Page 1 of 1
Ringin Steel and 41 Bowlin
Posted: Sat Feb 29, 2020 7:18 pm
by BigAl52
Went to my favorite spot on the Pawnee Grasslands today. Just took out one rifle. Its my favorite caliber BBS 41 mag. Took some bags of odds and ends I had loaded up and shot a couple 100 rounds through the 41. Rang the 8 inch and 6 inch steel plates. I also picked on the bowlin pins. I did have one load that I was going to load up for a test load just recently. But when I got to lookin at my loaded rounds I discovered I had loaded it already

Loaded up 10 rounds for my old buddie Randy. Alternated between the 2 steel plates. No fence to lean on just shot at them off hand. Not going to say how many times I missed. Anyway shot the target here posted off the roof of the ole Bonneville at 25 yards with my test load. I think it might be a keeper. I made a small sight adjustment after this raising the center diamond in the sight. Oh I also turn the annoying diamond around. Dont care for that diamond at all. Next picture shows how bowlin pins fair against the 210 gr bullets out of the 41. Oh the load I was using is 8 gr of Unique with that Xtreme 210 gr plated flat point. Its shoots very good in mine. Had a great time.

- IMG_1294.JPG (152.6 KiB) Viewed 1550 times

- IMG_1295.JPG (187.76 KiB) Viewed 1550 times
Re: Ringin Steel and 41 Bowlin
Posted: Sat Feb 29, 2020 7:35 pm
by Vaquero
Looks good to me Al.
Nice Cuff.
RP
Re: Ringin Steel and 41 Bowlin
Posted: Sat Feb 29, 2020 7:37 pm
by RanchRoper
That target is a keeper for sure. Nice shootin'. Looks like a strike to me on the pin.
Yes the cuff looks great.
Re: Ringin Steel and 41 Bowlin
Posted: Sat Feb 29, 2020 7:38 pm
by BigAl52
Thanks guy in Arizona made that up for me. Little pricey but sure do like it
Re: Ringin Steel and 41 Bowlin
Posted: Sat Feb 29, 2020 9:29 pm
by fortyshooter
Great shootin' Al ! That Unique works well in a lot of calibers. Have you tried 2400 in the .41 mag?
That is one shredded bowling pin!
Last several days around here have been cold and windy so hoping to get out next day or so.
Re: Ringin Steel and 41 Bowlin
Posted: Sat Feb 29, 2020 9:49 pm
by Vaquero
Al really that is some fine shootin, I can't even do that good with a scope.
Cheers buddy
RP
Re: Ringin Steel and 41 Bowlin
Posted: Sat Feb 29, 2020 9:51 pm
by BigAl52
Forty I havent tried any for a while but I have used it in some pistol loads. I know it works well in the 41. With the Xtreme bullets pushing them any faster than I am with Unique isnt really necessary for the shooting I do. I do have some Hornady xtp 210gr bullets but Im not hunting with it so those 8 gr Unique loads are good enough for me.