Spring has sprung. Get out and shoot your Henry
Cheek weld
- Sir Henry
- Administrator / Owner
- Posts: 12178
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: Price County Wisconsin
Re: Cheek weld
I have used a cheek (and nose) weld on a 38 Mare's Leg without any problem but I would be reluctant to shoot it in 357.
1 x
Hi, my name is Gene and I'm a Henryholic from Wisconsin.
Range Reporter: Henry Repeater
Range Reporter: Henry Repeater
- Iron Horse Cowboy
- Tenderfoot
- Posts: 13
- Joined: Tue May 12, 2020 9:03 pm
- Location: Georgia
Re: Cheek weld
I use the cheek hold style (putting the side of the butt-nub along my cheek) when I shoot my .44 mag ML. No problems at all. Makes the ML a more accurate and viable weapon for me.
1 x
- Vaquero
- Ranch Boss
- Posts: 10382
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: Cheek weld
Had a friend of mine shoot a Contender in 223 once, he wasn't holding it as good as he should have.
Came back and smacked him pretty good, never wanted to shoot it again.
RP
0 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Re: Cheek weld
Barring artistic freedom and being before photography when searching the history of the matchlock rifle a great amount of pictures show what could be called a Mares leg style stock being shot with a cheek weld. I’m still looking but I’m sure that I have seen photos of American Indians with long guns whose stocks have been cut back short. I’ve been shooting a H001 with a 16” barrel and a shortened stock to make a OAL of 26 1/8” using a cheek hold and I have become quite good with it off hand. I’m thinking one of Henry’s single shots in a centerfire might just be my next venture into my short stock craziness.
1 x
Re: Cheek weld
If you want a hoot. Go with a contender in a rifle caliber like 30-30 or find one in .35 rem. If you scope it, make sure the scope has a 2 foot eye relief and don't hug it. It is not a one hand hold!
1 x
Re: Cheek weld
I have only taken my Henry 357 to the range twice, so far. Shooting 357 has a very low recoil felt. No problem with cheek weld. Firing rested and free hand.
The only thing I have added after first trip is a sling that I use with arm through loop to help support gun when firing freehand.
Have also fired .38 special and it is even less as most of you know. I have been getting my wife use to firing this rifle has only fired the 38s.. She was warry of the 357 mag. So after she gets more comfortable with the rifle firing the 38s.. She will shoot 357, that is when she feels ready.
The only thing I have added after first trip is a sling that I use with arm through loop to help support gun when firing freehand.
Have also fired .38 special and it is even less as most of you know. I have been getting my wife use to firing this rifle has only fired the 38s.. She was warry of the 357 mag. So after she gets more comfortable with the rifle firing the 38s.. She will shoot 357, that is when she feels ready.
1 x
- RanchRoper
- Forum Ambassador
- Posts: 12697
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta
Re: Cheek weld
I changed my shooting style a year or so ago, and have been shooting better I think. I now put the crescent butt between the bicep and the shoulder instead of tucked in tight on the shoulder. Works better for me and I don't have to have my face mashed into the stock. The crescent butt locks in there quite nicely and i can get on target fast with more accuracy. My breathing is more relaxed too as I am not all hunched up. Works for me, maybe not for others.
1 x
1860 Colt SA Richards Conversion Revolver .45C
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
- North Country Gal
- Firearms Advisor
- Posts: 6121
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin
Re: Cheek weld
Interesting, RR. From what I've been able to research, that is the intended use of a crescent buttplate. Also, traditional guns with a lot of drop in the comb, such as the brass Henry's, were not intended to be used with a check weld. You were supposed to keep your head high, not bent down and tucked down on the stock. The idea was for the gun stock to put the iron sights in line with your eye without bending your neck. Shooting styles, like guns, have also changed over the years.
1 x
- RanchRoper
- Forum Ambassador
- Posts: 12697
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta
Re: Cheek weld
I am hoping this style will work well with the 1885 tang sight (whenever the gun shows up!!!....still waiting)...
0 x
1860 Colt SA Richards Conversion Revolver .45C
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
- North Country Gal
- Firearms Advisor
- Posts: 6121
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin