What did you do at your reloading bench today?

[Mags]

Cleaned primer pockets and primed cases for 45 colt.

[Vaquero]

Last night I deprimed the days brass, 357, 44, 45 colt and a few 444's.
Then the 45's and 444 brass took a bath, and should be dry by now.

RP

[NHshtr]

Loaded additional .243 Win in 95 gr. Hornady SSTs and 85 gr. Sierra Prohunters. Used Varget for 95s and RL15 (scarce as hen's teeth) with the 85s.
Also a load of .44 mag. with 240 gr, XTPs with another round of H110 and Enforcer. Last time, I loaded some with Enforcer and some with H110, and 240 XTPs, the Enforcer was quite close to the performance of the H110. At 100 yards, 5 shots, I got 1.7" with H110 and 1.9" with the Enforcer. This new batch has a couple of load variations and I have to chrony the Enforcer loads. But seems like Enforcer is a good .44 powder.

[Mags]

Finished the last of the 45 Colt reloads. 200gr Gallant coated with #5. No more 45 Colt brass, until I shoot some.
Started on de-prime/resizing of 30-30.

[DsGrouse]

Primed the remainder of 800 cases of 9mm

[5shot]

In the process of loading a batch of new Starline brass for my pair of K38 Model 14-3's. Using 148 RCBS wadcutters (154 gr with my alloy) sized to .358" and loaded over 3.3 gr. of Bullseye. I've been using WSP primers which have performed well but have some Federal small pistol match that I want to try.

[Mags]

Finished 60 de-prime/resizing of 30-30.

[Mags]

Last night, cleaned 60 30-30 primer pockets.

[fortyshooter]

Chilly rainy day so finally got around to going thru my cans of spent brass and cleaning a bunch of .44 Mag and .44 Special. These cans were the ones I bring back from the range and I still have my larger containers of stored brass to deprime and clean under the bench that I go thru at times.
Noticed I have a bunch of 38 Special brass to clean and this has lead to another gun project to find a use for 38 Special.

[Mags]

Sized, deburred and primed the 30-30 cases.