle----jm Here it is Randy. If you are interested let me know I know a guy who works there and I could put eyes on it for you if you wish.

Ojaileveraction · Post by **Ojaileveraction** » Fri Jan 10, 2020 9:58 am

That receiver sight is worth a quarter of the price of the rifle.

Post by **Shakey Jake** » Fri Jan 10, 2020 10:50 am

No reloading today as I've got plenty of rounds in the closet. I need to get some more .32 S&W longs loaded for the Model 31.

Post by **Vaquero** » Fri Jan 10, 2020 6:06 pm

BigAl52 wrote: ↑
Fri Jan 10, 2020 9:50 am
https://www.armslist.com/posts/11002049 ... ifle----jm Here it is Randy. If you are interested let me know I know a guy who works there and I could put eyes on it for you if you wish.

Definitely not a bad price, good lookin rifle, made in '71.
Al my next rifle will be a 38-55 of some sort.
I have a friend in Texas that has a Marlin Cowboy with a 26" octagon that may come to Tenn. this year.
I think I can get it at a reasonable price, I just need to save a little more.

Then again maybe Henry will build a case hardened version.

RP

Post by **BigAl52** » Fri Jan 10, 2020 6:16 pm

No Problem Randy. I have one of those Marlins in 38-55. I like it a lot. At one time thought about getting another but don't know why I need two of them so just held off. Besides that the price of them now is double what I paid for mine.

TMB · Post by **TMB** » Fri Jan 10, 2020 7:19 pm

An hour and a half in the tumbler with stainless media. Then an hour separating and rinsing.

: Shiny!!; 15787016818913003420400454548354.jpg (255.28 KiB) Viewed 11159 times

Post by **runnin n gunnin** » Fri Jan 10, 2020 10:00 pm

Very nice, nothing looks better than clean brass !

Post by **BigAl52** » Sat Jan 11, 2020 8:13 am

Loaded clean brass looks good to

6MT · Post by **6MT** » Sat Jan 11, 2020 12:28 pm

Finally got my dies and XTP bullets in. Should be able to do some .44mag this weekend!

Post by **Vaquero** » Sat Jan 11, 2020 12:41 pm

I loaded some 45's earlier some 190 gr SWC's and some 200 gr RFN, both with 7.4 grs. of Red dot.
I did make up a couple of the SWC's first just to make sure they were gonna cycle through the Cowboy.
Maybe get to try 'em out tomorrow, coming a flood at the moment.

Guess I'll get back over there and load up some 44's for the BBB.

RP

Post by **BigAl52** » Sat Jan 11, 2020 1:05 pm

Red dot works good in 45 colt for me. Im headed down to make some 357 with whats left of an open box of zero 158 grhp.

Post by **Rifletom** » Sat Jan 11, 2020 1:57 pm

Al, do you have a .45 Colt load using 250gr rnfp and 2400? Thanks.

Post by **Vaquero** » Sat Jan 11, 2020 2:51 pm

Hey Tom, I've never used 2400 in the 45 colt, but my 45 colt (one book) shows 15.4 grs. with a 250 gr.

RP

Henry Rifle Forums

What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?

Re: What did you do at your reloading bench today?