Spring has sprung. Get out and shoot your Henry

minimalist base(s)/rings please help

Post Reply
User avatar
Cleveraction
Wrangler
Posts: 61
Joined: Sun Jan 03, 2021 11:43 pm
Location: Hill Country, TX
United States of America

minimalist base(s)/rings please help

Post by Cleveraction » Thu Jan 07, 2021 7:37 pm

OK, I admit, the true minimalist would be iron sights. However, I am putting a scope on my new H009g and am starting to confuse myself. The scope has a 30mm tube and I got matched weaver style rings and the weaver 63b bases (and whatever come in the Henry Box). I don't really like the bolts that tighten the rings to the base. I have been looking at Skinner, but they still require the rings be added and at Warne, if you get the kind with no bolt near the bottom, you get an addition connection at the top. I am not interested in QD style connections

I would really like a base that has the bottom 1/2 of the ring integrated into it. Any tips on this, or mounting in general, or the least obtrusive way to connect everything? Attached is a pic of my Rem 700 set up which is kind of what I am aiming for; though if I am being objective this might not be any less obtrusive, but is just what I am used to looking at! Oh, any rings with see though bottoms (or do you know what the clearance has to be) if I want to be able to see the buckhorn sights at a glance w/o the Skinner? Anything else I should be considering?

Thanks in advance!
Attachments
m3.jpg
m3.jpg (117.31 KiB) Viewed 1265 times
0 x
Conservation is a state of harmony between men and land.
~Aldo Leopold

User avatar
Cleveraction
Wrangler
Posts: 61
Joined: Sun Jan 03, 2021 11:43 pm
Location: Hill Country, TX
United States of America

Re: minimalist base(s)/rings please help

Post by Cleveraction » Fri Jan 08, 2021 7:02 am

Came across Talley and Conetrol Rings, they seem to make what I am trying for but the amount of steel involved the seem a little pricey (well to me anyway). But heck, good ideas have value so pay up or find something else I suppose.
1 x
Conservation is a state of harmony between men and land.
~Aldo Leopold

Yornoc3
Cattle Driver
Posts: 537
Joined: Sun Apr 30, 2017 4:48 pm
United States of America

Re: minimalist base(s)/rings please help

Post by Yornoc3 » Fri Jan 08, 2021 12:09 pm

if you're talking a more "permanent" type mount, Talley makes an ultralight ring with an integral base that I've used on my Tikka T3 and T1. They're alloy, light, and about as minimalist as you can get. I assume Talley makes them for Marlin and Henry receivers. There's no detaching the scope unless you want to sight in the rifle again, though.
0 x

User avatar
Sir Henry
Administrator / Owner
Posts: 12052
Joined: Sun Mar 20, 2016 10:58 pm
Location: Price County Wisconsin
United States of America

Re: minimalist base(s)/rings please help

Post by Sir Henry » Fri Jan 08, 2021 1:21 pm

Have you tried Leupold?
38159969-33E8-4579-A62F-1DBAE22B4931.jpeg
38159969-33E8-4579-A62F-1DBAE22B4931.jpeg (120.54 KiB) Viewed 1238 times
0 x
Hi, my name is Gene and I'm a Henryholic from Wisconsin.

Range Reporter: Henry Repeater

User avatar
Cleveraction
Wrangler
Posts: 61
Joined: Sun Jan 03, 2021 11:43 pm
Location: Hill Country, TX
United States of America

Re: minimalist base(s)/rings please help

Post by Cleveraction » Fri Jan 08, 2021 9:10 pm

Yes, @yornoc3 the Talley's are what I am looking at, and they are very reasonable at $54 a pair, whereas the Conetrol is closer to $200 when all said and done. @Sir Henry, those look good, but that have the same kind of obtrusive bolt to make the weaver connection. I pick up the gun and the scope comes in tomorrow so I will look it all over and see if I can live with the two piece set up or order the Talleys. I have a set of medium rings now, and it appears that if I want to get that scope any lower I might have to remove the buckhorn but I will start playing with it and come back as needed! thanks!
1 x
Conservation is a state of harmony between men and land.
~Aldo Leopold

User avatar
Goodbye Middle Class
Wrangler
Posts: 56
Joined: Wed Apr 08, 2020 6:02 pm
United States of America

Re: minimalist base(s)/rings please help

Post by Goodbye Middle Class » Sat Jan 16, 2021 11:47 am

I used Leupold PRW2 scope ring sets.

IMG_20200824_180306903~3.jpg
IMG_20200824_180306903~3.jpg (80.97 KiB) Viewed 1098 times

They'll give you a nice low profile minimalist but robust mount for your scope. They might work for you.


- Will
0 x

Post Reply