Page 1 of 1
Alliant Powders @ Midsouth
Posted: Mon Jan 14, 2019 10:28 am
by ESquared
Free Hazmat on Alliant Powder orders of $125+ at MidSouth Shooters Supply. Pretty extensive selection of 8lb-ers and even quite a few 4 lb, if you wanted to pick and choose.
I'm so new to all this, I'm hesitant to commit to 8 lbs of anything, but I might go cafeteria-style. All I'm working with so far is Unique and H110.
https://www.midsouthshooterssupply.com/ ... iant-8-lbs
Re: Alliant Powders @ Midsouth
Posted: Mon Jan 14, 2019 1:27 pm
by JEBar
that's good pricing .... $159 for 8 lb of Unique .... when all is said and done at Cabela's 8 lb cost something over $200
Re: Alliant Powders @ Midsouth
Posted: Mon Jan 14, 2019 3:33 pm
by ESquared
With my reloading focused on 357, maybe 45 LC and some 30-30 plinker loads, 8 lbs or Unique might be just the ticket!
Re: Alliant Powders @ Midsouth
Posted: Mon Jan 14, 2019 7:05 pm
by Rifletom
Evan, do you load for .38 spl? Unique would be excellent for .38 spl, .357, and .45 Colt. Not sure about 30-30 tho.
Already loaded up some 200gr rnfp and 250gr rnfp and Unique for my .45 Colt.
Re: Alliant Powders @ Midsouth
Posted: Mon Jan 14, 2019 7:10 pm
by Shakey Jake
Got their email this morning. Thinking about ordering some primers along with the powder as long there's free hazmat.
Re: Alliant Powders @ Midsouth
Posted: Mon Jan 14, 2019 7:13 pm
by ESquared
Rifletom wrote:Evan, do you load for .38 spl? Unique would be excellent for .38 spl, .357, and .45 Colt. Not sure about 30-30 tho.
Already loaded up some 200gr rnfp and 250gr rnfp and Unique for my .45 Colt.
No, Tom, just 357 through the BBS, and MrEd has given me some good guidance on Unique for 30-30. What brand boolits are you using for your 45LC?
Re: Alliant Powders @ Midsouth
Posted: Mon Jan 14, 2019 7:14 pm
by ESquared
Shakey Jake wrote:Got their email this morning. Thinking about ordering some primers along with the powder as long there's free hazmat.
Good call, Jake. Will add some to my list as well...
Re: Alliant Powders @ Midsouth
Posted: Mon Jan 14, 2019 9:39 pm
by Mistered
I too would not normally commit to any large quantity of one powder but due to previous 'events' the shelves in my local stores were nearly bare but one day an 8 lb. jug of Unique came in to one of them and I scored it - as well as laying in a heavy supply of other components for the potential of shortages continuing.
Well that all came to pass but no matter as most of what I am shooting regularly all load well with Unique so I'm pretty well fixed with powder for a while.
Re: Alliant Powders @ Midsouth
Posted: Mon Jan 14, 2019 9:47 pm
by Mistered
Not sure about 30-30 tho.
Unique has had quite a 'history' for being used to load reduced rounds not only in 30-30 but other cartridges as well.
I have previously mentioned using 12 grains of Unique with the Speer 100 grain Plinker bullets in 30-30 with excellent results. Low report and recoil but still clocking at about 1700 FPS at the muzzle and the accuracy is excellent.

- img002.jpg (113.48 KiB) Viewed 2549 times
Re: Alliant Powders @ Midsouth
Posted: Tue Jan 15, 2019 9:27 am
by Rifletom
ESquared wrote:Rifletom wrote:Evan, do you load for .38 spl? Unique would be excellent for .38 spl, .357, and .45 Colt. Not sure about 30-30 tho.
Already loaded up some 200gr rnfp and 250gr rnfp and Unique for my .45 Colt.
No, Tom, just 357 through the BBS, and MrEd has given me some good guidance on Unique for 30-30. What brand boolits are you using for your 45LC?
I'm using Missouri bullets; 250gr LRNFP, .452", Brinell hardness 12.
Mistered, that looks to be a good load with the Unique/100gr bullets in the 30-30. Excellent plinker load.
Re: Alliant Powders @ Midsouth
Posted: Tue Jan 15, 2019 10:31 am
by Flinch
Unique is good powder for light recoil 45-70 loads I shoot out of my Trapdoor.
Re: Alliant Powders @ Midsouth
Posted: Tue Jan 15, 2019 12:35 pm
by ESquared
Looks like this one:
http://missouribullet.com/details.php?p ... condary=14
Been wondering about the whole .452" vs. .451" diameter issue. Thanks for the tip! I may have a line on a good source for range brass in 45 Colt. Waiting for clarification on quantity/quality/cost.
Re: Alliant Powders @ Midsouth
Posted: Tue Jan 15, 2019 3:58 pm
by Rifletom
Yeah, .452" is what you'd want. Mine are the 250gr. In the "Reloading" section, I'm asking about Brinell 12 hardness in .45 Colt rifle barrels. Want to make sure I'm doing this right.