BP Pistol loading stand is built -- MOD ADDED

[PT7]

I posted this a couple of days ago as a DIY woodworking project. http://henryrifleforums.com/viewtopic.php?f=56&t=7309 Here is the finished BP pistol loading stand I just built. Thought this tool would fit okay under forum "Black Powder Guns."
When I went to my first BP range shoot, I had no idea this loading equipment was needed. I'm definitely more prepared for my next range time! ~~~PT7

DSCN3333.JPG (211.71 KiB) Viewed 5065 times

DSCN3336.JPG (199.74 KiB) Viewed 5065 times

DSCN3335.JPG (173.11 KiB) Viewed 5065 times

DSCN3337.JPG (213.37 KiB) Viewed 5065 times

[CT_Shooter]

Excellent job, PT7! That project was well considered and executed. Love it. And thanks for once again showing us your way too cool, hand made Siberian knife, as a bonus. Great photos!

[JEBar]

nicely done .... looking forward to seeing it first hand at our KC gathering

[Mags]

.
Well done!

I posted this a couple of days ago as a DIY woodworking project. http://henryrifleforums.com/viewtopic.php?f=56&t=7309 Here is the finished BP pistol loading stand I just built. Thought this tool would fit okay under forum "Black Powder Guns."
When I went to my first BP range shoot, I had no idea this loading equipment was needed. I'm definitely more prepared for my next range time! ~~~PT7

[BigAl52]

Nice job PT and I bet you had fun doing that. So when is your next shoot with that BP pistola. Im thinking you cant wait.

[PT7]

Appreciate that, Al. It was fun to work at this project.

I also posted a similar thread with photos on the Muzzleloaders Forum, just in case I didn't get it all together. I had no "blueprints," so had to build it from recalling what the one stand looked like I saw at the BP shoot. One member did let me know of a potential problem I could have.

He said there is no support to the pistol grip (back of it near the small "crook" at the top. The force of the ramrod from whenever I load a patch and round ball could possibly break the grip. So the suggestion was to add another padded block of wood to let the pistol rest on the back of the grip. I think I can do that, but it's simply back to the drawing board!!

Yeah, I'd like to shoot again, sooner rather than later. So as soon as I get this stand ready, and the weather is mostly clear of rain, I'll go for it.

PT7

[BigAl52]

I think you can do that also. He might be also shooting the TC Patriot which they did have issues with that happening.

[ESquared]

Very cool, PT! Functional, compact, nicely finished, it's got it all! Thanks for sharing and I, too, look forward to seeing it in person soon!

[RanchRoper]

That looks very good and functional. Nice job. That is one cool pistol.

[dave77]

Very nice. Most of my BP shooting was with a rifle so I just held my pistol grip on my thigh when loading it while bench shooting. One thing I did use when bench shooting was a small rubber mallet to start the ball. Lot easier on your hand, also made a ramrod with a flat smooth piece of antler, it spread the force out on your hand more than the ones with a ball. Also used it alone to load on trail walks.

I think I posted a photo of my pistol a while back but here it is again.

[PT7]

Cool. Like the looks of your antler ramrod. Talk about smooth!

Cool again. Sharp-looking pistol. Especially like your wood grain a lot!
Wouldn't mind having a checkered grip like you have. Sure would be easier to grip the grip.

Thanks for your post.
PT7

Very nice. Most of my BP shooting was with a rifle so I just held my pistol grip on my thigh when loading it while bench shooting. One thing I did use when bench shooting was a small rubber mallet to start the ball. Lot easier on your hand, also made a ramrod with a flat smooth piece of antler, it spread the force out on your hand more than the ones with a ball. Also used it alone to load on trail walks.

I think I posted a photo of my pistol a while back but here it is again.

[PT7]

HURRAH! COMPLETED MY "MOD" today and added a grip support wood block. Check out the photos. Should protect the grip in case I get carried away with the ramrod!

Ready to saddle up and get to the range again. Not only to try out the loading stand, but to shoot BP. Fun-Fun.

DSCN3343.JPG (147.87 KiB) Viewed 4654 times

DSCN3338.JPG (153.45 KiB) Viewed 4654 times

DSCN3339.JPG (163.27 KiB) Viewed 4654 times

DSCN3341.JPG (191.35 KiB) Viewed 4654 times

[BrokenolMarine]

Nice work... I like the way you adjusted with the suggestions from the more experienced shooters.

[GunnyGene]

HURRAH! COMPLETED MY "MOD" today and added a grip support wood block. Check out the photos. Should protect the grip in case I get carried away with the ramrod!

Ready to saddle up and get to the range again. Not only to try out the loading stand, but to shoot BP. Fun-Fun.

Good idea on the padding. If you get revolver, you'll want to make one for it also. I made one for mine a while back that folds down to save some space in a bag. The major difference between one for a single shot and a revolver is that you have to provide a cut out for the cylinder so you can rotate it in the stand.

[PT7]

Thanks, Gunny. What I like about your build is that it folds down. Mine is quite bulky and no way can fit in any bag. However, I do have a strong piece of twine attached to the rear wall as a carry handle. Never showed that in my photos. But I definitely have the fold down feature in mind, if I were to build another loading stand someday.

No plans on getting a revolver. I have always wanted a single shot firearm, and the Trapper is perfect. Plus I've found that I really like shooting BP, mainly because of the loading activity and relaxed pace between shots. A very new shooting experience for me.

Good idea on the padding. If you get revolver, you'll want to make one for it also. I made one for mine a while back that folds down to save some space in a bag. The major difference between one for a single shot and a revolver is that you have to provide a cut out for the cylinder so you can rotate it in the stand.

[Mistered]

in case I get carried away with the ramrod!

You Shouldn't have to get too 'carried away' with the ramrod but I am wondering how much pressure are you having to exert on it to seat the ball?

[PT7]

in case I get carried away with the ramrod!

You Shouldn't have to get too 'carried away' with the ramrod but I am wondering how much pressure are you having to exert on it to seat the ball?

Very little. I can seat the round ball with my thumb.

[Mistered]

Very little. I can seat the round ball with my thumb.

This almost sounds a little 'loose'. You might want to up your patch thickness a couple thou.
What is your current patch thickness?

[PT7]

This almost sounds a little 'loose'. You might want to up your patch thickness a couple thou.

Loads and shoots just fine so far.
Will keep your suggestion in mind...thx.

[dave77]

Does seem a little loose to me but if it shoots fine I guess it's OK. Mine is a .44 cal. using .433 balls and it takes a pretty good whack to start the ball, that was why I started using the rubber mallet. I did use pre-cut patches that were fairly thick.

Maybe you have exceptionally strong thumbs.

BTW, have you seen a BP speed loader yet?