- B7F5195C-7F60-455F-8EC9-53E49F85DBCD.jpeg (310.53 KiB) Viewed 703 times
Spring has sprung. Get out and shoot your Henry
Too pointy?
-
- Tenderfoot
- Posts: 17
- Joined: Tue Jun 07, 2022 3:16 am
Too pointy?
Are these .357 rounds too pointy to be safely shoved into the side gate of a Big Boy? They are PPU FMS 158 grain. If so, how about loading them down the brass tube? I happened to have these around for use in a revolver at the range. Appreciate solid advice...thanks!
0 x
Re: Too pointy?
I wouldn't use them in any tube fed gun. Recoil, plus mag spring pressure might be sufficient to cause a primer ignition in the tube. Not a risk I'd be willing to take.
Last edited by GunnyGene on Sat Jun 18, 2022 8:47 am, edited 3 times in total.
2 x
Bellum Omnium Contra Omnes is rapidly becoming a reality (11/2023). Para Bellum.
-
- Tenderfoot
- Posts: 17
- Joined: Tue Jun 07, 2022 3:16 am
Re: Too pointy?
That said, I think it would be ok if you never have more than one in the mag tube at a time. So you could load 2 thru the gate, chamber one, fire it, and chamber the 2nd as normal.
0 x
Bellum Omnium Contra Omnes is rapidly becoming a reality (11/2023). Para Bellum.
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19340
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
- Vaquero
- Ranch Boss
- Posts: 10320
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: Too pointy?
With the others, I wouldn't.
RP
RP
0 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
- markiver54
- Deputy Marshal
- Posts: 10305
- Joined: Sun Nov 04, 2018 11:49 am
- Location: Biue Ridge Mountains, NC
Re: Too pointy?
There's really no " point " in doing it, with all the other options to choose from.
Save it for the revolver.
Save it for the revolver.
0 x
I'm your Huckleberry
Re: Too pointy?
I agree with all the others. Just wondering have you considered reloading? Plenty of RNFP available in 357 which work good in a Boy 357. Even with expensive primers you can churn out quality ammo at a savings over factory ammo.
0 x