The Hobby Room

[Sir Henry]

I don’t have a gun room. I have a hobby room where my hobby is firearms. I’ve spent many hours in this room reloading and tinkering with my Henrys. I don’t reload anymore but still like to handle my firearms and have a place to photograph them.

The six ceiling lights in this room are bright light 23w LED putting out 1600 lumens each. That is a lot of light that can be pointed at the center table.

5005C5A7-22C4-4096-9A6D-EDBCB7AB8564.jpeg (108.72 KiB) Viewed 7149 times

This is a crude rifle stand that can be used for holding rifles for cleaning or a range trip.

8873FA37-C01D-4DAA-B27C-492DD4408F4E.jpeg (131.63 KiB) Viewed 7149 times

I had a tanker desk under the cupboards. It will be replaced with a double counter high center table. Ammo cans will be sacked where the old desk was.

2D730B2A-9A90-4ED3-AFE9-9B76BE786AF3.jpeg (159.62 KiB) Viewed 7149 times

After the large safe is back I will reattach four steel Stack-On cabinet where it’s not painted. I still need to do the ceiling line and touch up a few spots.

5E389170-0819-4277-A5E2-BF925A1D3FBC.jpeg (163.46 KiB) Viewed 7149 times

The rain has been so heavy a range trip would not be a fun trip. Might as well stay home and work. I hope to get a lot done in the next week so a range trip would be a great reward.

[JEBar]

very nice .... you have a really nice area which you can configure most any way you like .... looking forward to seen pictures of the finished product

[BigAl52]

I like the view out the window to. Looks good Gene

[RetiredSeabee]

Thanks for the tour of the outer edge of the infamous Sir Henry aka Lithgow 303 firearms and ammunition bunker system. Just having a little fun with you. Memories of some discussions long ago on Ruger.net Some folks got their pantys in a wad over hoarding ammo way back when.
Good to see you back in the hobby room.

[Sir Henry]

Thanks for the tour of the outer edge of the infamous Sir Henry aka Lithgow 303 firearms and ammunition bunker system. Just having a little fun with you. Memories of some discussions long ago on Ruger.net Some folks got their pantys in a wad over hoarding ammo way back when.
Good to see you back in the hobby room.

You can’t say pantys in a wad in this forum. lol

[RetiredSeabee]

Thanks for the tour of the outer edge of the infamous Sir Henry aka Lithgow 303 firearms and ammunition bunker system. Just having a little fun with you. Memories of some discussions long ago on Ruger.net Some folks got their pantys in a wad over hoarding ammo way back when.
Good to see you back in the hobby room.

You can’t say pantys in a wad in this forum. lol

How about Pantays?

[Mags]

.
"panties in a wad" isn't G-rated?

Thanks for the tour of the outer edge of the infamous Sir Henry aka Lithgow 303 firearms and ammunition bunker system. Just having a little fun with you. Memories of some discussions long ago on Ruger.net Some folks got their pantys in a wad over hoarding ammo way back when.
Good to see you back in the hobby room.

You can’t say pantys in a wad in this forum. lol

[ChefDuane]

Is there a reason that you'd line up your long guns underneath the window? I'd be afraid of smash and grab.

[Sir Henry]

Is there a reason that you'd line up your long guns underneath the window? I'd be afraid of smash and grab.

The house is built on a slope and that window is high about the ground. Part of my security is being invisible. Hence the name hobby room and not gun room.

[Sir Henry]

The room is taking shape. I picked up the Craftsman tool cart yesterday and put it together. I think I’m going to remove the wheels to lower it and make it more stable.

[Hatchdog]

Sir Henry, that room is really taking shape. I think your wall color selection is fantastic and that giant tool box fits in nicely. Like you, I have what I call my gun room because it shares space with my reloading/gun work bench, “Gun stuff” dresser, ammo storage, safes and my office desk. A nice multi-use room like yours. Love the old school gun rack on top of your tool chest.

[Sir Henry]

Sir Henry, that room is really taking shape. I think your wall color selection is fantastic and that giant tool box fits in nicely. Like you, I have what I call my gun room because it shares space with my reloading/gun work bench, “Gun stuff” dresser, ammo storage, safes and my office desk. A nice multi-use room like yours. Love the old school gun rack on top of your tool chest.

Thanks. I need to unload the toolbox and take the wheels off. It will make it lower and make it more stable. The gun rack holds three Henrys. All brasslite.

[Sir Henry]

The wheels are off the tool chest and the Stack-On cabinets are bolted to the wall along with the gun rack. The tool chest is out far enough from the wall so the upper cover can be opened enough to lock the drawers.

Doesn’t look like much work but it’s taken me most of the day.

75B436B5-54CD-451C-906A-464D9EC013E9.jpeg (113.72 KiB) Viewed 6522 times

[BigAl52]

Looks good Gene. I can tell you have put alot of time in the entire process. But Im sure when its all done it will be worth it and Gene will enjoy shooting again.

[Vaquero]

Lookin good Gene.
Almost time to enjoy it.

RP

[Sir Henry]

I tore out the old home made shelf and bought a Craftsman bench.

D8A91F13-CAB6-4884-A9E5-2563E756E24E.jpeg (158.3 KiB) Viewed 6458 times

60B9D441-A976-41C0-84C5-9183D0642168.jpeg (102.3 KiB) Viewed 6458 times

I had to assembly it inside the closet.

41EC5F54-FF4D-488C-BB38-5DF7CC1CD5EA.jpeg (134.79 KiB) Viewed 6458 times

[BigAl52]

That looks good Gene

[Ernie]

I had to assembly it inside the closet.
[/quote]

What a great idea to put the reloading area in the closet with good front access. You could lock it to keep little hands out if necessary.

[Greyhawk]

Looks great sir! I'm excited for you!

[Sir Henry]

I had to assembly it inside the closet.

What a great idea to put the reloading area in the closet with good front access. You could lock it to keep little hands out if necessary.
[/quote]

It is nice to be able to close it off. Sometimes something needs to be torn apart for several days. Good way of preventing missing screws.