Spring has sprung. Get out and shoot your Henry
sight pusher
sight pusher
S&W mp2.0 .40 cal still shooting left after moving rear sight far right. I gambled on an inexpensive pusher made by Washington gun works and available on Amazon. I have to say the setup was a little tedious for old hands, but this thing worked very well if you follow the directions to the letter. Rapped the holding blocks in rubber tape and oiled the dovetail and pusher threads as instructed and it worked well. Will shoot it tomorrow and see if it was enough.
1 x
-
Sir Henry
- Administrator / Owner
- Posts: 12118
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: Price County Wisconsin
Re: sight pusher
Good luck. Let us know how you did.PJM wrote: ↑Fri Oct 07, 2022 5:28 pmS&W mp2.0 .40 cal still shooting left after moving rear sight far right. I gambled on an inexpensive pusher made by Washington gun works and available on Amazon. I have to say the setup was a little tedious for old hands, but this thing worked very well if you follow the directions to the letter. Rapped the holding blocks in rubber tape and oiled the dovetail and pusher threads as instructed and it worked well. Will shoot it tomorrow and see if it was enough.
0 x
Hi, my name is Gene and I'm a Henryholic from Wisconsin.
Range Reporter: Henry Repeater
Range Reporter: Henry Repeater
-
markiver54
- Deputy Marshal
- Posts: 10305
- Joined: Sun Nov 04, 2018 11:49 am
- Location: Biue Ridge Mountains, NC
Re: sight pusher
Do you have a pic of the sight pusher or a link?PJM wrote: ↑Fri Oct 07, 2022 5:28 pmS&W mp2.0 .40 cal still shooting left after moving rear sight far right. I gambled on an inexpensive pusher made by Washington gun works and available on Amazon. I have to say the setup was a little tedious for old hands, but this thing worked very well if you follow the directions to the letter. Rapped the holding blocks in rubber tape and oiled the dovetail and pusher threads as instructed and it worked well. Will shoot it tomorrow and see if it was enough.
0 x
I'm your Huckleberry
Re: sight pusher
just click on amazon and type in sight pusher in the search bar.its nice as it has pictures for front and back sight adjustment.
0 x
Re: sight pusher
I just checked Amazon and they are out of mine made of 4340 steel. there are cheaper ones made of t-6 aluminum but not sure of quality. I will send photo.
You do not have the required permissions to view the files attached to this post.
1 x
-
Vaquero
- Ranch Boss
- Posts: 10320
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: sight pusher
I like this one, it's spring loaded.
Set the brass end on sight, then pull the other out and let go.
Works well, have used it several times.
RP
Set the brass end on sight, then pull the other out and let go.
Works well, have used it several times.
RP
You do not have the required permissions to view the files attached to this post.
2 x
Monte Walsh "You have No idea how little I care". 
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Re: sight pusher
I have a Wyoming sight drifter also. It works pretty well, just takes some trial and error to get used to it.
1 x
Re: sight pusher
.
Here is mine.
Here is mine.
You do not have the required permissions to view the files attached to this post.
3 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234