Ok, I was prepping some once fired 35R brass that the s- n- l and I split a couple weeks back. We're going to visit them next week. He has a Rem 600 in 35R that he got from his grandfather. While there we will try and work up a load for it.
So I sized and primed all the cases, and loaded a few to start with.
Back during the summer a member on Marlinowners mentioned Ramshot Tac as a good powder for the 35 & 30-30. In my travels I found a lb of it and to my surprise it was the cheapest powder I've purchased all year.

Anyway I decided I would try a little in one of my Marlin's, so I looked at the data and started in the middle. Wholly crap what I stumbled onto, I was not expecting that. It shot well enough in the chopped '74 RC that I came back in the house and loaded 10 more as to try in the other 2 35s. Well here's the results, not bad for a guess and starting place.
First is the '74 rc that I had chopped to 16.5"π«’

then the 1960 JC Higgins and a Savage model 170 pump.
On the '74 rc target, the first shot was the high right, the small hole below it is a 22 lr that the grandson put there.:)then the next four all touched.
Can't wait to see how they perform in that 600.

- 20231219_083219.jpg (1.43 MiB) Viewed 1227 times

- 20231219_094122.jpg (1.08 MiB) Viewed 1227 times

- 20231219_094126.jpg (2.48 MiB) Viewed 1227 times
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012