Jammed rimfire --- How dangerous is it?
Posted: Wed May 30, 2018 7:22 am
So as not to de-rail the thread posted by Bugs http://henryrifleforums.com/viewtopic.php?f=7&t=4582 , I'd like to ask you guys & gals to share any good advice or your methods used to safely extract a misfired rimfire cartridge. I am curious because I've had this happen, although rare, with my .22LR Henry, and a little more often with a .22LR Ruger semi-auto. I've not focused on the potential danger when pulling at a live cartridge, because I have tunnel vision and only want to "get it out of the gun." Guess I'm saying that I don't think through any safety factors first. My bad.
What helped me "see" my tunnel vision is this. In the "nose dive" thread, albin225's response is a pretty strong warning from my perspective: "...extreme caution..." <and> "...especially rimfire..."
So, albin225, could you expand on your comments, either from experience, or the "whys" for such an definitive warning?
OK. The reason I ask is that answers I've read elsewhere are at opposite ends of the pole. As an example, one forum thread had these very clear differences (copied below, exactly as stated). I've included the OPs original question; there were a total of 16 responses to the question, and I've posted only 9 of them:
PT7
What helped me "see" my tunnel vision is this. In the "nose dive" thread, albin225's response is a pretty strong warning from my perspective: "...extreme caution..." <and> "...especially rimfire..."
So, albin225, could you expand on your comments, either from experience, or the "whys" for such an definitive warning?
OK. The reason I ask is that answers I've read elsewhere are at opposite ends of the pole. As an example, one forum thread had these very clear differences (copied below, exactly as stated). I've included the OPs original question; there were a total of 16 responses to the question, and I've posted only 9 of them:
Appreciate any further insight from all you Henry folk. Seems to me an important issue.~~~QUESTION -- What is the best way to remove a misfired (still potentially live) rimfire round from a gun when it is still in the chamber with the action open?
ANSWERS
~~~Just don't use any "sharp" movements. Rimfire isn't all that sensitive.
~~~.Prying it out is not going to subject the rim to enough pressure to fire the round assuming you don't go all Incredible Hulk on it.
~~~It's probably not gonna go off, unless you use a really ridiculous amount of force.
~~~I'd be very leary of prying an already-struck rimfire cartridge out by that same rim unless it's extremely loose.
~~~Just use your fingernail or a pocket knife blade and flip it out.
It ain't rocket science.
And it ain't gonna go off.
~~~Fingernail, small flathead screwdriver or knife blade. Zero chance of you causing it to go off.
~~~I reiterate the recommendation not to fool with the rim of an already-struck rimfire unless already extremely loose. For one thing you may have sensitized the primer compound that you are prying around. For the other, you necessarily have your eyes on/near that open breech/cartridge.
~~~There is no "safe" way to approach this..... a live primer is all kinds of bad.
PT7
albin25 wrote:Use extreme caution prying on a live cartridge, especially rimfire....
That admonishment aside, that looks exactly like what I had to deal with, when my cousin accidentally loaded one cartridge backwards.
