Awesome! The turnaround wasn't too bad was it?
Spring has sprung. Get out and shoot your Henry
How to remove bolt from new side gate BB models
- Kissmybrass
- Cattle Driver
- Posts: 594
- Joined: Tue May 04, 2021 1:00 pm
- Location: Issaquah
Re: How to remove bolt from new side gate BB models
Awesome! The turnaround wasn't too bad was it?
0 x
H010G 45-70
H006M Big Boy Classic .357
Sig 320 XCompact
S&W 686 Plus 5"
Rem 870 Tac
H006M Big Boy Classic .357
Sig 320 XCompact
S&W 686 Plus 5"
Rem 870 Tac
Re: How to remove bolt from new side gate BB models
No, it wasn't. Took about 3 days each way from Oregon to Wisconsin. Henry had both rifles for under 3 days. CS was good, just wish I didn't have to use them.
1 x
-
- Tenderfoot
- Posts: 4
- Joined: Thu Apr 21, 2022 12:00 pm
- Location: Colorado
Re: How to remove bolt from new side gate BB models
Gents, I'll use my first post here to ask if there's any information that confirms Henry is no longer shipping the Big Boys in .357 Magnum with over-sized hammers? I'd like to think my recently produced unit was shipped without that issue. Thanks for any insight you might provide. (Just trying to avoid opening up the rifle 'til I get some more rounds through it, if possible.)
0 x
I'm out of my mind. But feel free to leave a message!
Re: How to remove bolt from new side gate BB models
Interesting, I pulled my 45lc bolt out without issue. It had some nasty sticky oil on it. I did not clean it before shooting like I normally would. I am glad to read that Henry took care of the problem.
0 x
- fortyshooter
- Ranch Foreman
- Posts: 6306
- Joined: Sat Dec 09, 2017 10:37 am
- Location: Va.
Re: How to remove bolt from new side gate BB models
A bit off the topic but is Henry making the side gates in the CCH finish? I have yet to see one.
0 x
Re: How to remove bolt from new side gate BB models
I thought there was a guy on here with a 357 and a CCH finish.
0 x
- pennsylvaniapete
- Wrangler
- Posts: 95
- Joined: Sun May 29, 2022 9:39 pm
- Location: Parts Unknown! I think I Am in Texas!??
Re: How to remove bolt from new side gate BB models
Pennsylvaniapete residing in Texas territory just took deliver of a new .357/.38 rifle. It is CCH, side gate loading, 20 in octagon barrel. Straight stock. It was made in the middle of June. No problem with removing the bolt.
Took it to range yesterday…..no problem with .357 ammo or .38 ammo
Took it to range yesterday…..no problem with .357 ammo or .38 ammo
1 x
- jstanfield103
- Cowhand
- Posts: 379
- Joined: Sat Nov 12, 2016 4:45 pm
- Location: Kentucky
Re: How to remove bolt from new side gate BB models
One thing about Henry. For the most part they will do their best to satisfy any problems that they have caused and most problems that you have caused. Great company.
0 x
Aim Small, Miss Small
Re: How to remove bolt from new side gate BB models
[quote=fortyshooter post_id=197260 time=1650632545 user_id=2338]
A bit off the topic but is Henry making the side gates in the CCH finish? I have yet to see one.
[/quote Here is my 357 carbine.
A bit off the topic but is Henry making the side gates in the CCH finish? I have yet to see one.
[/quote Here is my 357 carbine.
You do not have the required permissions to view the files attached to this post.
1 x