Spring has sprung. Get out and shoot your Henry

I need a part made.

Post Reply
Warlock
Tenderfoot
Posts: 12
Joined: Sat Jun 18, 2022 7:23 pm
United States of America

I need a part made.

Post by Warlock » Thu Jul 07, 2022 10:27 am

After four years of looking for a lever action suppressor host, my son and I go bee boppin in the new Scheels in Missoula and find not only the Henry X chambered for 45LC for my son, I find my 44mag Henry X.

Since both rifles will be fired with and without a suppressor screwed on the end, I constantly worry about losing my thread protector.

I am hoping there is a machinist with a Henry X here because I have an Idea.

The knurled part of the mag tube has 1 pin holding to the tube making it pretty easy to remove. My idea is to have a machined part made that fits the mag tube correctly and has a portion of threads so I can take my thread protector off the barrel and then screw it on the threaded portion of the knurled knob. Basically, double the length of the knurled knob and thread half of it and knurl half of it.

What does the forum think about this?
1 x
You only think you're alone.

User avatar
BrokenolMarine
Ranch Foreman
Posts: 5770
Joined: Sat Nov 26, 2016 8:28 am
Location: South Central Oklahoma in the mountains
United States of America

Re: I need a part made.

Post by BrokenolMarine » Thu Jul 07, 2022 10:33 am

I would suggest it to Henry. Next thing you know it will be offered in the catalog. Since it was your idea, maybe they'll send you a couple to beta test for ten or twenty years... You know, quality control and all. 8-)
1 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.

User avatar
fortyshooter
Ranch Foreman
Posts: 6270
Joined: Sat Dec 09, 2017 10:37 am
Location: Va.
United States of America

Re: I need a part made.

Post by fortyshooter » Thu Jul 07, 2022 1:13 pm

Great idea! I have a 45X on the way and will take a look.
1 x

User avatar
Vaquero
Ranch Boss
Posts: 10255
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: I need a part made.

Post by Vaquero » Thu Jul 07, 2022 8:34 pm

fortyshooter wrote:
Thu Jul 07, 2022 1:13 pm
Great idea! I have a 45X on the way and will take a look.
I was just about to say this would be right up your alley, buddy. ;) :D
Can't wait to see this. :mrgreen:

RP
0 x
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
Vaquero
Ranch Boss
Posts: 10255
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: I need a part made.

Post by Vaquero » Thu Jul 07, 2022 8:36 pm

Welcome to the forum Warlock.

RP
0 x
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
Hatchdog
Ranch Foreman
Posts: 5212
Joined: Mon Jan 06, 2020 5:04 pm
Location: Deer Park, WA
United States of America

Re: I need a part made.

Post by Hatchdog » Fri Jul 08, 2022 10:16 am

Good luck with your thread protector idea but I have to say that finding two X models in stock is awesome. Hmmmmmm Missoula is only about 6 hours away…maybe a road trip in my future. :lol:
0 x

Warlock
Tenderfoot
Posts: 12
Joined: Sat Jun 18, 2022 7:23 pm
United States of America

Re: I need a part made.

Post by Warlock » Sun Jul 10, 2022 4:16 pm

Gentlemen, I appreciate the welcome to the forum and the helpful posts.

I have no access to a machine that would be capable of tooling this kind of part. Fortyshooter, if you figure out how to make this type of part, I would be happy to pay you for your time and knowledge. Let me know if you come up with something cool.

Hatchdog, I'm only 40 minutes away from the Missoula Scheels. I will keep an eye open for any more X models but I just read your info under your name. Sorry.

I understand that with the part I am imagining, there will be exposed threads to get mucked up and ruined. Hopefully the installed part is protected by the barrel itself. Hopefully.

I think the part would work the best being turned out of steel or any metal that would serve the purpose. I'm not an expert but I believe a 3D printed device just wouldn't stand up to the inevitable wear and tear.

I haven't contacted Henry Rifles yet, it will be interesting to hear what they have to say about this. If I get a reply, I will post it here.

Again, Thank you guys for the welcome and ideas. I think if folks see this part or something like it, Henry or whoever makes and markets the part can make a decent profit from it. Thinking about it a little more, the Henry X isn't the only threaded lever action type rifle on the matket.

I realize this seems to be a lot of work for an item that is made for a non-problem but I am sure I am not the only person who worries about losing the thread protecter.

Thank you again, JW
1 x
You only think you're alone.

Ozarkwoodswalker
Cowboy
Posts: 1088
Joined: Thu Nov 01, 2018 9:24 pm
Location: Missouri
United States of America

Re: I need a part made.

Post by Ozarkwoodswalker » Mon Jul 11, 2022 4:47 am

New ideas are what got us out of the caves and into warm dry homes. Some ideas work, and some don't, I'm excited to hear a thinking man put forth a interesting thought. I encourage you to push on with it. 👍👍👍👍👍
0 x

User avatar
Sir Henry
Administrator / Owner
Posts: 12052
Joined: Sun Mar 20, 2016 10:58 pm
Location: Price County Wisconsin
United States of America

Re: I need a part made.

Post by Sir Henry » Mon Jul 11, 2022 9:51 am

BrokenolMarine wrote:
Thu Jul 07, 2022 10:33 am
I would suggest it to Henry. Next thing you know it will be offered in the catalog. Since it was your idea, maybe they'll send you a couple to beta test for ten or twenty years... You know, quality control and all. 8-)
Maybe they will call it the Warlock Nut.
1 x
Hi, my name is Gene and I'm a Henryholic from Wisconsin.

Range Reporter: Henry Repeater

Post Reply