Spring has sprung. Get out and shoot your Henry
Side Gate Retrofit
- jstanfield103
- Cowhand
- Posts: 379
- Joined: Sat Nov 12, 2016 4:45 pm
- Location: Kentucky
Re: Side Gate Retrofit
So my question would be if Henry does not make a kings gate model in Brass (as of yet, they do have it in the steel) is the Brass frame for that action not strong enough for the gate ?
0 x
Aim Small, Miss Small
Re: Side Gate Retrofit
They make one in brass for the 30-30 and 45-70, so apparently the brass is strong enough.
1 x
- Vaquero
- Ranch Boss
- Posts: 10256
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: Side Gate Retrofit
Speaking altering rifles...
I have been playin around with the idea of buying a Henry single shot 44 mag., and
Having the chamber reamed to 444.
RP
I have been playin around with the idea of buying a Henry single shot 44 mag., and
Having the chamber reamed to 444.
RP
1 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
- North Country Gal
- Firearms Advisor
- Posts: 6054
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin
Re: Side Gate Retrofit
Back in the early days of TC Contenders (before we had Encores), re-chambering 10" and 14" 44 mag barrels to 444 was fairly common, despite the vicious recoil. It was really pushing the limits of what those old Contenders could take, though, and people did stretch Contender frames, even with factory 444 loads. Doubt it would be an issue in the Henry, though. If you're going to do it yourself, just remember the 444 has some taper to it. It's not just an extra long 44 mag.
1 x
- Vaquero
- Ranch Boss
- Posts: 10256
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: Side Gate Retrofit
Naw, the reaming is a little above my pay grade...
I'll have it done professionally, I contacted Henry a while back about their receivers.
They use the same one for pistol and rifle calibers.
So there shouldn't be an issue with it, if it can handle the 308's and 45-70's.
Then it can handle the t-4.
I also called JES about reboring a 30-30 single shot to 38-55.
He said no problem, and that I'd only have to send the barrel.
I figure if I can't get Henry to make what "I" want, I'll just do it myself.
RP
I'll have it done professionally, I contacted Henry a while back about their receivers.
They use the same one for pistol and rifle calibers.
So there shouldn't be an issue with it, if it can handle the 308's and 45-70's.
Then it can handle the t-4.
I also called JES about reboring a 30-30 single shot to 38-55.
He said no problem, and that I'd only have to send the barrel.
I figure if I can't get Henry to make what "I" want, I'll just do it myself.
RP
1 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
- jstanfield103
- Cowhand
- Posts: 379
- Joined: Sat Nov 12, 2016 4:45 pm
- Location: Kentucky
Re: Side Gate Retrofit
Yes they make it in the larger frames with a gate but the 357 is not the same frame as the 45/70 or the 30-30. So maybe the frame is not strong enough with the extra material removed for the gate. I can't believe that Henry would not make a gate on the smaller frames if it was possible. So that makes me think that the frame is not strong enough for that material to be removed ?
0 x
Aim Small, Miss Small
- markiver54
- Deputy Marshal
- Posts: 10281
- Joined: Sun Nov 04, 2018 11:49 am
- Location: Biue Ridge Mountains, NC
Re: Side Gate Retrofit
They make the BB All Weather, the BB Steel X and the BB CCH with a side gate in 357.
0 x
I'm your Huckleberry
- Vaquero
- Ranch Boss
- Posts: 10256
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: Side Gate Retrofit
The only one of those appeal to me is the CCH.markiver54 wrote: βTue Sep 20, 2022 8:47 amThey make the BB All Weather, the BB Steel X and the BB CCH with a side gate in 357.
And I do like those.
RP
0 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012