Spring has sprung. Get out and shoot your Henry
Info on a few of my muzzleloaders
Info on a few of my muzzleloaders
I started to shoot muzzleloaders competitively In 1977. I always liked the few Penn. long rifles I saw at shoots but they were all custom built. I could not afford one so I found a local gun shop that sold all the parts. I bought all the parts I needed and built my first long rifle. It took about 6 months to finish and when I took it to show it off where I bought all the parts the owner sent me home with parts to build one for his store. That is what started it all.
The last rifle is the only percussion That I have. It was built only to use on bad weather days, mainly rainy days. It has not seen much action in all these years, maybe a 100 rounds put through it. The carving isn't world class but what can I say.
Oh ya the first rifle that got it all started, I have always bought the best parts I could at the time. Chambers and L&R locks and Davis set triggers, best wood I could find. Wow this is more typing than I have done in quite some time. If you have any questions I will do my best to answer them.
Jim
All 3 rifles were made from a Planck and similar parts. They are all done in an early Lancaster style.(1770-1780) The first is a 54 cal. and is the last one I built about 3 years ago. It is stained using nitric acid. It has some carving on it and has 1/4" cast off in the stock. The next 2 were built in the early 80's. The second one has been all over the east and as far west as Kentucky at shoots with the NYS flintlock team. I have taken a number of deer with this rifle also. The last rifle is the only percussion That I have. It was built only to use on bad weather days, mainly rainy days. It has not seen much action in all these years, maybe a 100 rounds put through it. The carving isn't world class but what can I say.
Oh ya the first rifle that got it all started, I have always bought the best parts I could at the time. Chambers and L&R locks and Davis set triggers, best wood I could find. Wow this is more typing than I have done in quite some time. If you have any questions I will do my best to answer them.
Jim
9 x
Henry BBB 44mag
Henry 1860
Henry 45/70 Brass
Henry 1860
Henry 45/70 Brass
- North Country Gal
- Firearms Advisor
- Posts: 6162
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin
Re: Info on a few of my muzzleloaders
I'm in awe at the beauty of these guns and the craftsmanship involved. You have a gift, you truly do.
I assume these are the real deal, black powder, only, no substitute stuff. Round ball, too, or do you shoot conicals in the big 54?
I've dabbled a bit with some percussion guns, via TC and Pedersoli, but it got to be such a chore to find real blackpowder that I went with the substitutes. Finally sold them off, but there are times I wish I had stayed with it. Most gun shops won't even take those factory percussion guns in on trade, anymore. Of course, your guns are in a whole different league.
Also shot a 209x50 TC Encore for a time and, have to laugh when anyone calls one of those rigs a "primitive" weapon. The only thing they have in common with traditional MLs is that you load them from the muzzle. Primitive, they are definitely not. It's what everyone uses, up here, during blackpowder deer season, though.
Thank you so much for sharing.
I assume these are the real deal, black powder, only, no substitute stuff. Round ball, too, or do you shoot conicals in the big 54?
I've dabbled a bit with some percussion guns, via TC and Pedersoli, but it got to be such a chore to find real blackpowder that I went with the substitutes. Finally sold them off, but there are times I wish I had stayed with it. Most gun shops won't even take those factory percussion guns in on trade, anymore. Of course, your guns are in a whole different league.
Also shot a 209x50 TC Encore for a time and, have to laugh when anyone calls one of those rigs a "primitive" weapon. The only thing they have in common with traditional MLs is that you load them from the muzzle. Primitive, they are definitely not. It's what everyone uses, up here, during blackpowder deer season, though.
Thank you so much for sharing.
0 x
- CT_Shooter
- Administrator emeritus
- Posts: 5163
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut
Re: Info on a few of my muzzleloaders
X2... Beautiful work. Thanks for sharing it with us.North Country Gal wrote:I'm in awe at the beauty of these guns and the craftsmanship involved. You have a gift, you truly do.
Thank you so much for sharing.
0 x
H006M Big Boy Brass .357 - H001 Classic .22LR - Uberti / Taylors & Co. SmokeWagon .357 5.5" - Uberti / Taylors & Co. RanchHand .22LR 5.5"
Re: Info on a few of my muzzleloaders
Ya they are black powder only. The sub. stuff won't light up a flintlock. I only use round balls but did have an Enfield 3 band musket for a short time. I used conicals in that. It used too much lead and wasn't my thing. I buy my black powder by the case.
Thank you for you nice comments, I do appreciate it.
Jim
Thank you for you nice comments, I do appreciate it.
Jim
1 x
Henry BBB 44mag
Henry 1860
Henry 45/70 Brass
Henry 1860
Henry 45/70 Brass
- tx gunrunner
- Firearms Advisor
- Posts: 888
- Joined: Tue Apr 05, 2016 8:33 pm
- Location: near Ft Hood Tx
- RanchRoper
- Forum Ambassador
- Posts: 12702
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta
Re: Info on a few of my muzzleloaders
Museum quality works of art. Thank you for sharing your talent with us. Those are truly heirlooms.
0 x
1860 Colt SA Richards Conversion Revolver .45C
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
Re: Info on a few of my muzzleloaders
The first thing most everyone notices in your photos is the beautiful wood, and the carving that has been done with it. So I ditto the comments/compliments already given.
I admit I don't know what constitutes "world-class" as may be reflected in your rifle builds, but I bet these would hold up well in most "build & show" competitions. Just the fact that you, the owner, built them puts them in a special class. Appreciated your post and all the cool-looking rifles you displayed.
I admit I don't know what constitutes "world-class" as may be reflected in your rifle builds, but I bet these would hold up well in most "build & show" competitions. Just the fact that you, the owner, built them puts them in a special class. Appreciated your post and all the cool-looking rifles you displayed.
mlrifleNY wrote:All 3 rifles were made from a Planck and similar parts. They are all done in an early Lancaster style.(1770-1780) The first is a 54 cal. and is the last one I built about 3 years ago. It is stained using nitric acid. It has some carving on it and has 1/4" cast off in the stock. The next 2 were built in the early 80's. The second one has been all over the east and as far west as Kentucky at shoots with the NYS flintlock team. I have taken a number of deer with this rifle also.
The carving isn't world class but what can I say.
Jim
1 x
~Пока~
Re: Info on a few of my muzzleloaders
Thanks again to all of you and I like your rifle tx gunrunner. I think there is something special about shooting something you built with your own hands.
Jim
Jim
2 x
Henry BBB 44mag
Henry 1860
Henry 45/70 Brass
Henry 1860
Henry 45/70 Brass
Re: Info on a few of my muzzleloaders
Jim
Im glad you shared those with us as I to am a blackpowder nut. I have a few more percussion than flint but I like both. I have a couple of GRRW rifles in percussion and I am a member of the collectors association. The only 2 flinters I have are a pedersoli dixe version od the pennslvania rifle and a Lyman GPR 54 caliber that I had Jack Brooks in Denver install an L&R lock and some Davis triggers in. Ive wanted a flint Penn or Lancaster long rifle but I cant seem to get by the love for Hawkens and when a nice one comes along I ususally end up with it. I have a 40 cal Hawken Squirrel rifle that John Bergmann built thats a favorite to take to the shooting range. Your rifles look to be first class and are very nice. I wish I had your talent. Al
Im glad you shared those with us as I to am a blackpowder nut. I have a few more percussion than flint but I like both. I have a couple of GRRW rifles in percussion and I am a member of the collectors association. The only 2 flinters I have are a pedersoli dixe version od the pennslvania rifle and a Lyman GPR 54 caliber that I had Jack Brooks in Denver install an L&R lock and some Davis triggers in. Ive wanted a flint Penn or Lancaster long rifle but I cant seem to get by the love for Hawkens and when a nice one comes along I ususally end up with it. I have a 40 cal Hawken Squirrel rifle that John Bergmann built thats a favorite to take to the shooting range. Your rifles look to be first class and are very nice. I wish I had your talent. Al
2 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
Re: Info on a few of my muzzleloaders
Thanks BigAl. I went the other way. I love a full stock Penn. rifle. I have had a few Hawken style rifles but just never could bond with them. I did take my biggest Buck with a GPR 54 in perc. That was a great rifle, just not my style.
2 x
Henry BBB 44mag
Henry 1860
Henry 45/70 Brass
Henry 1860
Henry 45/70 Brass