Guess who just had a birthday? We did. Henry Rifle Forums has made it to the 10 year mark. Thank you to all members, I'm glad you are here!
Put your range reports for all brands and types of firearms and other items.
-
Rifletom
- Deputy Marshal
- Posts: 4000
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory
Post
by Rifletom » Sat Jan 15, 2022 3:00 pm
fortyshooter wrote: ↑Sat Jan 15, 2022 10:22 am
BigAl52 wrote: ↑Sat Jan 15, 2022 9:07 am
fortyshooter wrote: ↑Fri Jan 14, 2022 7:43 pm
Think the big part of it was the bullet that the bore liked. The MB 200 bullets just like to scatter a bit in this particular rifle.
Agree on the right bullet but the right bullet also needs the right powder charge. I suggested that load because it has worked well for myself with quite a few bullets in 44 mag when I was experimenting in the past. I also like xtreme bullets they shoot well in all of my guns. I use them more than I do lead cast anymore. Have fun with the 73 there great rifles.
I agree Al. I went back thru my reloading notes and I have used 9 gr. Unique with good results in 45 Colt and 44 Mag.
Looks like this rifle shines with a 200 gr. bullet for low level 44 Magnum plinking. Looking at the MB and Xtreme bullet with same 6 gr. Red Dot load the MB bullet doesn't want to settle down wandering a bit. It does shoot much better in the revolver though.
Your last sentence is why we handloaders get gray hair so fast. Works in one gun, but, not in another! What the.....!?
And continue on we do.
-
Vaquero
- Ranch Boss
- Posts: 12039
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Post
by Vaquero » Sat Jan 15, 2022 5:19 pm
Looks good as usual, is the MB smaller or larger?
Or ya think it's the coating?
Liking that red dot more all the time.
9.0 grs works well in both the 45 colt rifles over here.
I don't why but my 44 bbb is the lest shot of all the pistol calibers I own,
and was the second I purchased.
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
-
fortyshooter
- Ranch Foreman
- Posts: 7044
- Joined: Sat Dec 09, 2017 10:37 am
- Location: Va.
Post
by fortyshooter » Sat Jan 15, 2022 8:25 pm
Well both bullets mic at .430 The MB is supposed to be a 12 Bhn hardness the Cowboy load bullet and the Xtreme are quoted as a 18 Bhn.
The MB bullet has a slicker feel to it than the plated Xtreme but less surface area to contact the rifling due to the lube groove.
-
Vaquero
- Ranch Boss
- Posts: 12039
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Post
by Vaquero » Sat Jan 15, 2022 10:50 pm
Are they similar in design, RN, FN, RFN?
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
-
Vaquero
- Ranch Boss
- Posts: 12039
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Post
by Vaquero » Sat Jan 15, 2022 10:53 pm
I bought 500 of the MB 240 smashers a while back but haven't spent any time with them.
But hey, I have 'em.
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
-
fortyshooter
- Ranch Foreman
- Posts: 7044
- Joined: Sat Dec 09, 2017 10:37 am
- Location: Va.
Post
by fortyshooter » Sun Jan 16, 2022 11:27 am
Vaquero wrote: ↑Sat Jan 15, 2022 10:50 pm
Are they similar in design, RN, FN, RFN?
RP
Same profile but the Xtreme has more surface to engage rifling if that makes a difference. It would raise pressure just a bit.
-
Attachments
-
- Xtreme plated and Missouri Bullets cast coated 200 gr 44 bullets..jpg (90.19 KiB) Viewed 803 times
-
RanchRoper
- Forum Ambassador
- Posts: 12943
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta
Post
by RanchRoper » Sat Jan 22, 2022 8:58 pm
I'd say that's some pretty darn good shootin'.
Pedersoli Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
