The aperture stem is threaded through, and is symmetric front to rear. So to adjust the sight you can remove the aperture (peep), rotate the stem one half turn, and replace the aperture in the stem. So the minimum adjustment is one half turn, or 1/80th of an inch.gdc2506 wrote: ↑Tue Feb 16, 2021 5:44 pmokay, somebody "learn me sompin'"... I just got a H001TM with a skinner sight. I've not even pulled the trigger yet, and I've never seen a skinner sight.
I was looking at the sight and I was under the impression that full rotations of the sight was the limit of the adjustment. What am I missing?
Spring has sprung. Get out and shoot your Henry
Question on Skinner sight adjustment
-
- Tenderfoot
- Posts: 12
- Joined: Sat May 18, 2019 8:16 pm
- Location: Indiana
Re: Question on Skinner sight adjustment
1 x
Henry Long Ranger 6.5 Creedmoor
Support the Second Amendment Foundation!
Support the Second Amendment Foundation!