The site is secure and should have a favicon. Time to celebrate Henry's again!
Problem with new Henry
-
Mcarlcochran
- Tenderfoot
- Posts: 4
- Joined: Sun Feb 23, 2025 4:56 pm

Problem with new Henry
All,
I have just bought a new Henry 45-70 brass side gate 22" barrel. I am experiencing feeding issues with the Hornady LeverEvolution 325gr ammo. On the first round the cartridge will get stuck on the carrier with only about .25in if the cartridge coming out of the magazine. The action will be stuck open and I have to take a cleaning rod to push the round back into the magazine with great difficulty. This has happened 3 times in 15 rounds. Is it just this ammo or do you think there is a magazine issue? Thanks
I have just bought a new Henry 45-70 brass side gate 22" barrel. I am experiencing feeding issues with the Hornady LeverEvolution 325gr ammo. On the first round the cartridge will get stuck on the carrier with only about .25in if the cartridge coming out of the magazine. The action will be stuck open and I have to take a cleaning rod to push the round back into the magazine with great difficulty. This has happened 3 times in 15 rounds. Is it just this ammo or do you think there is a magazine issue? Thanks
You do not have the required permissions to view the files attached to this post.
Re: Problem with new Henry
Does this always happen with the first round levered from a full magazine?
Officially the magazine holds 4 rounds, if you squeeze 5 in, then you might get too much compression on the mag tube spring resulting in too much pressure on the carrier/lifter group in the receiver.
Also, when operating the lever, remember to do so with firm rapid authority.
Officially the magazine holds 4 rounds, if you squeeze 5 in, then you might get too much compression on the mag tube spring resulting in too much pressure on the carrier/lifter group in the receiver.
Also, when operating the lever, remember to do so with firm rapid authority.
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
Re: Problem with new Henry
Try also cleaning the tube
Don't let the old man in
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
-
Mcarlcochran
- Tenderfoot
- Posts: 4
- Joined: Sun Feb 23, 2025 4:56 pm

Re: Problem with new Henry
I was only loading 3 rounds at a time for sighting the rifle in. Happened 3 times out of 15 rounds. About every other time u loaded it
- BrokenolMarine
- Ranch Foreman
- Posts: 7058
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains

Re: Problem with new Henry
Call Henry Customer Service and talk with them. They will get you straight one way or another. You might need to send the rifle back, but normally the turnaround time is quick.
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
I don't look back at the things I can't do anymore with regret, I just look forward to the things I still can.
by the way he treats those who can do nothing for him.
I don't look back at the things I can't do anymore with regret, I just look forward to the things I still can.
Re: Problem with new Henry
Ya, call Henry on that.Mcarlcochran wrote: ↑Tue Feb 25, 2025 8:56 amI was only loading 3 rounds at a time for sighting the rifle in. Happened 3 times out of 15 rounds. About every other time u loaded it
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
-
Mcarlcochran
- Tenderfoot
- Posts: 4
- Joined: Sun Feb 23, 2025 4:56 pm

Re: Problem with new Henry
Thanks, I have called Henry and got a shipping label. I'm going to try different ammo first before sending it out.
Re: Problem with new Henry
If you haven't sent your rifle back to Henry, you might think of taking it down and seeing if it has any built of grease or foreign matter. I had a BBS that was full of a substance that looked like fiberglass covered with goo. I cleaned the gun then relubed it. It worked good after that.
You do not have the required permissions to view the files attached to this post.
Re: Problem with new Henry
I hope they get it straightened out for you. That is the only round I shoot and have never had a feeding issue.
Where's the ammo, dammit! Vietnam 66-67
- CT_Shooter
- Administrator emeritus
- Posts: 5468
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut

Re: Problem with new Henry
Mcarlcochran wrote: ↑Tue Feb 25, 2025 7:53 pmThanks, I have called Henry and got a shipping label. I'm going to try different ammo first before sending it out.
H006M Big Boy Brass .357 - H001 Classic .22LR - Uberti / Taylors & Co. SmokeWagon .357 5.5" - Uberti / Taylors & Co. RanchHand .22LR 5.5"