Page 1 of 1

First outing with Big Boy .357

Posted: Thu Jan 13, 2022 1:41 pm
by Old School Guns
Got by my local range with a new side-gate .357, 20" barrel and large loop.

It shot beautifully off-hand at 25 yards. That would be the usual range for deer on my property, in thick brush.

Put 60 of several types of rounds downrange, all 158 gr bullets. Did some test shots first with a Blackhawk before switching the rifle.

The photos are from the Henry: One shows 4 shots of .357 fp, the other 10 shots (2 flyers) of .38 +p load in .357 brass with that same Acme 158 gr fp.

The gun chambered all rounds well unless I short-stroked the lever. Henry made a winner.
IMG_1886.JPG
IMG_1885.JPG
IMG_1884.JPG

Re: First outing with Big Boy .357

Posted: Thu Jan 13, 2022 5:21 pm
by Headhog
That's a fine looking rifle and they do shoot well. I have a BBS 357 mag 20" but it a pre-side gate. I love that rifle. The more you shoot it the smoother the action gets. I feed both 357 mag and 38 spl ammo thru mine. With lite loads, it's a great plinker or load it up and go get you a deer. Enjoy!

Paul

Re: First outing with Big Boy .357

Posted: Fri Jan 14, 2022 4:23 pm
by Old School Guns
Headhog wrote:
Thu Jan 13, 2022 5:21 pm
That's a fine looking rifle and they do shoot well. I have a BBS 357 mag 20" but it a pre-side gate. I love that rifle. The more you shoot it the smoother the action gets. I feed both 357 mag and 38 spl ammo thru mine. With lite loads, it's a great plinker or load it up and go get you a deer. Enjoy!

Paul
These were stiff .38 loads and they were so light that I checked for squibs. The gun's balance is simply better than any other rifle I've shot.

FWIW, at 75 feet my POA for all shots were between the two targets. I was pleased, though the .38s did not group as well as they might have done. Operator error!

Re: First outing with Big Boy .357

Posted: Fri Jan 14, 2022 8:51 pm
by RanchRoper
Good job.

Re: First outing with Big Boy .357

Posted: Fri Jan 14, 2022 10:04 pm
by fortyshooter
Great shooting with that new .357 Henry!

Re: First outing with Big Boy .357

Posted: Sat Jan 15, 2022 9:05 am
by Vaquero
Good shootin, and yes the ole 357 out of a rifle is just pure joy.

RP

Re: First outing with Big Boy .357

Posted: Sat Jan 15, 2022 11:10 am
by Hatchdog
I’ve said it before and I’ll say it again.

A 357 rifle or carbine will make grown men and women giggle. :D

Re: First outing with Big Boy .357

Posted: Sat Jan 15, 2022 5:33 pm
by Headhog
Old School Guns wrote:
Fri Jan 14, 2022 4:23 pm
Headhog wrote:
Thu Jan 13, 2022 5:21 pm
That's a fine looking rifle and they do shoot well. I have a BBS 357 mag 20" but it a pre-side gate. I love that rifle. The more you shoot it the smoother the action gets. I feed both 357 mag and 38 spl ammo thru mine. With lite loads, it's a great plinker or load it up and go get you a deer. Enjoy!

Paul
These were stiff .38 loads and they were so light that I checked for squibs. The gun's balance is simply better than any other rifle I've shot.

FWIW, at 75 feet my POA for all shots were between the two targets. I was pleased, though the .38s did not group as well as they might have done. Operator error!
Just wait till you load up some 357 mag rounds. I think you will be so much more than pleased. The Henry BBS is a fine shooter and just plain fun to play with. :D :D

Paul

Re: First outing with Big Boy .357

Posted: Sat Jan 15, 2022 5:35 pm
by Headhog
Randy & Hatch you know the fun of blasting away with a 357 mag carbine load. ;)

Paul

Re: First outing with Big Boy .357

Posted: Sat Jan 15, 2022 5:52 pm
by JVogler
Those Big Boy steel 357 magnums are good looking and shoot well right out of the box. In the hands of someone who's a better shot than I the accuracy only goes up.

Re: First outing with Big Boy .357

Posted: Mon Jan 17, 2022 7:39 pm
by rdblackmon99
I love mine too. Enjoy!!!!

Re: First outing with Big Boy .357

Posted: Sun Jan 23, 2022 9:58 am
by Old School Guns
JVogler wrote:
Sat Jan 15, 2022 5:52 pm
Those Big Boy steel 357 magnums are good looking and shoot well right out of the box. In the hands of someone who's a better shot than I the accuracy only goes up.
Braced on a tree branch in the woods, it should deliver venison nicely. I will test my all-copper .357s through it first.

Re: First outing with Big Boy .357

Posted: Tue Jan 25, 2022 4:28 pm
by Bobberfishin
I was waiting for the Big Boy w/ side gate in 357mag to become available & finally last Sept I got one.
Then had to get Golden Boy just to plink & then a "Silver" Golden Boy came available for $400 & I couldn't pass it up

Re: First outing with Big Boy .357

Posted: Tue Jan 25, 2022 5:38 pm
by Rifletom
Bobberfishin wrote:
Tue Jan 25, 2022 4:28 pm
I was waiting for the Big Boy w/ side gate in 357mag to become available & finally last Sept I got one.
Then had to get Golden Boy just to plink & then a "Silver" Golden Boy came available for $400 & I couldn't pass it up
Nice purchases there; do enjoy. Really like your screen name. Old school fishing at it's most fun. :D

Re: First outing with Big Boy .357

Posted: Tue Jan 25, 2022 5:42 pm
by Rifletom
Old School Guns wrote:
Sun Jan 23, 2022 9:58 am
JVogler wrote:
Sat Jan 15, 2022 5:52 pm
Those Big Boy steel 357 magnums are good looking and shoot well right out of the box. In the hands of someone who's a better shot than I the accuracy only goes up.
Braced on a tree branch in the woods, it should deliver venison nicely. I will test my all-copper .357s through it first.
Oh, you're going to like that .357 more and more. All copper rounds; interesting. Is that required, or they work well in your rifle?

Re: First outing with Big Boy .357

Posted: Sat Jan 29, 2022 8:37 am
by Old School Guns
[/quote]

Oh, you're going to like that .357 more and more. All copper rounds; interesting. Is that required, or they work well in your rifle?
[/quote]

My wife is involved in wildlife conservation and supports hunting; she schooled me on copper rounds for hunting to avoid lead left in places like vernal pools. I use all-copper slugs in my shotgun and Winchester 70 as well. We built a berm for our outdoor range and one day I'll get around to digging the lead out and smelting it (retirement project).