Spring has sprung. Get out and shoot your Henry
Loading FTX Bullets
-
- Tenderfoot
- Posts: 20
- Joined: Thu Apr 20, 2023 11:17 am
Loading FTX Bullets
I just acquired a Henry H010B 45-70. Looking up loads for the 325gr FTX bullets in the Hornady manual 9th edition (2012) it states the case trim length is 2.040" which is .055" shorter than normal trim length due to the longer ogive. Does anyone trim their brass that short? The book states the overall length to be 2.590".
0 x
- CT_Shooter
- Administrator emeritus
- Posts: 5157
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut
Re: Loading FTX Bullets
Congrats on your new rifle.
FTX ammunition does require shorter brass cases. You'll need to keep them separate from normal SAAMI length cases when using standard bullets.
FTX ammunition does require shorter brass cases. You'll need to keep them separate from normal SAAMI length cases when using standard bullets.
1 x
H006M Big Boy Brass .357 - H001 Classic .22LR - Uberti / Taylors & Co. SmokeWagon .357 5.5" - Uberti / Taylors & Co. RanchHand .22LR 5.5"
-
- Tenderfoot
- Posts: 20
- Joined: Thu Apr 20, 2023 11:17 am
Re: Loading FTX Bullets
I think it has to do with over-pressure concern. The FTX bullet with the flex tip is longer and needs to sit deeper into the case to meet COAL. Means there is more brass in contact with the sides of the bullet. So more pressure maybe needed to launch the bullet from an untrimmed case.
1 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
-
- Tenderfoot
- Posts: 20
- Joined: Thu Apr 20, 2023 11:17 am
Re: Loading FTX Bullets
"I think it has to do with over-pressure concern. The FTX bullet with the flex tip is longer and needs to sit deeper into the case to meet COAL. Means there is more brass in contact with the sides of the bullet. So more pressure maybe needed to launch the bullet from an untrimmed case."
I had to think about that for a minute for the way you explained. I think I get it...so...more neck tension creates more pressure?
I had to think about that for a minute for the way you explained. I think I get it...so...more neck tension creates more pressure?
0 x
- Vaquero
- Ranch Boss
- Posts: 10348
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: Loading FTX Bullets
Not in every circumstance, the 35 Rem uses standard length brass, this I know for sure ,andCT_Shooter wrote: ↑Thu May 04, 2023 5:25 pmCongrats on your new rifle.
FTX ammunition does require shorter brass cases. You'll need to keep them separate from normal SAAMI length cases when using standard bullets.
maybe the 30-30 also, but I've never seen those in person.
I don't shoot or load those style bullets.
Don't care for the meat damaged in hunting situations.
RP
1 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
-
- Tenderfoot
- Posts: 20
- Joined: Thu Apr 20, 2023 11:17 am
Re: Loading FTX Bullets
Funny, on the Hodgdon website reloading section they show the brass trim length 2.095" for the 325gr FTX.
0 x
- fortyshooter
- Ranch Foreman
- Posts: 6313
- Joined: Sat Dec 09, 2017 10:37 am
- Location: Va.
Re: Loading FTX Bullets
I have Hornady brass from spent 325 FTX factory ammo. The case length measures 2.045. A factory 325 FTX round measures 2.600 COL and a typical 405 gr. flat nose .45-70 round measures 2.520 COL. Hope this helps. Also think the shorter Horandy case was to keep the FTX round in a functioning case length for most rifles. They do the same thing for the Hornady FTX 45 Colt ammo by using shorter brass. Get that stuff mixed in with your standard brass makes for fun when reloading!
1 x
Re: Loading FTX Bullets
From another forum.
"The FTX rubber tip needs the shorter case because it would otherwise have to be seated below the cannelure"
"The FTX rubber tip needs the shorter case because it would otherwise have to be seated below the cannelure"
2 x
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
-
- Tenderfoot
- Posts: 20
- Joined: Thu Apr 20, 2023 11:17 am
Re: Loading FTX Bullets
Thanks that helps fortyshooter. Just finished cutting 15 of them to 2.044. I'll separate them in a different box that will be marked.
0 x