Spring has sprung. Get out and shoot your Henry
Let's get the lead out men
-
- Cowhand
- Posts: 437
- Joined: Thu Jul 02, 2020 5:16 am
- Location: N.E. Ohio
Let's get the lead out men
Ok, for starters, I ain't doing the search thing. I'm to lazy for that which is why I ask, if anybody has come up with the magic to remove lead from a bore. I mainly shoot cast bullets and up until I bought a good bore scope did I discover that my bores are not completely free of lead. I think I have tried just about everything in my past 50 some years of cleaning rifles and pistols but I have not found anything to make that chore easier. I am here to pick your brains.
0 x
Army Paratrooper
173 rd Airborne Brigade, 2nd/503 rd. Airborne Infantry, Vietnam 66-67, point man, tunnel rat
combat jump 2/67
82 nd Airborne Div. 1st/505th Airborne Infantry, Vietnam, 68, Sniper
jumped with the Army Parachute Team, The Golden Knights.
173 rd Airborne Brigade, 2nd/503 rd. Airborne Infantry, Vietnam 66-67, point man, tunnel rat
combat jump 2/67
82 nd Airborne Div. 1st/505th Airborne Infantry, Vietnam, 68, Sniper
jumped with the Army Parachute Team, The Golden Knights.
Re: Let's get the lead out men
I use a couple of different methods. First is get some chore girl at Walgreens. Make sure is the copper one. I destrand it and wrap it around an old copper brush. That works like a cheap Lewis lead remover. I also us some Kroil with it. Second good old lead cloth will get alot of it out. Lastly I dont shoot much lead anymore. Copper plated are as cheap as lead and I dont do all of the above.
1 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
- RanchRoper
- Forum Ambassador
- Posts: 12681
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta
Re: Let's get the lead out men
I only shoot lead. Hoppes, bore mop, copper bore brush, and patches keep mine clean.
1 x
1860 Colt SA Richards Conversion Revolver .45C
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
1860 Henry .45C
1885 High Wall .45C
1820-1840 Frontier Percussion .50
1790-1820 Frontier Flintlock .50
Ohkínohkomit - Shoot skillfully
- markiver54
- Deputy Marshal
- Posts: 10281
- Joined: Sun Nov 04, 2018 11:49 am
- Location: Biue Ridge Mountains, NC
Re: Let's get the lead out men
I don't shoot nearly as much as most on here. Nor do I own a bore scope, just a bore light.
When I clean, using whatever, be it #9, Ballistol etc., I soak the barrel and let it sit over nite before proceeding the following day.
As far as I can tell, my bores look shiny and clean.
As I said though; I don't shoot a lot at one time.maybe 50 rounds give or take through each gun. I don't even clean them after every outing.
When I clean, using whatever, be it #9, Ballistol etc., I soak the barrel and let it sit over nite before proceeding the following day.
As far as I can tell, my bores look shiny and clean.
As I said though; I don't shoot a lot at one time.maybe 50 rounds give or take through each gun. I don't even clean them after every outing.
1 x
I'm your Huckleberry
-
- Cattle Driver
- Posts: 882
- Joined: Sun Dec 11, 2016 10:48 pm
- Location: Spokane WA
Re: Let's get the lead out men
How does the bore machining look? If rough, fire lap the gun, followed by a good polish with Bore Butter. That will really reduce any leading and also make it much easier to clean.
https://www.beartoothbullets.com/bulle ... g_kits.htm
This is a real PITA to do, but the results are worth it if your barrel isn’t great to start with.
John Davies
Spokane WA
https://www.beartoothbullets.com/bulle ... g_kits.htm
This is a real PITA to do, but the results are worth it if your barrel isn’t great to start with.
John Davies
Spokane WA
2 x
- Rifletom
- Deputy Marshal
- Posts: 3898
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory
Re: Let's get the lead out men
Dang, a lost post. I'll try this again. 50/50 mix of Hoppes#9 and Kroil. If something is really nasty, "Wipe-out, Patch-out" works well. Let's see if this one gets thru.
0 x
-
- Cowhand
- Posts: 437
- Joined: Thu Jul 02, 2020 5:16 am
- Location: N.E. Ohio
Re: Let's get the lead out men
Yep partner, that one got through. Thank you.
I use the 50/50 mix of Hoppe's and kroil myself and even let it sit in the bore overnight. Still seems like a slow process no matter what, even after I run my Chor Boy wrapped on an old bore brush. I read somewhere about the Wipe out but have been trying to find out more about it and where to buy it just in case I read that it is just that good.
0 x
Army Paratrooper
173 rd Airborne Brigade, 2nd/503 rd. Airborne Infantry, Vietnam 66-67, point man, tunnel rat
combat jump 2/67
82 nd Airborne Div. 1st/505th Airborne Infantry, Vietnam, 68, Sniper
jumped with the Army Parachute Team, The Golden Knights.
173 rd Airborne Brigade, 2nd/503 rd. Airborne Infantry, Vietnam 66-67, point man, tunnel rat
combat jump 2/67
82 nd Airborne Div. 1st/505th Airborne Infantry, Vietnam, 68, Sniper
jumped with the Army Parachute Team, The Golden Knights.
-
- Cowhand
- Posts: 437
- Joined: Thu Jul 02, 2020 5:16 am
- Location: N.E. Ohio
Re: Let's get the lead out men
Thanks for the link but I think I am just to lazy to go through all that.John E Davies wrote: ↑Mon Aug 03, 2020 10:55 amHow does the bore machining look? If rough, fire lap the gun, followed by a good polish with Bore Butter. That will really reduce any leading and also make it much easier to clean.
https://www.beartoothbullets.com/bulle ... g_kits.htm
This is a real PITA to do, but the results are worth it if your barrel isn’t great to start with.
John Davies
Spokane WA
1 x
Army Paratrooper
173 rd Airborne Brigade, 2nd/503 rd. Airborne Infantry, Vietnam 66-67, point man, tunnel rat
combat jump 2/67
82 nd Airborne Div. 1st/505th Airborne Infantry, Vietnam, 68, Sniper
jumped with the Army Parachute Team, The Golden Knights.
173 rd Airborne Brigade, 2nd/503 rd. Airborne Infantry, Vietnam 66-67, point man, tunnel rat
combat jump 2/67
82 nd Airborne Div. 1st/505th Airborne Infantry, Vietnam, 68, Sniper
jumped with the Army Parachute Team, The Golden Knights.
-
- Cowhand
- Posts: 437
- Joined: Thu Jul 02, 2020 5:16 am
- Location: N.E. Ohio
Re: Let's get the lead out men
No doubt. I learned a long time ago that any solution doesn't work very well unless you let it sit in the bore so it can do it's job. Rushing it, just doesn't work but lead is a tough one to attack. My bore light shows an extremely clean and shiny bore but the bore scope shows something completely different.markiver54 wrote: ↑Mon Aug 03, 2020 10:49 amI don't shoot nearly as much as most on here. Nor do I own a bore scope, just a bore light.
When I clean, using whatever, be it #9, Ballistol etc., I soak the barrel and let it sit over nite before proceeding the following day.
As far as I can tell, my bores look shiny and clean.
As I said though; I don't shoot a lot at one time.maybe 50 rounds give or take through each gun. I don't even clean them after every outing.
0 x
Army Paratrooper
173 rd Airborne Brigade, 2nd/503 rd. Airborne Infantry, Vietnam 66-67, point man, tunnel rat
combat jump 2/67
82 nd Airborne Div. 1st/505th Airborne Infantry, Vietnam, 68, Sniper
jumped with the Army Parachute Team, The Golden Knights.
173 rd Airborne Brigade, 2nd/503 rd. Airborne Infantry, Vietnam 66-67, point man, tunnel rat
combat jump 2/67
82 nd Airborne Div. 1st/505th Airborne Infantry, Vietnam, 68, Sniper
jumped with the Army Parachute Team, The Golden Knights.
- markiver54
- Deputy Marshal
- Posts: 10281
- Joined: Sun Nov 04, 2018 11:49 am
- Location: Biue Ridge Mountains, NC
Re: Let's get the lead out men
As long as I still see shiny lands and grooves, and patches come out clean, and I have good accuracy, then I'm not gonna worry about it.
2 x
I'm your Huckleberry