Spring has sprung. Get out and shoot your Henry
Winchester 94AE First Rounds
Winchester 94AE First Rounds
Managed a trip to the range on Friday, to try out my new to me Winchester 94AE in 45 Colt. This rifle is a joy to shoot. So I wanted to share some results and thoughts about it.
The first picture is just what I too to the rage today. The Winchester and my Ruger NM Blackhawk.
The second picture are the two loads tested in the Winchester. The load on the left is a 185 gr. semi wadcutter with 8.8 gr. of Universal. It's a fairly soft shooting load and was very accurate in my Marlin 1894 Cowboy. The load on the right is my go 45 Colt load with a 255 gr MB RNFP bullet powered by 7.2 gr. of Universal. This shoots very well is my Marlin and the Ruger and now my Winchester 94.
Here are my first impressions of the 94AE and my likes and a dislikes. I'll start with my dislikes first:
1. Front sight is very hard to see. Since it's a simple black post my old eye have a hard time focusing on it.
2. The trigger pull seems very heavy. I breaks fairly clean but just heavy.
3. The cross bolt safety is ugly and serves no purpose. My Marlin has one also but it's less noticeable and I've put a rubber o-ring on it that keeps it in the fire position. I'm not sure if that will work on the 94AE.
Now here are the things I like about the 94AE:
1. The angel eject feature works exceedingly well. Unlike typical Winchester actions which throw the spent case over your head, this drops all case at the 4 o'clock position about 3' away from my right foot.
2. The loading and action is butter smooth.
3. Overall fit and finish is excellent.
4. The loading gate operates very easy and the internal finish is perfect. It's not a meat eater like my Rossi was before I did some stone work.
5. It's light and handles quickly like the Rossi.
I am very please with this rifle. Loading rounds into the mag. tube is easier than my Marlin or my Rossi. With the smooth operation of the action, rounds chamber effortlessly. I did have some hesitation with the semi wadcutter loads, but that was strictly due to the bullet shape. My first shots were about 4" high at 25 yds and about 3" left. A quick drift of the rear sight got me on center, but still high. The rear sight was in the first notch position so I left it there while I was getting familiar with the trigger.
After getting comfortable at 25 yds I moved the target back to 40. Below is the last 10 rounds at 40 yards. The 5 shots circled in blue are with the rear sight set in the first notch and aiming at the yellow mark. The shots are about 4" high. The 5 shot group in red is with the sight at the lowest position, again using the yellow aiming point. These are dead on. All of these shots are with my go 255 gr. MB RNFP load.
Overall I'm extremely please with this rifle and can't wait to get it out shooting my steel setup. I plan to contact Winchester on Monday and see if they can I identify when this rifle was made. I know it was made between 1992 when the cross bolt safety first appeared and 2003 when it was replaced by the tang safety. like I said, I really enjoy this rifle and one this is for sure --- it's a keeper.
Paul
The first picture is just what I too to the rage today. The Winchester and my Ruger NM Blackhawk.
The second picture are the two loads tested in the Winchester. The load on the left is a 185 gr. semi wadcutter with 8.8 gr. of Universal. It's a fairly soft shooting load and was very accurate in my Marlin 1894 Cowboy. The load on the right is my go 45 Colt load with a 255 gr MB RNFP bullet powered by 7.2 gr. of Universal. This shoots very well is my Marlin and the Ruger and now my Winchester 94.
Here are my first impressions of the 94AE and my likes and a dislikes. I'll start with my dislikes first:
1. Front sight is very hard to see. Since it's a simple black post my old eye have a hard time focusing on it.
2. The trigger pull seems very heavy. I breaks fairly clean but just heavy.
3. The cross bolt safety is ugly and serves no purpose. My Marlin has one also but it's less noticeable and I've put a rubber o-ring on it that keeps it in the fire position. I'm not sure if that will work on the 94AE.
Now here are the things I like about the 94AE:
1. The angel eject feature works exceedingly well. Unlike typical Winchester actions which throw the spent case over your head, this drops all case at the 4 o'clock position about 3' away from my right foot.
2. The loading and action is butter smooth.
3. Overall fit and finish is excellent.
4. The loading gate operates very easy and the internal finish is perfect. It's not a meat eater like my Rossi was before I did some stone work.
5. It's light and handles quickly like the Rossi.
I am very please with this rifle. Loading rounds into the mag. tube is easier than my Marlin or my Rossi. With the smooth operation of the action, rounds chamber effortlessly. I did have some hesitation with the semi wadcutter loads, but that was strictly due to the bullet shape. My first shots were about 4" high at 25 yds and about 3" left. A quick drift of the rear sight got me on center, but still high. The rear sight was in the first notch position so I left it there while I was getting familiar with the trigger.
After getting comfortable at 25 yds I moved the target back to 40. Below is the last 10 rounds at 40 yards. The 5 shots circled in blue are with the rear sight set in the first notch and aiming at the yellow mark. The shots are about 4" high. The 5 shot group in red is with the sight at the lowest position, again using the yellow aiming point. These are dead on. All of these shots are with my go 255 gr. MB RNFP load.
Overall I'm extremely please with this rifle and can't wait to get it out shooting my steel setup. I plan to contact Winchester on Monday and see if they can I identify when this rifle was made. I know it was made between 1992 when the cross bolt safety first appeared and 2003 when it was replaced by the tang safety. like I said, I really enjoy this rifle and one this is for sure --- it's a keeper.
Paul
5 x
Re: Winchester 94AE First Rounds
I always liked the Winchesters but I never liked the sloppy trigger travel they have. Nice shooting Paul.
1 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
- BrokenolMarine
- Ranch Foreman
- Posts: 5770
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
Re: Winchester 94AE First Rounds
Good deal. Glad it's a keeper. I have bought several guns over the years that weren't, at least for me. If I don't shoot them well, I don't keep them around.
2 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
- fortyshooter
- Ranch Foreman
- Posts: 6270
- Joined: Sat Dec 09, 2017 10:37 am
- Location: Va.
Re: Winchester 94AE First Rounds
Nice .45 combo to take shootin' Paul! Looks like the 94 shoots very well too. Wonder if you can get the brass bead type front sight for it?
1 x
- Vaquero
- Ranch Boss
- Posts: 10255
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: Winchester 94AE First Rounds
Nice input, and sounds to be a good one for the most part. Some good shooting there.
Enjoyed reading the good and bad.
I have an early AE, but mine is a 30-30.
Like you I also have a Rossi and Marlin in 45 colt, I choose the Rossi more often.
Now you can do a side by side by side at some point.
RP
Enjoyed reading the good and bad.
I have an early AE, but mine is a 30-30.
Like you I also have a Rossi and Marlin in 45 colt, I choose the Rossi more often.
Now you can do a side by side by side at some point.
RP
1 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19269
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: Winchester 94AE First Rounds
really enjoyed your review .... first time I've heard one on a 45 cal model 94
0 x
Re: Winchester 94AE First Rounds
Very good information and photos. One ? What grips are on the Ruger? I have one just like it except I had a Suprer Blackhawk low spur hammer put on it and white outline red insert sites. I have big mitts so always need oversized handgun grips.
0 x
- RanchRoper
- Forum Ambassador
- Posts: 12681
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta
Re: Winchester 94AE First Rounds
Nice job. I handled a Winchester '94 carbine with the big John Wayne large loop lever on it a couple of weeks ago at the LGS. In 45 Colt too. That little rifle almost came home with me.
3 x
1860 Colt SA Richards Conversion Revolver .45C
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
- North Country Gal
- Firearms Advisor
- Posts: 6054
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin
Re: Winchester 94AE First Rounds
Despite the safety that is a fine looking lever gun. You do it justice with that shooting. Looks like a keeper, especially with that 45 Colt chambering.
0 x