I’m going to get in BIG trouble...

[Redthies]

Redthies, I checked the link for your avatar and it pointed to the website you used to create it. It no longer exists on that website. What you need to do is re-create your avatar at that site, download it to your own computer, then upload it to the forum as your avatar in your profile. Let me know if you have any trouble. Good luck.

I use an iPad so would that same process work? Every site seems a bit different.

[CT_Shooter]

I use an iPad so would that same process work? Every site seems a bit different.

If you can download the file to your iPad, then yes. You should also be able to upload it from the iPad to the forum. Give it a try and let us know how you make out. I'm sure you aren't the only member using a phone or tablet to access the forum.

[Redthies]

And look forward to seeing pics of the completed project, lever wraps, peepsight, all of it!

As requested, pics below. I really like Skinners products! The front sight is much nicer than the factory original, and gives a bit more sight picture than the round bead.

[ESquared]

Fantastic set-up there! Can't wait for a range report. Beautiful combination!

[Redthies]

Thanks! If you look close in the second pic, you can see the rear dovetail that I made my own filler for. I used a non-permanent and non-traditional method which was originally going to just be for my hunting trip next week, but it blends so well I may just leave it.

[Mags]

.
that it does, so leave it.

... but it blends so well I may just leave it.

[Redthies]

Care to guess what the magic filler is?

[Cofisher]

I'm going with J B Weld...or play doh

[Mags]

.
wood chip/permanent marker?
black licorice chewing gum?
chip of abs plastic?

Care to guess what the magic filler is?

[CT_Shooter]

Care to guess what the magic filler is?

It looks like some sort of transparent tape; maybe shipping tape. Whatever it is, it looks good.

[Redthies]

Some good guesses there. I very briefly considered JB Weld, but that’s pretty damn permanent, so I grabbed the tube of black silicone gasket maker. The brand I have was actually almost an exact match for color and sheen. I can get it out of there in about 2 minutes if I need to. A little masking tape around the slot, and scraped it smooth with a plastic razor blade. A little bit hillbilly, but 100% reversible.

[Mags]

.
that was going to be my next guess....

Some good guesses there. I very briefly considered JB Weld, but that’s pretty damn permanent, so I grabbed the tube of black silicone gasket maker. The brand I have was actually almost an exact match for color and sheen. I can get it out of there in about 2 minutes if I need to. A little masking tape around the slot, and scraped it smooth with a plastic razor blade. A little bit hillbilly, but 100% reversible.

[Redthies]

Chewing gum is a great idea too, but I HATE the taste of black licorice!

[Mags]

.
i can handle cherry once in a while, but ya black licorice is offal. might as well be chewing a tar ball. ah, there is new idea tar ball as a filler. hmmm maybe not. might get a little gooey when the barrel gets hot.

Chewing gum is a great idea too, but I HATE the taste of black licorice!

[roddy]

Good idea...I never thought of black silicone. LOL, mine might be even more "hillbilly" than that though...

If your choice brand of barrel filler is "CRAYOLA", you might be a redneck.

Yes I did.

[Firearmfanatic]

I thought it was electrical tape. But that's a great idea with the silicone, especially if its a high temp. I think it will work as long as it doesn't pose a threat to the finish on the barrel. Im just thrownin this out there, bit i know they also make a satin black spray paint for bbq grills. It's also a high temp paint. It's sprays on smooth and its nothing high gloss. I came across the idea of painting my glass packed mufflers on my truck when i upgraded to a dual exhaust. It worked out great as a smooth high temp finish. Great looking rifle!! I can't wait to hear about the results later on.

[Redthies]

I thought it was electrical tape. But that's a great idea with the silicone, especially if its a high temp. I think it will work as long as it doesn't pose a threat to the finish on the barrel.

Yes, it is a high temp silicone. It won’t affect the bluing at all.

Since you mentioned paint, does anyone know what the finish is on the steel receiver? It’s definitely not blued like the barrel. I don’t recall seeing it mentioned on Henry’s site.

Edit: Found them saying it’s matte bluing on their site. That’s good as the paint thing strikes me as a bit cheesy!

[Mags]

There is a recent post here on that .... I'll see if I can find it for you.

... Since you mentioned paint, does anyone know what the finish is on the steel receiver? It’s definitely not blued like the barrel. I don’t recall seeing it mentioned on Henry’s site.

[Redthies]

There is a recent post here on that.... I'll see if I can find it for you.

I edited my post... found it on Henry’s site saying matte bluing. I’d be curious if someone says otherwise though...

[Mags]

.
Assuming we're talking about the same thing "Superblack" http://henryrifleforums.com/viewtopic.p ... int#p71557

There is a recent post here on that.... I'll see if I can find it for you.

I edited my post... found it on Henry’s site saying matte bluing. I’d be curious if someone says otherwise though...