Page 1 of 1
Henry Big Boy 45 Colt Ejection not Good
Posted: Fri Aug 16, 2019 6:06 pm
by Lead Head
I have been getting empties not ejecting out of the rifle. I thought maybe I wasn't operating the lever rapidly enough so I made it point to work the action faster. That helped with most of the fired rounds. Shooting off a bench tends to cause me to work the action more slowly. BUT, with the last round fired, the empty will rarely eject out of the rifle. It simply falls down into the action where a loaded round would be but there is no loaded round there when it has been fired and will not eject.
To be clear, extraction is not a problem. It seems like the extractor isn't holding the shell casing firmly enough against the face of the bolt and letting the empty fall away from the bolt face before hitting the ejector.
Any suggestions?
Re: Henry Big Boy 45 Colt Ejection not Good
Posted: Fri Aug 16, 2019 7:20 pm
by RanchRoper
Make HRA aware of the problem. They will look after you.
Re: Henry Big Boy 45 Colt Ejection not Good
Posted: Fri Aug 16, 2019 8:29 pm
by JEBar
my 44 had the same issue with the last shell case not ejecting .... had to send it back to Henry ... works great now ... as RR recommended, you'd be wise to give them a call
Re: Henry Big Boy 45 Colt Ejection not Good
Posted: Fri Aug 16, 2019 8:58 pm
by Mags
.
As recommended by the others, call HenryCS. Henry Contacts:
http://henryrifleforums.com/viewtopic.php?f=5&t=5127
Lead Head wrote: ↑Fri Aug 16, 2019 6:06 pm
I have been getting empties not ejecting out of the rifle. I thought maybe I wasn't operating the lever rapidly enough so I made it point to work the action faster. That helped with most of the fired rounds. Shooting off a bench tends to cause me to work the action more slowly. BUT, with the last round fired, the empty will rarely eject out of the rifle. It simply falls down into the action where a loaded round would be but there is no loaded round there when it has been fired and will not eject.
To be clear, extraction is not a problem. It seems like the extractor isn't holding the shell casing firmly enough against the face of the bolt and letting the empty fall away from the bolt face before hitting the ejector.
Any suggestions?