Spring has sprung. Get out and shoot your Henry
Rings height for 30mm scope 3 - 9 X 40 Henry single shot
-
- Tenderfoot
- Posts: 19
- Joined: Tue Aug 04, 2020 11:03 pm
Rings height for 30mm scope 3 - 9 X 40 Henry single shot
Please recommend what height of rings be good as need to pull back the hammer too..thanks
0 x
-
- Cowhand
- Posts: 255
- Joined: Wed Nov 13, 2019 8:52 pm
Re: Rings height for 30mm scope 3 - 9 X 40 Henry single shot
May be hard to say - and it’s probably not a whole lot of help - but this photo is medium rings and a 1” scope. Clearance between the hammer, power ring and focus ring is really close. I actually had to move it a bit the first time I took it to the range the range because the hammer was contacting the power ring causing light primer strikes. Once adjusted no more light primer strikes. Not sure how high rings for 30mm scopes set a scope off a rifle - i’ve never mounted a 30mm scope. You may start with medium and if they are too low take them back to the store and see if they will take an exchange.
Again - probably not much help.
Again - probably not much help.
You do not have the required permissions to view the files attached to this post.
0 x
Re: Rings height for 30mm scope 3 - 9 X 40 Henry single shot
Had same issue with my single shot. Also 1"scope with medium height rings. Increased gap in hammer extender and scope with a dremel, some cold blue and problem was solved.
0 x
- Shakey Jake
- Drover
- Posts: 4346
- Joined: Wed Aug 16, 2017 11:10 am
- Location: Sugar Land, TX
- Contact:
Re: Rings height for 30mm scope 3 - 9 X 40 Henry single shot
Usually Igo to the Warne web site. They have drop down menus to determine the correct rings
Jake
Jake
0 x