Ive put in some time in the loadingbench this week. Lubed and sized two different bullets 265grain sized to .431 for my Ruger. Both shoots well. 5shot groups.
Bullet 1: Saeco #432 265gr rnfp gc. 14bhn, Vithavouri n110 , federal lpm
Bullet 2: NOE 267gr rnfp tl design 14bhn, Vithavouri n110, federal lpm
IMG_20220711_184849.jpg
Loaded up 50 each of them last couple of days, today I went to the range after work. Perfect weather all by myself.
This is what I use when shooting Magnum, nothing fancy 12" pvcpipe and some old carpet for backsupport, old car mat in rubber with a piece of seatpad protecting knees from cylinderblast when taking support on knees.
IMG_20220712_174028.jpg
This the sightpicture @50 meters
IMG_20220712_174321.jpg
After some sightadjustment this was NOE bullet at 50meters
IMG_20220712_182252.jpg
little off to left on this one
IMG_20220712_183416.jpg
And Saeco at 50meters
IMG_20220712_184057.jpg
IMG_20220712_190608.jpg
And I just needed to stretch out to 100m, to try how the bulletdrop would be and it wasnt so bad but I need to practice some more

I hit the paper atleast.
IMG_20220712_190944.jpg
IMG_20220712_191043.jpg
IMG_20220712_191508.jpg
Conclusion both loads performs well, Noe load has deeper seating, but less charge and more pleasant recoil. Saeco has less seating depth, higher charge and a little snappier recoil. at 431 Saeco seems to perform better but cant really tell without a benchrest its probably me adding the flyers. When trying .432 sizing Noe felt better but cylinder throats cant push .432 bullets through so cant use that bulletsize longterm.