Page 1 of 1

Outside Dining Anyone?

Posted: Mon Sep 07, 2020 12:43 pm
by Sir Henry
Sorry I don’t have anything firearms related to post about. My life is currently focusing on owner improvements and the year I get major landscaping projects completed.

While the completed re-roofing allows the outdoor kitchen to be functional it is not fully completed. The fun part is still left which is go to junk dealers, antiques shops and garage sales to make functional more user friendly and create a visual comfortable feeling.

Note the target stabled to the right post and the backstop with bullet traps on the left. Just trying to make this more about shooting.
1AE4C035-15C0-4B90-AF41-828EA9262553.jpeg
1AE4C035-15C0-4B90-AF41-828EA9262553.jpeg (425.61 KiB) Viewed 3595 times
I’ll post more about the new 36” griddle when I’ve used it more. I’ve made pancakes for myself about a dozen times however I’ve never cooked bacon and eggs on it. My general impression is that it is a hit.

Edit: picture and text added below.

This is the view to the left of the targets. Still
some construction debris to deal with.
9124BD36-B9FB-4086-B817-110BE434EEA9.jpeg
9124BD36-B9FB-4086-B817-110BE434EEA9.jpeg (405.31 KiB) Viewed 3589 times

Re: Outside Dining Anyone?

Posted: Mon Sep 07, 2020 12:46 pm
by Cofisher
Looks very comfortable. Nice work Sir Henry.

Re: Outside Dining Anyone?

Posted: Mon Sep 07, 2020 12:54 pm
by JEBar
very, very nice setting .... just curious, because in our area skeeters and a host of other bugs would have to be contended with

Re: Outside Dining Anyone?

Posted: Mon Sep 07, 2020 1:32 pm
by Sir Henry
JEBar wrote:
Mon Sep 07, 2020 12:54 pm
very, very nice setting .... just curious, because in our area skeeters and a host of other bugs would have to be contended with
The lowlands here are fairly skeet free. Go up into the mountains and that is a different story. No my biggest concern is bear. It is common to have a bear on my property a few times a year. There was a momma and three cubs in the neighborhood last summer and a neighborhood text going on bear sightings. Most days there were several reports of sightings.

Re: Outside Dining Anyone?

Posted: Mon Sep 07, 2020 7:51 pm
by North Country Gal
Love the colorful decorating, Gene. Visually very interesting. If you have bears, how do you deal with them? We have to be very careful about not leaving anything they might eat in the yard. We have dogs and that tends to keep them away, too.

Re: Outside Dining Anyone?

Posted: Mon Sep 07, 2020 9:56 pm
by BigAl52
Ill take 2 eggs over easy with bacon and pancakes. I prefer real maple syrup but if I gotta take Mrs Butterworths I will use it. Can I shoot my pellet rifle while eating?

Re: Outside Dining Anyone?

Posted: Mon Sep 07, 2020 11:36 pm
by Sir Henry
North Country Gal wrote:
Mon Sep 07, 2020 7:51 pm
Love the colorful decorating, Gene. Visually very interesting. If you have bears, how do you deal with them? We have to be very careful about not leaving anything they might eat in the yard. We have dogs and that tends to keep them away, too.
People have learned not to leave food out. I don’t think the bears associate people with food like in campgrounds. Dogs here are also usually the first alarm.

Re: Outside Dining Anyone?

Posted: Mon Sep 07, 2020 11:38 pm
by Sir Henry
BigAl52 wrote:
Mon Sep 07, 2020 9:56 pm
Ill take 2 eggs over easy with bacon and pancakes. I prefer real maple syrup but if I gotta take Mrs Butterworths I will use it. Can I shoot my pellet rifle while eating?
I’m trying the real syrup soon. Yes on the bacon and eggs and shooting. 8-)

Re: Outside Dining Anyone?

Posted: Wed Sep 09, 2020 4:55 am
by Team Roper
Looks real cozy and now I am hungry.

Re: Outside Dining Anyone?

Posted: Fri Sep 11, 2020 8:36 am
by daytime dave
Very cool surroundings Gene. As someone once said, I love what you've done with the place.

Re: Outside Dining Anyone?

Posted: Fri Sep 11, 2020 10:12 am
by Sir Henry
daytime dave wrote:
Fri Sep 11, 2020 8:36 am
Very cool surroundings Gene. As someone once said, I love what you've done with the place.
Thanks Dave, it’s been a labor of love.

Re: Outside Dining Anyone?

Posted: Sat Sep 26, 2020 4:42 pm
by Sir Henry
I had two metal cupboards in the garage that wasn’t critical there so I moved them to the kitchen. They are dented, scratched and rusted but cleaned up pretty good. Next summer I might rattle can paint them.
BC67DF5B-3EC3-442A-81DD-F1091CB0C2EC.jpeg
BC67DF5B-3EC3-442A-81DD-F1091CB0C2EC.jpeg (295.5 KiB) Viewed 3141 times
919978E9-8DBC-4D40-9694-32383C410519.jpeg
919978E9-8DBC-4D40-9694-32383C410519.jpeg (143.35 KiB) Viewed 3141 times

Re: Outside Dining Anyone?

Posted: Tue Nov 03, 2020 6:08 pm
by Sir Henry
I found this griddle cover (on the left) today at Value Village. I was looking for one because Blackstone is out of them. What is great about it other than the $2.99 price is that it’s a Revere Ware and made in the USA. Not only that but most of my pots and lids are Revere (on the right).

Then I stopped at Target and found a Lodge burger press which is also made in the USA. The Henry coffee cup is my everyday cup and we all know where it’s made.
5112D5F1-FE7E-4FB6-B001-4BF3269D2E57.jpeg
5112D5F1-FE7E-4FB6-B001-4BF3269D2E57.jpeg (201.14 KiB) Viewed 3098 times
I’m still looking for plates.

Re: Outside Dining Anyone?

Posted: Tue Nov 03, 2020 8:07 pm
by BigAl52
What time are we eating

Re: Outside Dining Anyone?

Posted: Wed Nov 04, 2020 10:25 am
by Sir Henry
BigAl52 wrote:
Tue Nov 03, 2020 8:07 pm
What time are we eating
Eat some left over candy while I finish my first cup of coffee. ☕️ Raining this morning.

In the meantime I’m trying to figure out when that lid was made.

Re: Outside Dining Anyone?

Posted: Wed Nov 04, 2020 11:50 am
by Sir Henry
As a diversion from the news I’m posting about my pots and pans.
E8EC1C7E-045D-488C-9F0F-DF7C0E070564.jpeg
E8EC1C7E-045D-488C-9F0F-DF7C0E070564.jpeg (319.46 KiB) Viewed 3082 times
This is a double ring which means it was made before 1968.
40F0C4B0-DA36-4DAE-A155-C1C3F1BEBC39.jpeg
40F0C4B0-DA36-4DAE-A155-C1C3F1BEBC39.jpeg (201.48 KiB) Viewed 3082 times
You can’t read it in the picture but this one is a patent pending which means it was made before 1939.
5ECF9712-A6D2-43A4-9AAC-584ECDFD3D6F.jpeg
5ECF9712-A6D2-43A4-9AAC-584ECDFD3D6F.jpeg (183.25 KiB) Viewed 3082 times
The next two are Clinton, ILL so they are before 1977 but no double rings so after 1968.
E6A6696D-F423-4B4E-996E-151333E39F3E.jpeg
E6A6696D-F423-4B4E-996E-151333E39F3E.jpeg (260.3 KiB) Viewed 3082 times
90E4CCCE-36DB-4352-B233-C49C3C93178B.jpeg
90E4CCCE-36DB-4352-B233-C49C3C93178B.jpeg (190.41 KiB) Viewed 3082 times
A non copper bottom made in Clinton.
FD3C9580-243B-48D6-A65E-0B383B860A54.jpeg
FD3C9580-243B-48D6-A65E-0B383B860A54.jpeg (180.2 KiB) Viewed 3082 times
West Bend makes a far superior teapot.
402651B6-950B-4821-92E9-0C3FAF41D0CC.jpeg
402651B6-950B-4821-92E9-0C3FAF41D0CC.jpeg (252.01 KiB) Viewed 3082 times
This is the griddle lid I just bought. It looks fairly new and lids are almost impossible to date.
070AD515-9C64-40E5-AE8D-56DD15912957.jpeg
070AD515-9C64-40E5-AE8D-56DD15912957.jpeg (172.86 KiB) Viewed 3082 times
Older aged lids.
426DDBA1-B107-4068-9F97-ABF1B990E9E0.jpeg
426DDBA1-B107-4068-9F97-ABF1B990E9E0.jpeg (211.25 KiB) Viewed 3082 times
AFA303E7-E7C8-4049-8BB2-067E9931B5CD.jpeg
AFA303E7-E7C8-4049-8BB2-067E9931B5CD.jpeg (147.42 KiB) Viewed 3082 times
The later handles had screws and not rivets like the bottom handle. This particular one is still pre-68.
BFDC59DA-83AA-4F26-8E46-9619C26FFFDC.jpeg
BFDC59DA-83AA-4F26-8E46-9619C26FFFDC.jpeg (121.04 KiB) Viewed 3082 times
New handles and screws are still available. If you see one like this with a screw it has been replaced as rivets were never available after it left the factory.
1D8BE7D4-F9DC-42F8-875B-B2238448A1A3.jpeg
1D8BE7D4-F9DC-42F8-875B-B2238448A1A3.jpeg (155.71 KiB) Viewed 3082 times
Some of these I’ve owned since the 70’s and some I’ve picked up at garage sales and junk stores. Kind of an odd hobby but it beats watching the news.

Re: Outside Dining Anyone?

Posted: Wed Nov 04, 2020 12:06 pm
by Sir Henry
I had to refresh what I knew about the handles. Rivets came after screws not before like I was thinking.

This is an older handle with screws but has the original screw with no slot on the left side. Later replacement screws had the slot on both sides.
7F138B1B-B1A2-45F1-B4F0-AD5AC7F0B4D8.jpeg
7F138B1B-B1A2-45F1-B4F0-AD5AC7F0B4D8.jpeg (114.7 KiB) Viewed 3082 times
https://en.wikipedia.org/wiki/Revere_Ware