Page 1 of 1
New BB brass in 357, new member
Posted: Tue May 29, 2018 12:13 am
by greenlaser
Thought I would say hello here. My brother gave me a brass 357 carbine for my 62 birthday. It's my first ever lever gun and I'm still learning to shoot it.
He bought a 41 Mag carbine to match his S&W pistol so I got him a fancy wood stock upgrade. It's been a Henry kind of year around here. Guess I'm going to get some skinner sights for us. I've looked at many kinds of sights and tried a scope but Skinner sights seem to best fit the gun. Any pros or cons?
I's finally warming up here in central Montana so I've been doing more shooting. We had lots of practice last weekend until my brother blasted the chronograph (he used his 92FS). I kept the front plate as a souvenir. He bucked up and bought us a new one. It was a good day.
Re: New BB brass in 357, new member
Posted: Tue May 29, 2018 8:14 am
by JEBar
welcome indeed .... thanks for adding your Henry to our community's total .... don't be too tough on your brother, shooting a Chrony can happen to anyone ..

.. trust me on that one .... our Henry 357 is one of our favorites, you'll find a good deal of info on them here
Re: New BB brass in 357, new member
Posted: Tue May 29, 2018 8:26 am
by PT7
~Welcome~.jpg
Greetings from the Show-Me-State, Greenlaser!
What a special 62nd birthday gift....a .357 Magnum Henry Carbine. Congrats!! I just got the .357 BBS Carbine this month myself. I've found mine is a real straight-shooter, and very easy to handle. It's also quite "easy-on-the-eyes."

I'm positive you will enjoy yours. BTW, I've put a receiver-mounted Skinner Express on my Carbine, and it works well for me.
As JEBar noted, there is quite a lot of info on this caliber Henry rifle posted on our Forum. Just search for them and you'll have some good reads ahead!
PT7
greenlaser wrote:Thought I would say hello here. My brother gave me a brass 357 carbine for my 62 birthday. It's my first ever lever gun and I'm still learning to shoot it.
He bought a 41 Mag carbine to match his S&W pistol so I got him a fancy wood stock upgrade. It's been a Henry kind of year around here. Guess I'm going to get some skinner sights for us. I've looked at many kinds of sights and tried a scope but Skinner sights seem to best fit the gun. Any pros or cons?
I's finally warming up here in central Montana so I've been doing more shooting. We had lots of practice last weekend until my brother blasted the chronograph (he used his 92FS). I kept the front plate as a souvenir. He bucked up and bought us a new one. It was a good day.
Re: New BB brass in 357, new member
Posted: Tue May 29, 2018 8:44 am
by CT_Shooter
Congratulations on your first Henry. That's a great rifle and I'm sure you're going to enjoy it. I put a Skinner Express on my own BBB .357 and it is a perfect match. Welcome to the forum.
Re: New BB brass in 357, new member
Posted: Tue May 29, 2018 9:18 am
by Mistered
Any pros or cons?
The Skinner appears to be a good sight but don't rule out a Williams 336 for it. Considerably less money.
IMG_0954[1].JPG
Re: New BB brass in 357, new member
Posted: Tue May 29, 2018 9:42 am
by BigAl52
Welcome to the forum. Nice gift from a brother for sure. Tell you brother about the forum also if you havent already.
Re: New BB brass in 357, new member
Posted: Tue May 29, 2018 1:10 pm
by The Wiz
Welcome!
Re: New BB brass in 357, new member
Posted: Tue May 29, 2018 2:04 pm
by Ojaileveraction
Mistered wrote:Any pros or cons?
The Skinner appears to be a good sight but don't rule out a Williams 336 for it. Considerably less money.
IMG_0954[1].JPG
That is a Williams WGRS sight
The Williams 336 requires significant modification to fit the Brass Big Boy.
Re: New BB brass in 357, new member
Posted: Tue May 29, 2018 4:51 pm
by Shakey Jake
Two things: 1) you got a hellava' brother and 2) contrats on the rifle.
Re: New BB brass in 357, new member
Posted: Wed May 30, 2018 3:00 am
by greenlaser
Thanks for the congrats guys. There is a lot of good reading on this site and I have been busy reading.
I am really interested interested in the Williams FP-336. None of these manufacturers give dimensions I need. Will this fit.
The last two holes on the scope base are 1/2 inch apart. Has anyone used this sight on H006. I would probably put on a globe front sight too. Yah he's one hellava bro. i'll try and post a pic of his fancy wood i got from Henry. It's nice.
Re: New BB brass in 357, new member
Posted: Wed May 30, 2018 6:45 pm
by Ojaileveraction
greenlaser wrote:I am really interested interested in the Williams FP-336. None of these manufacturers give dimensions I need. Will this fit.
The last two holes on the scope base are 1/2 inch apart. Has anyone used this sight on H006..
I mounted a Williams 336 FP/tk on my BBB. I had to remove several .001 inches of metal off the elevator so it could fit.
If you use the two existing holes to mount the sight it will annoyingly hang over the hammer. I used only the forward screw and locktite.
Here a Thread.
http://henryrifleforums.com/viewtopic.php?f=32&t=2844
Re: New BB brass in 357, new member
Posted: Sat Jun 02, 2018 8:41 pm
by Hitman
Welcome to the forum from Grassy Creek North Carolina.
Re: New BB brass in 357, new member
Posted: Sat Jun 02, 2018 8:56 pm
by RanchRoper
Welcome from Alberta.