CCH Large Loop?

Post by **ESquared** » Thu Nov 15, 2018 8:04 am

There are now a few of us who have a CCH rifle of one stripe or another, but ownership certainly isn't necessary to weigh in on this.

It's a bit odd to me that Henry's factory spec for this line does NOT include a CCH lever. I'm guessing it's a cost of goods/price point issue.

Anyway, they offer a Large Loop CCH Lever as an aftermarket part for 85 bucks. I have a large loop Henry (SGC), while the rest are small loops, and, from a feel and function standpoint, I couldn't list any differences. I have big hands and, even with gloves (a couple of layers of gloves, in fact), the regular size loop works fine for me. So, to me, it's just cosmetics.

What do you all think? Is the large loop CCH lever too much/too big on the CCH lineup? Is it too much CCH overall? Is $85 just too much for a cosmetic upgrade, no matter how big or small it is?

I'm truly on the fence. Any opinions?

https://henrypride.com/collections/rifl ... loop-lever

Post by **BigAl52** » Thu Nov 15, 2018 9:14 am

Come on Evan. I know what Lucas McCain would say

Post by **JEBar** » Thu Nov 15, 2018 9:24 am

IF they ever come up with a large loop lever (CCH or standard blue) for our CCH 45-70 with a pistol grip, I'll place an order the day I find out about it

Mistered · Post by **Mistered** » Thu Nov 15, 2018 9:40 am

Is $85 just too much for a cosmetic upgrade, no matter how big or small it is?

Yes, if it's not needed. Thats a lot of powder, ball & cap.
And besides I would hardly call it 'cosmetic' - it takes away from the trim appearance of most lever action rifles.

Post by **PT7** » Thu Nov 15, 2018 9:51 am

Since you asked, Evan, I will share an opinion even though I don't have a Henry CCH rifle. All of the new SA revolvers I've recently acquired have components that are CCH....that finish does provide a sharp-looking design.

When you noted it is just cosmetics, that is an important part of it. You also said that either the large loop or small loop work well (feel & function) for you on your rifles. If it were me, I would just answer this question about how my rifle looks: Do I like the CCH appearance so much that it would be FUN to have a CCH large loop lever on my Henry? Finally, $85 would not be an excessive expense, if you really want to have a CCH large loop lever.

I've done very little cosmetic changes to my Henrys, and the same approach now for my new ownership of SA Cowboy-action revolvers. Mostly prefer the stock look, as that is how I decide on which firearm to get. I did a little of the "fence riding" you're doing when I special ordered a bronze receiver-mounted Skinner peep to replace the stock rear sight on my SGC. It was spendy. But that "touch of bronze," as I hoped it would, added a really special appearance to my Carbine. Glad I don't often go after such mods; but this one turned out great.

Best as you decide...that is fun, too. Sure hope there are not too many splinters in that fence you're riding!

PT7

ESquared wrote:There are now a few of us who have a CCH rifle of one stripe or another, but ownership certainly isn't necessary to weigh in on this.

It's a bit odd to me that Henry's factory spec for this line does NOT include a CCH lever. I'm guessing it's a cost of goods/price point issue.

Anyway, they offer a Large Loop CCH Lever as an aftermarket part for 85 bucks. I have a large loop Henry (SGC), while the rest are small loops, and, from a feel and function standpoint, I couldn't list any differences. I have big hands and, even with gloves (a couple of layers of gloves, in fact), the regular size loop works fine for me. So, to me, it's just cosmetics.

What do you all think? Is the large loop CCH lever too much/too big on the CCH lineup? Is it too much CCH overall? Is $85 just too much for a cosmetic upgrade, no matter how big or small it is?

I'm truly on the fence. Any opinions?

https://henrypride.com/collections/rifl ... loop-lever

Post by **ESquared** » Thu Nov 15, 2018 9:57 am

BigAl52 wrote:Come on Evan. I know what Lucas McCain would say

Hilarious. Spot on!

tractortad · Post by **tractortad** » Thu Nov 15, 2018 10:22 am

JEBar wrote:IF they ever come up with a large loop lever (CCH or standard blue) for our CCH 45-70 with a pistol grip, I'll place an order the day I find out about it

I think they do offer one on their Henry Pride website - $50 for a big loop lever that fits H010 and H018 Henry's... It is also offered in CCH.

Post by **JEBar** » Thu Nov 15, 2018 10:34 am

tractortad wrote:
JEBar wrote:IF they ever come up with a large loop lever (CCH or standard blue) for our CCH 45-70 with a pistol grip, I'll place an order the day I find out about it
I think they do offer one on their Henry Pride website - $50 for a big loop lever that fits H010 and H018 Henry's... It is also offered in CCH.

OUTSTANDING .... I called Henry shortly after buying our 45-70 and was told that they didn't have them .... didn't realize they have now been added .... can only wish one with a CCH finish is available .... looks like I now know for sure what I want to buy myself for Christmas ..

.. info appreciated ...

Post by **ESquared** » Thu Nov 15, 2018 11:18 am

I don't see such a CCH lever (Large Loop for H018/H010) on Henry Pride. Am I just too blind to see it?

Post by **PT7** » Thu Nov 15, 2018 11:26 am

Is this the one Tractortad is noting?
https://henrypride.com/collections/rifl ... 2256333849

ESquared wrote:I don't see such a CCH lever (Large Loop for H018/H010) on Henry Pride. Am I just too blind to see it?

Post by **JEBar** » Thu Nov 15, 2018 11:34 am

I believe so .... when I call to place the order, I will double check .... we have the large loop levers on our 44 and 357 Mags and I really like them

Post by **ESquared** » Thu Nov 15, 2018 11:37 am

PT7 wrote:Is this the one Tractorad is noting?
https://henrypride.com/collections/rifl ... 2256333849

ESquared wrote:I don't see such a CCH lever (Large Loop for H018/H010) on Henry Pride. Am I just too blind to see it?

That's what has be puzzled. The lever in that link isn't a CCH lever.

Post by **JEBar** » Thu Nov 15, 2018 11:46 am

ESquared wrote:That's what has be puzzled. The lever in that link isn't a CCH lever.

understood .... I want a large loop lever .... I'd prefer it to have a CCH finish but will most certainly take one that isn't .... its just my luck, fairly quickly after I order a regular one, they will come out with one with a CCH finish ...

Post by **Mags** » Thu Nov 15, 2018 1:00 pm

.
For CCH should be this one to fit H010 (straight stock).
https://henrypride.com/collections/rifl ... loop-lever

PT7 wrote:Is this the one Tractortad is noting?
https://henrypride.com/collections/rifl ... 2256333849

ESquared wrote:I don't see such a CCH lever (Large Loop for H018/H010) on Henry Pride. Am I just too blind to see it?

Post by **Cofisher** » Thu Nov 15, 2018 1:04 pm

Nope. https://henrypride.com/collections/rifl ... loop-lever

Post by **Mags** » Thu Nov 15, 2018 1:14 pm

.
Note the fine print. Straight stock only. Not for pistol grip.

Cofisher wrote:Nope. https://henrypride.com/collections/rifl ... loop-lever

Post by **ESquared** » Thu Nov 15, 2018 1:28 pm

The Website listing is basically wrong. It says that the CCH Large Loop Lever (in the links above) will fit Model H010, but the only 45-70 with a CCH receiver has a pistol grip, which the $85 CCH Large Loop Lever will not fit. Confusing.

tractortad · Post by **tractortad** » Thu Nov 15, 2018 2:02 pm

JEBar wrote:
tractortad wrote:
JEBar wrote:IF they ever come up with a large loop lever (CCH or standard blue) for our CCH 45-70 with a pistol grip, I'll place an order the day I find out about it
I think they do offer one on their Henry Pride website - $50 for a big loop lever that fits H010 and H018 Henry's... It is also offered in CCH.

OUTSTANDING .... I called Henry shortly after buying our 45-70 and was told that they didn't have them .... didn't realize they have now been added .... can only wish one with a CCH finish is available .... looks like I now know for sure what I want to buy myself for Christmas .. .. info appreciated ...

yea - I'm thinking about adding one to our CCH 45-70, too...

tractortad · Post by **tractortad** » Thu Nov 15, 2018 2:09 pm

Mags wrote:.
Note the fine print. Straight stock only. Not for pistol grip.
Cofisher wrote:Nope. https://henrypride.com/collections/rifl ... loop-lever

My bad - they don't carry a CCH big loop for the pistol grip H010's. I didn't read the fine print, but at least they have a blued one...

Post by **JEBar** » Thu Nov 15, 2018 2:23 pm

ESquared wrote:The Website listing is basically wrong. It says that the CCH Large Loop Lever (in the links above) will fit Model H010, but the only 45-70 with a CCH receiver has a pistol grip, which the $85 CCH Large Loop Lever will not fit. Confusing.

ALERT --

what do I do when I see something I don't understand about a Henry product ..

.. yep, I called Henry and ended up speaking directly with a lady in their accessories department .... they got their first shipment of 50 CCH levers in last night ... she said they are "flying" out the door .... both the black and CCH large loop levers now shown on their website will fit ALL 45-70's with a pistol grip stock .... just rechecked the website and (true to her word) the red warning has been removed .... following a short discussion with my CFO, one has been ordered ..

.. should be here within a week (I anticipate longer because of the Thanksgiving Holiday

Henry Rifle Forums

CCH Large Loop?

CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?

Re: CCH Large Loop?