Spring has sprung. Get out and shoot your Henry

I need a brake

User avatar
Freedom
Tenderfoot
Posts: 23
Joined: Sat May 27, 2023 7:40 pm
Location: Hotlanta
United States of America

I need a brake

Post by Freedom » Fri Jun 02, 2023 6:54 pm

I'd like to put a brake on my X-Model 45-70 and after looking around a bit there seems to be two options. The first is the one made by Hughes Precision on the Henry website. The other is the Comet that Ranger Point sells. Has anyone here used either of them? If so, I'd like to hear your thoughts.

Thanks
0 x

User avatar
Shakey Jake
Drover
Posts: 4285
Joined: Wed Aug 16, 2017 11:10 am
Location: Sugar Land, TX
Contact:
United States of America

Re: I need a brake

Post by Shakey Jake » Fri Jun 02, 2023 7:47 pm

1 x

User avatar
Freedom
Tenderfoot
Posts: 23
Joined: Sat May 27, 2023 7:40 pm
Location: Hotlanta
United States of America

Re: I need a brake

Post by Freedom » Sat Jun 03, 2023 8:56 pm

Shakey Jake wrote:
Fri Jun 02, 2023 7:47 pm
Witte
https://wittmachine.net/
Jake
I wasn't aware of Witte. Thanks Jake!
0 x

User avatar
DsGrouse
Cattle Driver
Posts: 678
Joined: Mon Nov 22, 2021 8:07 am
United States of America

Re: I need a brake

Post by DsGrouse » Sat Jun 03, 2023 10:06 pm

If you plan on getting a can here is one i use with mu bushwacker 46 v2.

https://www.griffinarmament.com/taper-mount-ez-brake/

Incidentally, a can will decrease the recoil significantly.
1 x

User avatar
Freedom
Tenderfoot
Posts: 23
Joined: Sat May 27, 2023 7:40 pm
Location: Hotlanta
United States of America

Re: I need a brake

Post by Freedom » Sun Jun 04, 2023 7:35 pm

DsGrouse wrote:
Sat Jun 03, 2023 10:06 pm
If you plan on getting a can here is one i use with mu bushwacker 46 v2.

https://www.griffinarmament.com/taper-mount-ez-brake/

Incidentally, a can will decrease the recoil significantly.
Thanks for the info, but I'm not quite ready to try a can just yet.
1 x

John E Davies
Cattle Driver
Posts: 882
Joined: Sun Dec 11, 2016 10:48 pm
Location: Spokane WA
United States of America

Re: I need a brake

Post by John E Davies » Sun Jun 04, 2023 9:08 pm

I am not certain how well this would work with .45/70, it was great with hot .44 Mag loads. You might want to contact Kaw Valley and ask.

IMG_3731.jpeg

https://henryrifleforums.com/viewtopic ... ey#p142556


John Davies
Spokane WA
You do not have the required permissions to view the files attached to this post.
1 x

dfc5343
Tenderfoot
Posts: 13
Joined: Sat May 28, 2022 3:13 pm
United States of America

Re: I need a brake

Post by dfc5343 » Tue Jun 06, 2023 1:45 am

RP. Works great to reduce recoil and allow acess to the tube mag.
1 x

Bake
Cowhand
Posts: 105
Joined: Sun Nov 29, 2020 7:34 pm
United States of America

Re: I need a brake

Post by Bake » Tue Jun 06, 2023 11:32 am

Is there anyone still doing "Mag-an-port"? I believe it was initially for magnum-powered handguns, then became very commonplace in Skeet and trap, 12 gauge shotguns, and from time to time you would see them in rifles. The ports would be cut into the original barrel. Thus eliminating the need to add a two or three-inch "Donkey Dick" extension on the end of the barrel . . .
Last edited by Bake on Thu Jun 08, 2023 4:42 pm, edited 1 time in total.
1 x

User avatar
Freedom
Tenderfoot
Posts: 23
Joined: Sat May 27, 2023 7:40 pm
Location: Hotlanta
United States of America

Re: I need a brake

Post by Freedom » Tue Jun 06, 2023 3:21 pm

Lots of good info here. Thanks folks!

Bake, Mag-na-port is indeed still in business.
https://magnaport.com/rifle.html

Guess it's time to make up my mind and brake out the card.
0 x

rickhem
Cowhand
Posts: 163
Joined: Mon Aug 22, 2022 7:44 am
Location: Schoharie County, NY
United States of America

Re: I need a brake

Post by rickhem » Tue Jun 27, 2023 1:24 pm

Just for the discussion, I'll offer some things I learned with compensators on handguns. And I'm posting because there is a lot of "grey area" between the definitions of a compensator and a muzzle brake.
I had a .45 built up for Bullseye, and bowling pins, and steel plates, and basically general purpose target shooting. I wanted a compensator because that seemed to be the hot new thing at the time. The guy building it for me said he wanted to know what I'd be doing most, and he'd set the comp up for that. His reason was that bullseye uses much lighter loads than you'd use for pins, and that meant that the comp would have a lot less gas to work with. I'll admit that I never thought of it in that context. He said that the .38 Super comps worked best because those were much higher pressure loads, and much more gas to work with. I'm thinking that a .45-70 may follow that same path as the lighter bullseye loads, especially with it being a former black power cartridge and not generating as much pressure.
So if you want a brake for the uniquness of having one, all well and good, but if you are looking for recoil reduction, and possibly reduction of muzzle rise, then having something designed to work with 45-70 class cartridges is worth looking into. They're not all created equal.

As for magnaport, the shotgun porting works amazingly well. A buddy had a .375JDJ Contender with porting and that didn't kick anywhere near what I though it would, but I don't have all that much experience with it beyond that.
0 x

Post Reply