Thanks Al, I may have to take you up on your offer. Heading into town today including stopping into Sportsman’s Warehouse who I believe has some Speer. Bullets on hand. I’m also keeping an eye out for #11 caps for Redthies up in BC.
Spring has sprung. Get out and shoot your Henry
What did you do at your reloading bench today?
Re: What did you do at your reloading bench today?
1 x
Re: What did you do at your reloading bench today?
My BBS in 357 is supposed to be here today with a new Shilen barrel so Iam working up some light loads for use in Lever Silhouette. I found some data in Lee's reloading manual for loads using CFE Postol. i thought of using Unique but I have a limited supply and is harder to find than CFE. The barrel has a 1-14 twist instead of the 1-16 of the Henry barrel.
I loaded a ladder load of 3.6 grns to 4.4grns at .2grns apart with Missouri 140 zinger bullets and 5.3grns to 5.7grns with Beery's 158grn plated bullets. It does not take much to knock over a pistol caliber ram so I am looking only for accuracy.
I loaded a ladder load of 3.6 grns to 4.4grns at .2grns apart with Missouri 140 zinger bullets and 5.3grns to 5.7grns with Beery's 158grn plated bullets. It does not take much to knock over a pistol caliber ram so I am looking only for accuracy.
1 x
- Vaquero
- Ranch Boss
- Posts: 10440
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: What did you do at your reloading bench today?
Can't wait to see this new version, and a range report.leverjc wrote: ↑Thu Mar 09, 2023 1:21 pmMy BBS in 357 is supposed to be here today with a new Shilen barrel so Iam working up some light loads for use in Lever Silhouette. I found some data in Lee's reloading manual for loads using CFE Postol. i thought of using Unique but I have a limited supply and is harder to find than CFE. The barrel has a 1-14 twist instead of the 1-16 of the Henry barrel.
I loaded a ladder load of 3.6 grns to 4.4grns at .2grns apart with Missouri 140 zinger bullets and 5.3grns to 5.7grns with Beery's 158grn plated bullets. It does not take much to knock over a pistol caliber ram so I am looking only for accuracy.
![Wink ;)](./images/smilies/icon_e_wink.gif)
RP
0 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
![Laughing :lol:](./images/smilies/icon_lol.gif)
Ain't No Apologies for My Temperament
![Shocked :shock:](./images/smilies/icon_eek.gif)
Si vis pacem, para bellum
H001, H006, H012
- Vaquero
- Ranch Boss
- Posts: 10440
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: What did you do at your reloading bench today?
A 38 spl kind a day.
RP
RP
1 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
![Laughing :lol:](./images/smilies/icon_lol.gif)
Ain't No Apologies for My Temperament
![Shocked :shock:](./images/smilies/icon_eek.gif)
Si vis pacem, para bellum
H001, H006, H012
- Rifletom
- Deputy Marshal
- Posts: 3912
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory
Re: What did you do at your reloading bench today?
Ohhh, I see jug of "Clays" there. Such a great powder. Clays/38 spl is gonna be a fun load. In .45 acp also.
1 x
- Vaquero
- Ranch Boss
- Posts: 10440
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: What did you do at your reloading bench today?
Tom, I had 59 163 gr swc's, Hodgdon manual shows 2.8-3.1 for a 158 gr.
So I loaded these at 2.9.
Got rfn that weigh the same, gonna load 50 over some cfe pistol. Thinking about 4.9 grs for those.
I also ran a couple loads of brass through the tumbler.
RP
1 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
![Laughing :lol:](./images/smilies/icon_lol.gif)
Ain't No Apologies for My Temperament
![Shocked :shock:](./images/smilies/icon_eek.gif)
Si vis pacem, para bellum
H001, H006, H012
Re: What did you do at your reloading bench today?
Is this levergun 38 special ammo or you shooting it outa a 357 handgun
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
- Vaquero
- Ranch Boss
- Posts: 10440
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville
Re: What did you do at your reloading bench today?
A handgun, Al.
Gonna trying in the King Cobra, and the nephew has a 38 Rossi revolver that will eat most of it.
![Cool 8-)](./images/smilies/icon_cool.gif)
I don't really care about shooting a lot of 38 through the 357 rifle or KC.
![Wink ;)](./images/smilies/icon_e_wink.gif)
RP
2 x
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
![Laughing :lol:](./images/smilies/icon_lol.gif)
Ain't No Apologies for My Temperament
![Shocked :shock:](./images/smilies/icon_eek.gif)
Si vis pacem, para bellum
H001, H006, H012
Re: What did you do at your reloading bench today?
Working on prepping brass. Got 40 cases of 7mm-08 Rem., 40 cases of .44 Rem. and halfway to 40 cases of .243 Win. done today. Will finish the .243 cases and begin to fill 'em all up tomorrow during the snowstorm. What better way to pass time during a blizzard? Also, one eye on the forecast for a decent day to go out and empty them all! ![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
2 x
-
- Cowhand
- Posts: 280
- Joined: Sun Apr 02, 2017 11:10 pm